GE RealMAX® Platinum 40-Gallon Tall Natural Gas Atmospheric Water Heater

Dimensions and Installation Information (in Inches)

Local Installation Regulations: This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code (ANSI/NFPA 70). The National Electrical Code is available from some local libraries or can be purchased from the National Fire Prevention Association, Batterymarch Park, Quincy, MA 02169.

Installation Information: For complete information, see the installation instructions packed with your water heater.

Power Requirements: Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements.

Location: Locate the water heater in a clean, dry area as near as practical to the area of the greatest heated water demand. Long uninsulated hot water lines can waste energy and water.

Required Clearances: There must be sufficient clearance between any object and the top, rear, and sides of the water heater in the event service is needed. The controls and drain at the front of the unit must have clear access for operation and service. Installations that require minimal clearance on the sides or rear of the water heater for earthquake straps are also acceptable. In these cases, additional clearance should be provided on the opposite side of the unit to allow for service access.

Diagram Description: The diagram shows a typical installation of the water heater. Key components labeled include: Hot Water Outlet to fixtures, Unions, Manual Gas Shut-off Valve, Vent Pipe to Chimney, Vent Hood, Thermal Expansion Tank, Shut-off valve, Cold Water Supply, Temperature and Pressure Relief Valve, Sediment Trap, Drain Valve, Combustion Air Inlets, and the Relief Valve discharge location.

The overall height of the unit is indicated as 57-1/4 inches.

Certifications: Listed by Underwriters Laboratories. Certified to NSF/ANSI 372. See http://info.nsf.org/Certified/Lead_Content/ for specific model listing.

Features and Benefits

• Real Capacity: Provides a true 40 gallons of water, offering more hot showers compared to other 40-gallon gas steel tank water heaters per DOE rated gallon capacity.
• Leading Performance: Delivers up to 84 gallons of hot water in the first hour of use (Measured through DOE First Hour Rating), providing best-in-class comfort.
• Household Size: Suitable for families of 2 to 4 persons.
• Quick Recovery: Features a max-performance 40K burner for rapid replenishment of hot water.
• Anode Rod: Durable design offers long-lasting protection against corrosion, extending the tank's life.
• SmartShield™ Safety System: Monitors surrounding air and automatically shuts off the unit if abnormal temperatures are detected.
• Self-Diagnostic: Monitors and reports on gas system status via an LED status indicator.
• Brass Drain Valve: Rust-proof construction ensures long-lasting service.
• Easy Installation: Designed for quick and easy replacement of older water heaters using standard water and gas connections.
• Built-To-Last Warranty: RealMAX™ Platinum water heaters come with a 12-year limited warranty on the tank and parts*.

*See written warranty for full details.

Model: GG40T12BXR

Color: Diamond Gray

Support

For answers to your GE Profile™ or GE Appliances product questions, visit geappliances.com or call GE Answer Center® Service at 800.626.2000.