Jisulife FA55 Handheld Fan User Guide

Product Overview

The Jisulife FA55 is a handheld fan designed for personal cooling. It features multiple speed settings, LED indicators, and comes with various accessories for different usage scenarios.

Parts Description

The fan consists of the following parts:

• 1 - Wind speed indicator
• 2 - Power percentage
• 3 - Display screen
• 4 - Air outlet
• 5 - Ambient light
• 6 - Non-polar conversion wheel
• 7 - Power On/Off button
• 8 - Air inlet
• 9 - Type-C input port
• 10 - Light On/Off, Mode switch button
• 11 - Lanyard hole
• 12 - Round nozzle
• 13 - Square nozzle
• 14 - Base

Diagram Description: The diagram shows the fan with numbered parts corresponding to the list above. It also illustrates the air inlet and outlet, the power button, the USB-C port, and the lanyard hole.

Before Use

1. Check the product and power cord for any damage. Ensure they are in good condition before assembly and operation.
2. Before charging, verify that the power source voltage is compatible with the product's specifications.
3. Do not disassemble or modify the product. For repairs, contact an authorized service center.
4. Do not block the air inlet or outlet.
5. Keep hair, clothing, and other items away from the air inlet due to its strong suction.

How to Use

A. Power/Speed/Light Controls

• Power On/Off Button: Long press to turn the fan on or off. The fan defaults to the lowest speed upon startup. A long press exceeding 3 seconds will initiate an auto-shutoff. Double-press to check the current battery percentage, which will dim and disappear after 5 seconds.
• Non-Polar Conversion Wheel: Rotate the wheel to increase or decrease wind speed from 1 to 100. When ambient lights are on, the brightness adjusts with the fan speed.
• Light On/Off, Mode Switch Button: Short press to cycle through light modes: constant light, breathing light, dark mode, and SOS mode. Long press to turn off the ambient light. In power-off state, short press to toggle SOS mode.

Note: For safer operation, the maximum fan speed adjustment is limited to level 1 when charging.

B. Using Accessories

The fan comes with three accessories for different situations. The diagram shows how to attach these accessories to the fan's gimbal.

Indicator Status Description

Input Safety

• Power Off State: Automatically disconnects after 12 hours of continuous charging.
• Power On State: Automatically shuts off after 10 hours of continuous charging and disconnects after an additional 2 hours. To recharge, unplug and replug the input port.

Product Cleaning

1. Ensure the product is powered off before cleaning.
2. The fan's mask cannot be removed. Clean the surface of the fan cover and air inlet grille with a clean cloth and brush.
3. Do not use water or other liquids to clean electrical components like the motor or power switch.
4. Do not touch the power source or electrical components with wet hands or a wet cloth.

Battery Removal

Before disposing of the product, remove the battery. Ensure the product is powered off before battery removal. Dispose of the battery safely according to local regulations.

1. Use a tool to pry open the bottom cover of the handle and remove the internal screws (Figure 1).
2. Remove the handle (Figure 2).
3. Unplug the battery connector, remove the battery, and dispose of it safely according to local regulations (Figure 3).

Diagrams: Figures 1, 2, and 3 illustrate the steps for battery removal.

Safety Precautions

To ensure safe usage and prevent injury or property damage, please adhere to the following safety precautions. Improper use may lead to accidents:

• This product is not a toy. Do not allow children to play with it unsupervised. Children under 14 should use it under adult supervision.
• The product is not intended for use by individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are supervised by a person responsible for their safety.
• Avoid prolonged use of the fan, especially for infants and the elderly, to prevent adverse health effects.
• Do not insert fingers, sharp objects, or metal items into the fan to avoid damaging the fan or causing injury.
• Do not use the fan with wet hands or a damp cloth to prevent electric shock.
• The product is not waterproof. Do not wash it directly with water. Avoid using it in bathrooms or humid environments. Dry the product thoroughly before use. Do not immerse the product in water.
• Do not cover the air outlet or air inlet with clothing, towels, etc., to prevent damaging the fan.
• Do not use the fan in high-temperature environments (above 60°C) or confined spaces like greenhouses, construction sites, near heaters, or in open-top cars to prevent damage or injury.
• Do not squeeze, disassemble, or expose the battery to high temperatures (above 60°C) for extended periods, as this may cause liquid leakage or explosion.
• When using a power adapter for charging, ensure it meets the specified voltage and current requirements (5.0V-2.0A) and has national safety certification.
• This product uses a lithium-ion battery without a memory function. Overcharging or over-discharging can affect battery life. Charge the battery fully and disconnect the power promptly if not used for over 3 months.
• If the product emits smoke, fire, or other malfunctions occur, immediately turn it off and send it to the dealer or manufacturer for service. Do not attempt to disassemble the product yourself.
• Do not bend or pull the power cord while charging to avoid damaging the cord.

Package Contents

• Brand: Jisulife
• Product Model: Handheld Fan Ultra1
• Product Name: Handheld Fan Ultra1
• Input: 5.0V-2.0A/9.0V-2.0A/12.0V-1.5A
• Battery Capacity: 9000mAh

The contents of this user manual and product specifications are subject to change without prior notice.

Manufacturer: Shenzhen Jisu Technology Co., Ltd

Address: 301, Building A, No. 8, Changjiangpu 2nd Road, He'ao Community, Yuanshan Street, Longgang District, Shenzhen

Importer: AZ-TEK VIETNAM TRADING AND IMPORT-EXPORT CO., LTD

Addresses:

• Ho Chi Minh City: 329 Phan Xich Long, Ward 1, Phu Nhuan District, Ho Chi Minh City
• Hanoi: No. 26 Alley 62 Nguyen Chi Thanh, Lang Thuong, Dong Da, Hanoi