OBDLink MX+ Quick Start Guide

Getting Started with OBDLink MX+

Follow these steps to connect your OBDLink MX+ device:

Download the OBDLink App: Visit www.obdlink.com/apps or scan the QR code to get the app.
Connect the Device: Plug the OBDLink MX+ into your vehicle's OBD port. The OBD port is typically located in the driver's footwell.
Power On: Turn the ignition key to the "Key On, Engine Off" position.
Pair via Bluetooth: Press the "Pair" button on the OBDLink MX+ and then select "OBDLink MX+" from your phone's Bluetooth settings.
Connect in App: Open the OBDLink app and tap "Connect".

Enhanced OEM Add-Ons

Explore enhanced OEM add-ons for your vehicle. Tap the "Vehicle Editor" icon in the app or visit www.obdlink.com/oem to check vehicle eligibility for free OEM upgrades.

Troubleshooting

Unable to pair:

Ensure the "Pair" button is pressed and the Bluetooth LED is blinking rapidly. If issues persist, disconnect your phone from other Bluetooth devices.

Unable to connect to vehicle:

Verify that the vehicle's ignition is in the "On" position.

OBDLink device not appearing in phone's Bluetooth list:

Perform a factory reset by pressing and holding the "Pair" button for over 15 seconds until the power LED flashes rapidly. Then, proceed to step 4.

Firmware update failed:

Open the OBDLink app, go to "Settings" > "Firmware Updates". Tap the menu (often represented by "...") and select "Firmware Recovery". Confirm by tapping "Yes". Ensure your OBDLink device is selected and tap "Update Firmware". A "OBDLink Device Not Found" pop-up is normal if no devices are registered; tap "OK".

Regulatory Compliance

OBD Solutions, LLC confirms that the "OBDLink MX+" product complies with:

Reach EC No 1907/2006
ROHS Directive 2011/65/EU
EU Radio Equipment Directive (2014/53/EU)
EU Electromagnetic Compatibility (2014/30/EU)

Frequency Spectrum: Min 2400 MHz, Max 2483.5 MHz

Radio Transmission Max Output Power: +6dBm

CE Conformity Date: September 16, 2018

FCC ID: X3ZBTMOD4

IC: R 007-AH0212

Other Certifications: CE, ROHS, (E8) 10R-05 8941

Share Your Experience

If you're happy with the product, please consider leaving a review on Amazon. You can also connect with us on social media:

Facebook: facebook.com/obdlink
Twitter: twitter.com/obdlink

If you encountered any issues, our support team is ready to help. Contact us at obdlink.com/support or support@obdlink.com.

	OBDLink MX Bluetooth Android Quick Start Guide A quick start guide for connecting the OBDLink MX Bluetooth adapter to an Android device, covering app installation, Bluetooth pairing, and initial setup for vehicle diagnostics.
	OBDLink LX Bluetooth: Android Quick Start Guide A concise guide to setting up and using the OBDLink LX Bluetooth adapter with your Android device, including app installation, pairing, and connecting to diagnostic software.
	OBDLink MX+ Enhanced Diagnostics Support Guide Discover the comprehensive OEM-specific diagnostic capabilities and extensive vehicle compatibility of the OBDLink MX+ device, detailing supported modules and model years for a wide range of automotive manufacturers.
	OBDLink SX Quick Start Guide for Windows A step-by-step guide to installing and connecting the OBDLink SX USB adapter with OBDwiz software on Windows computers for automotive diagnostics.
	OBDLink MX+ Enhanced Vehicle Diagnostics Coverage Guide Explore the extensive OEM-specific enhanced diagnostics support provided by the OBDLink MX+ automotive scan tool. This guide details vehicle coverage, including supported modules and diagnostic capabilities for a wide range of car makes and models.
	OBDLink EX: Getting Started Guide and Limited Warranty Information Learn how to get started with your OBDLink EX OBD scanner, including setup, connection, and details on the three-year limited warranty provided by OBD Solutions.
	OBDLink CX Getting Started Guide A concise guide to setting up and using the OBDLink CX Bluetooth OBD-II interface, including regulatory compliance information and step-by-step connection instructions.
	OBDLink MX Wi-Fi: High-Performance Wireless OBD-II Scanner The OBDLink MX Wi-Fi is a professional-grade automotive scan tool that transforms your iOS, Android, or Windows device into a sophisticated diagnostics tool and performance monitor. It offers unparalleled speed and functionality for vehicle diagnostics.