Miroir M600 Full HD Pro Projector - Quick Start Guide
IMPORTANT PLEASE READ: The Battery and Charging circuit has been suspended in shipping to protect the battery and provide maximum performance. To activate the charging circuit, plug your AC Adapter into an outlet and the projector, open the lens cover, wait for the lens to project the setup guide, close the lens cover and start charging your projector. You are ready to charge and project!
Device Overview
The Miroir M600 Full HD Pro Projector features the following ports and controls:
- A: Battery Indicator Lights: Lights flash in turn as the device charges. The battery is fully charged when all the lights illuminate and no longer flash.
- B: Lens Cover: Slide open to turn power on/off.
- C: Audio Out (3.5mm): Optional connection for external speakers or headphones.
- D: HDMI Video Input: Connect an HDMI cable to a device with HDMI video output.
- E: USB Power Output: Connect a USB power cable to power a HDMI streaming stick or charge a smartphone battery. Not for video input.
- F: USB-C Video/Charge Input: Connect a compatible USB-C charge/video cable to a device with USB-C video output or a power adapter. (USB-C cable not included)
- G: Reset Button: Press to reset the projector.
- H: Power Port: Connect the included AC Adapter/Charger. Fully charge the battery before first use (approx. 4-5 hours).
- I: Mode Button: Long press to switch between ECO and Normal modes. Normal mode offers maximum brightness but shorter battery life.
- J: Controls: Increase/decrease projector volume.
- K: Focus Controls: Turn wheel to adjust focus.
- L: Rubber Foot Pads: Provide stability and proper airflow to cooling vents.
- M: Tripod Mount: Fits a standard tripod screw. Tripod not included.
- N: Cooling Vent: IMPORTANT: Do not cover or block airflow to the vent.
Troubleshooting
The image is blurry
- Adjust the focus wheel forwards or backwards.
- Ensure the projection surface is smooth and non-reflective.
- Check that the projector lens is clean and free of debris.
The image is not square
- Ensure the projector lens is parallel to the projection surface and that the surface is flat.
No sound
- Check the volume on your source device.
- Check the volume on the projector.
- If using an adapter, verify it supports audio.
- Ensure the HDMI cable is fully plugged into the HDMI port.
No Signal Message
- Verify you are using the required cable and/or adapter.
- If using a digital AV adapter, ensure it's an authentic Apple adapter compatible with your device.
- If connecting via USB-C, ensure you are using a cable labeled "USB-C Video". Some USB-C cables do not support video.
- If connected to a laptop or computer, check your display settings for a multiple display option (e.g., "mirror these displays").
- Confirm your source device supports HDMI video out or USB-C video out.
Projector will not power on, or stay powered on
- Briefly press the power button to check the battery level. If one or fewer lights illuminate, charge the battery with the USB-C cable or power adapter.
Support
For help, text the Miroir support team directly at +1 (855) 676-0972 (World Wide Toll Free). You can also download your manual at: MIROIRUSA.COM/M600-MANUAL