CMF Watch Pro 2 User Manual

Getting Started

Scan the QR code ? to install the CMF Watch app.

Product Overview:

• Function button ⚙️
• Display ?️
• Heart rate and blood oxygen monitoring sensor ❤️
• Speaker ?
• Microphone ?
• Charging contacts ?

Wearing Instructions: For optimal heart rate measurement, wear the watch 1-2 finger widths away from your wrist bone. Ensure a comfortable fit, not too tight.

The watch and strap are made from materials safe for skin contact. If you experience skin discomfort, discontinue use and consult a doctor.

Charging

To charge your watch, place it on the charging dock. Ensure the two metal pads on the back of the watch align with the metal tips on the dock.

Before charging, wipe away any sweat or moisture residue to keep the watch's charging contacts clean.

Bezel Replacement

Removing the Bezel:

1. Gently press the sides of the bezel with your index finger and thumb, or press the entire bezel with your palm. Rotate it counter-clockwise at an angle (approx. 20 degrees) until it stops.
2. Pinch the bezel vertically with two fingers to remove it.

Precautions for Bezel Replacement:

• When removing the bezel counter-clockwise, avoid excessive force to prevent damage to internal structures.
• When installing clockwise, ensure the bezel is level and seated correctly on the watch body before rotating to prevent internal damage.
• It is not recommended to wear the watch without the bezel attached, as it may scratch skin or wear down internal components.
• The identification mark on the back of the bezel must align with the mark at the 12 o'clock position on the watch display. The CMF by Nothing logo should be positioned around the 7 o'clock mark. Then, rotate clockwise to tighten.
• Frequent removal and installation of the bezel can cause wear to internal structures, leading to issues with tightening or loosening. This is a normal phenomenon. Ensure a reasonable frequency of removal and installation to extend the lifespan of the bezel.

Installing the Bezel:

1. Pick up the bezel and align the mark on its inner side with the mark at the 12 o'clock position on the watch display.
2. The CMF by Nothing logo should be positioned at the 7 o'clock mark on the watch display. Place it horizontally and secure it to the watch body.
3. Press the sides of the bezel with your index finger and thumb, or press the entire bezel with your palm. Rotate it clockwise with slight force until you hear a distinct click or snap, indicating it is in place.

Strap Replacement

To remove and replace the strap: Flip the watch over and locate the quick-release lever. There is one at each end where the strap connects to the frame. Slide and hold the quick-release lever to detach the strap from the watch, or to attach a new strap.

Pairing and Connection

Enter Pairing Mode: Press and hold the function button on the side to power on the watch.

Download the CMF Watch App: Scan the QR code ? or search for "CMF Watch" in the Google Play Store (Android) or App Store (iOS) and download it.

Setup and Pairing:

• Tap the plus icon ➕ in the CMF Watch app to add a device.
• Select the watch from nearby devices, or scan the QR code on the watch screen to pair.

Note: Upon first connection, the app will guide you through enabling certain permissions. We recommend enabling all relevant permissions requested by the app to ensure the watch functions correctly.

Operation

On the Main Screen:

• Swipe down ⬇️ to expand Quick Settings.
• Swipe up ⬆️ to view Notifications.
• Swipe left ⬅️ to view Widgets.
• Swipe right ➡️ to view Widgets or go back to the previous page.
• Press and hold ⏺️ to change the watch face.
• Cover the watch with your palm to turn off the display.

Rotating the Crown:

• Rotate Up ⬆️: Scroll up or go to the previous screen.
• Rotate Down ⬇️: Scroll down or go to the next screen.

Pressing the Button:

• Press Once ▶️: Wake the watch, open the function list, pause or resume a workout, or go back to the previous page.
• Press and Hold ⏺️: Power on, power off, or restart the watch. Press and hold for 10 seconds for a forced restart.

Gesture Control:

Gesture control is off by default. To enable it, connect the CMF Watch App to your watch. After connecting, navigate to the Gesture Control function to turn it on and set related options. For more features, connect your watch to the CMF Watch app to view and set more detailed information on the watch or within the app.