Nakamichi NSF624 6" 2-Way Coaxial Speaker

Key Features

Composite Polypropylene Cone

The treated composite polypropylene cone is exceptionally rigid yet lightweight, enabling the reproduction of deeper and more powerful bass notes.

Mylar Dome Tweeter

Mylar is a lightweight, heat-resistant material that maintains its shape even with prolonged use, ensuring accurate sound reproduction in all conditions.

Foam Surround

The foam surround is treated to maintain a consistent level of sound reproduction during extended periods of operation within your vehicle.

Specifications

• Speaker Type: 6" (14.8cm) 2-way coaxial
• Peak Power: 225 Watts
• N-Power: 35 Watts
• Sensitivity: 84 ± 3dB (dB/W/m)
• Frequency Response: 80 ~ 22000Hz
• Impedance: 4Ω
• Voice Coil: ASV Ø25.5mm
• Magnet Weight: 5.4 OZ
• Mounting Depth: 1.7" (44mm)
• Net Mass (1 pair): Approx. 1.0kg
• G.W.: Approx. 1.3kg
• Box Dimensions: 370(W)x185(D)x80(H) mm

Installation Guide

1. Turn off the car ignition key. Operating with the power on may generate click noise that could damage the speakers.
2. Cut out the mounting template from the packing box.
3. Paste the template onto the selected mounting location for the speaker.
4. Mark the cut-off hole and the 4 bolt holes.
5. Cut out the marked area and drill the bolt holes. A hole for mounting may already be present in the rear tray's inner panel; if so, modify the board accordingly.
6. Remove the speaker grille. The grille can be omitted if preferred.
7. Strip the speaker wires and connect them to the amplifier, ensuring correct polarity (+ to + and - to -). Reversed polarity will degrade sound quality. Connect the provided speaker cord to the speaker terminal while holding the lower portion of the speaker terminal.
8. Mount the speaker.
9. Press and insert the edges of the grille.

Mounting on the Rear Tray

Speakers can be mounted on the rear tray of your car. Ensure that no components obstruct the mounting location. Verify that the speaker terminals, frame, or magnet do not interfere with any inner parts (e.g., windows). Also, ensure the speaker grille does not touch any inner fittings (e.g., window cranks, door handles, armrests).

What's In The Box

• Speakers x 2pcs
• Frame x 2pcs
• Screw Ø4x20mm x 8pcs
• Gaskets x 8pcs

Connect With Us Online

Explore Nakamichi's complete range and find instructions, software downloads, and warranty registration at nakamichi.caraudio.com and nakamichi.global.

Compatible Products

Enhance your vehicle's audio system with Nakamichi's compatible products, including Active Woofers and Amplifiers.