ROVSUN Food Warmer Display Installation Schematic and Assembly Instructions
Installation Schematic Overview
This document outlines the installation process for the ROVSUN Food Warmer Display. Key components are identified and referenced in the assembly steps.
Component Identification:
Page 1 Components:
- 1: Bottom Base
- 2: Glass Clasp
- 3: Bottom Cover Plate
- 4: Water Basin
- 5: Upright Post
- 6: Bevel Post
- 7: Middle Plate
- 8: Top Cover
- 9: Arc Plate
Page 2 Components:
- 10: Grid Shelf Support Bar
- 11: Grid Hanging Plate
- 12: Grid Shelf
- 13: Bevel Glass
- 14: Door Handle
- 15: Side Glass
- 16: Upright Glass Door
Installation Notes:
- Install the bevel post on a cambered surface.
- Fix the post with 4*8 tapping screw.
- Fix the post with 5*10 socket head screw.
- Fix the door handle with 4*10 gasket screw.
Assembly Instructions
- Install the upright post and bevel post onto the middle plate and bottom cover plate, and fix them securely. (Refer to schematic views A-A, B-B, C-C).
- Assemble the grid shelf with support bars and hanging plates. (Refer to schematic view D-D).
- Install the side glass. Twist the glass clasp, unscrew the screw, insert the glass, and lock with the screw tightly. (Refer to schematic view E-E).
- Install the door handle. Then, install the upright glass door and bevel glass from top to bottom, inside to outside. Note: The bevel glass is taller than the upright glass.
