Nakamichi NSG6959 6x9" 4-Way Coaxial Speaker
Nakamichi Corp. Japan
Made in China
Product Overview
Nakamichi's NSG series speakers are engineered to provide clean and seamless sound performance. Utilizing selected materials, these speakers enable you to truly hear and feel the music in your vehicle.
Key Features
Composite Injection Cone
The treated composite injection cone is extremely rigid yet lightweight, allowing for the reproduction of even deeper and more powerful bass notes.
Silk Dome Tweeter
Silk is a lightweight, heat-resistant material that retains its shape even after prolonged use, ensuring accurate sound reproduction in all situations.
Rubber Surround
The rubber surround is treated to maintain a consistent level of sound reproduction during long periods of operation within your vehicle.
Specifications
| Specification | Details |
|---|---|
| Speaker Type | 6x9" 4-way |
| N-POWER | 70W (1pc), 140W (1pr) |
| Peak Power | 490W (1pc), 980W (1pr) |
| Sensitivity | 87±3dB |
| Impedance | 4Ω |
| Magnet Weight | 20 oz |
| Voice Coil | ASV Ø25mm |
| Mounting Depth | >3.3" (84mm) |
| Net Mass (1pr) | Approx. 2.8kg |
Installation Guide
General Instructions
1. Turn off the car ignition key.
2. Connect the speaker wires to the amplifier. Ensure correct terminal connections (e.g., '+' to '+' and '-' to '-'). Incorrect polarity will degrade sound quality. Consult the provided diagrams for reference.
3. Connect the provided speaker cord to the speaker terminal by holding the lower portion of the speaker terminal.
Mounting Procedure
1. Cut out the mounting template provided in the packing box.
2. Place the template on the selected mounting location and mark the cut-out area and four bolt holes. (Refer to Diagram 1: Speaker Components and Mounting Outline).
3. Cut out the marked area and drill the bolt holes. (Refer to Diagram 2: Cutting and Drilling).
4. Remove the speaker grille. (Refer to Diagram 3: Grille Removal). The speaker grille can be mounted without the grille if preferred.
Ensure that the speaker terminals do not interfere with any parts, such as the window frame or magnet panel. Also, ensure the speaker itself does not touch any surrounding parts, such as the window frame, magnet panel, or door handles.
Option: Mount on the Rear Tray
If mounting on the rear tray of your car, ensure nothing obstructs the speaker. If the rear tray board is already cut out, you may need to modify it.
Diagrams
Diagram 1: Speaker Components and Mounting Outline
This diagram illustrates the internal components of the Nakamichi NSG6959 speaker, including the woofer cone, tweeter, surround, and magnet structure. It also shows the outline for mounting the speaker and the placement of mounting holes.
Diagram 2: Cutting and Drilling
This diagram visually guides the user through cutting the marked area for speaker installation and drilling the pilot holes for mounting screws.
Diagram 3: Grille Removal
This diagram shows the process of removing the speaker grille, indicating how it attaches and detaches from the main speaker unit.
What's In The Box
- Speakers x 2pcs
- Frame x 2pcs
- Screw Ø4x30mm x 8pcs
- Gaskets x 8pcs
More Information
For warranty registration, downloads, and Nakamichi's complete range of products, visit:
