SECTION 3
KD-75X9*H / FW-75BZ40H
Sony CONFIDENTIAL For Authorized Servicer
Important Safety Precautions:
⚠️ Place the TV set facing downwards on a stable, level surface before disassembly and assembly of parts.
⚠️ Parts marked with '!' and shaded parts are critical for safety. Replace only with the specified part number.
⚠️ Parts contain confidential information. Strictly follow the instructions whenever components are repaired and/or replaced.
3-4 EXPLODED VIEW AND PART LIST
The main exploded view illustrates the internal and external components of the television. Parts are numbered from 1 to 19 to indicate their position and disassembly sequence.
Part 1: A small component located on the lower left exterior.
Part 2: Appears to be a screw or fastener.
Part 3: A structural component, possibly a mounting bracket or base element, situated at the bottom.
Part 4: The large, primary rear cover of the television.
Part 5: A metal bracket or support structure, positioned internally.
Part 6: Another metal bracket or support structure, positioned internally.
Part 7: Likely a ribbon cable or internal wiring connector.
Part 8: A printed circuit board (PCB) or electronic module.
Part 9: Another printed circuit board (PCB) or electronic module.
Part 10: Appears to be a screw or fastener.
Part 11: A printed circuit board (PCB) or electronic module.
Part 12: A printed circuit board (PCB) or electronic module.
Part 13: An internal component located in the upper section.
Part 14: An internal component located in the upper section.
Part 15: An internal component located on the side.
Part 16: An internal component located on the side.
Part 17: A mounting point or bracket, likely for securing internal components.
Stand Components
A separate illustration details the television stand, showing two main components numbered 18 and 19, which attach to the base of the TV.
Notes:
(*) Parts marked with an asterisk (*) are not stocked as they are seldom required for routine service. Some delays should be anticipated when ordering these components.
The picture provided in this section might have slight differences from the actual sets.
The reference number beside each part indicates the disassembly sequence.
Action required before disassembly: Remove screws. Unplug connectors.
SMART CORE
PART LIST
An illustration shows the SMART CORE assembly, with components numbered 1 through 6.
REF. NO | PART NO. | DESCRIPTION | REMARKS |
---|---|---|---|
1 | 5-009-259-13 | COVER, TOP(BNN) | Compatible |
2 | 5-016-947-22 | OP, INNER(BNN) A | Compatible |
2 | 5-016-947-71 | OP, INNER(BNN) A ( Optional ) | |
2 | 5-016-947-41 | OP, INNER(BNN) A ( Optional ) | |
3 | A-5015-205-A | COMPL SVC HT1_4K_CT_NX | |
4 | A-5015-396-A | HT1_4K_CT_CTTI_NX | |
5 | 5-009-264-11 | MOUNT ( Optional ) | |
6 | 5-009-265-11 | LIGHT, GUIDE ILM(BNN) | |
7 | 5-009-262-11 | LIGHT, GUIDE OPT(BNN) | |
8 | 5-009-262-11 | COVER, BTM(PCH) |