Vodafone GigaCube MC888 Ultra
Quick Start Guide and Product Safety Information
Before You Get Started
What's Included in Your Box
- Vodafone GigaCube
- Welcome card
- Quick Start Guide and Product Safety Information
- Power adapter
Location of the GigaCube
Place your GigaCube near a window to ensure the best signal strength. Avoid placing it near concrete or wooden walls, electrical appliances (like microwaves, refrigerators), or satellite antennas, as these can weaken wireless signals.
⚠️ Only use the power adapter provided in this box. Unapproved power adapters could cause damage to the device.
Device Overview
Front/Top View:
- 1 WPS Button: Press to activate the WPS function.
- 2 Phone Port: Connect to a telephone (service may not be included in your plan).
- 3 LAN Ports: WAN/LAN1 (2.5G) and LAN2 (1G) for connecting PCs.
- 4 Power Port: Connect the power adapter here.
- 5 Nano SIM Slot and Reset Hole: Insert your nanoSIM card. The reset hole allows you to press and hold for about 3 seconds to restore factory settings.
Getting Started
1. Prerequisites
- A valid nano-SIM card.
View the label on your device for default information (e.g., SSID, password).
2. Insert the nanoSIM Card
Open the slot cover at the bottom of the device and insert the nanoSIM card correctly oriented into the slot.
Please note: Do not remove the SIM card when your 5G GigaCube is in use, otherwise you will lose connectivity.
3. Power On Your Device
Follow the illustration to plug in the power adapter. Once connected to a power outlet, your 5G GigaCube will automatically power on. Indicator lights will turn on when the GigaCube has successfully connected to a network.
Indicator Lights
- Power LED:
- (Solid white): Power is on and external power supply is working normally.
- (Off): Power is off.
- WiFi LED:
- (Solid white): WiFi works normally.
- (Blinking white): WPS is in progress.
- (Off): WiFi is off.
- Internet LED:
- (Solid red): The device is in error status, not registered to the mobile network, no nanoSIM card inserted, or no network service available.
- (Solid blue): The device is registered to the 4G/3G mobile network.
- (Solid white): The device is registered to the 5G mobile network.
Access the Internet
Via WiFi
Obtain the default WLAN SSID (WiFi name) and WLAN Key (password) from the device label. Connect to this WiFi network with your mobile device to access the internet.
Optional Configurations (Ethernet)
Connect one end of an Ethernet cable to either of the two LAN ports (LAN1 or LAN2) on the device, and the other end to your laptop or other devices. Up to two devices can be connected via LAN ports.
Change Your Device Settings
You can change device settings by logging into the web page:
- View the device label for the default website password.
- Launch your internet browser and enter
http://giga.cube
in the address bar. - Enter the WebUI Password (found on the Device Label sticker on the bottom of the GigaCube) and select Login.
- Once the web page is open, you can change the WiFi SSID, password, or other settings.
Troubleshooting
I cannot access the internet at all.
- Check your configuration settings.
- Wait 1-2 minutes for the device to initialize.
- Check your internet indicator light.
I cannot visit the web page.
- Ensure you enter the correct URL:
http://giga.cube
. - Use only one network adapter in your PC.
- Do not use any proxy server.
The download/upload speed is very slow.
Your internet speed depends on signal strength and network utilization. Check your signal strength and network type.
I cannot establish the WiFi connection between my device and the client.
- Make sure the WiFi function is active.
- Refresh the network list and select the correct SSID on your mobile device.
- Check the IP address to ensure your client can obtain an IP address automatically in the Internet Protocol (TCP/IP) properties.
- Type the correct network key (WiFi password) when you connect to the device.
Problems with the passwords.
- For the default WiFi connection password and the default web page password, check the label on the device.
- If you have changed the passwords and forgotten them, you need to restore the device to the factory default settings.
Product Safety Information
PLEASE READ THIS SAFETY INFORMATION BEFORE YOU USE THE DEVICE. Following these warnings will help prevent injury to yourself or others and damage to your device.
Pictograms and Graphic Symbols
- ⚠️ Choking Hazard: This device contains small parts. Not intended for young children; ensure strict supervision if a child uses it.
- ? Loud Sound: This device may produce a loud sound.
- ? Flammable Liquids: Do not use while refuelling or near gas or flammable liquids.
- ? Water Exposure: Avoid contact with liquid; keep dry.
- ? Disassembly: Do not try to disassemble the device or accessories; only authorized personnel should service them.
- ✅ Accessories: Only use approved accessories.
- ? Magnetic Media: Avoid contact with magnetic media.
- ?️ Temperature: Avoid extreme temperatures.
- ❤️ Medical Devices: Keep away from pacemakers and other personal medical devices.
- ? Hospitals/Medical Facilities: Switch off when instructed.
- ✈️ Aircraft/Airports: Switch off when instructed.
- ? Explosive Environments: Switch off in potentially explosive environments (e.g., fueling areas, chemical storage).
- ? Emergency Communications: Do not rely on this device for emergency communications.
RF Exposure
Your device transmits and receives radio frequency (RF) energy. To comply with international guidelines, use the device with a minimum separation of 20 cm from the body. The World Health Organization (WHO) provides information on RF exposure, suggesting that limiting call length or using hands-free devices can help reduce exposure.
Further information is available from the WHO: who.int/mediacentre/factsheets/fs193/en/
Regulatory Information
Vodafone declares compliance with EU Directive 2014/53/EU and UK Radio Equipment Regulations 2017. Full Declarations of Conformity are available at: vodafone.com/MC888Ultra/conformity-declaration
Ecodesign and Energy: Products comply with the Energy-related Products (ErP) Directive. Networked standby power consumption is below 8W.
WEEE Approval: This device complies with the Waste Electrical and Electronic Equipment Directive 2012/19/EU. ♻️ Do not dispose of this device or its battery in municipal waste; use designated collection points for recycling.
Restriction of Hazardous Substances: Complies with local regulations (e.g., RoHS).
Licenses: This equipment may be operated in all European countries. The 5150-5350 MHz band is restricted to indoor use only.
Distraction
Using the device for communication or media playback can distract from activities requiring full attention and reduce environmental awareness.
Operating Machinery
Full attention must be given to operating machinery to reduce the risk of accidents.
Product Handling
You are responsible for how you use your device. Always treat it with care, keep it clean, and avoid:
- Open flames or lit tobacco products.
- Liquid, moisture, or high humidity.
- Dropping, throwing, or bending.
- Harsh chemicals or aerosols.
- Painting.
- Disassembly (only authorized personnel).
- Extreme temperatures (-20°C to +45°C).
- Relative humidity between 5% and 95%.
Thunderstorms: Do not use during a thunderstorm. Remove the mains power pack from the wall socket.
Small Children
Keep the device and accessories away from small children to prevent injury or accidental damage. The device contains small parts that could cause injury or become a choking hazard.
Demagnetization
Keep electronic devices or magnetic media away from the device to avoid demagnetization and potential sensor malfunction.
Electrostatic Discharge (ESD)
Do not touch the SIM card or memory card metal connectors.
Installation Conditions for Usage
This product is suitable for indoor use only, at temperatures not exceeding 45°C. Avoid direct sunlight, heat, or excessive moisture. Ensure 7-10 cm (3-4 inches) of space around the product for ventilation. Do not use near water (bathtub, sink, pool, etc.). Immediately switch off and disconnect from the mains supply if:
- The product contacts liquid.
- The product does not operate normally.
- The product is damaged (e.g., dropped).
- The product feels excessively hot or shows an overheating warning.
- Smoke is seen or smelled.
- The power cord or plug is damaged.
Power Supply
Connect the power supply and switch on only when instructed. Power supply must be Class II, Limited Power Source, tested and approved to national/local standards.
Emergency Calls
This device, like any wireless device, cannot guarantee connection in all conditions. Never rely solely on it for emergency communications.
Device Heating
The device may become warm during normal use. Do not use if overheated.
Electrical Safety
Accessories: Use only approved accessories and chargers. Avoid touching electrical contacts with metal objects (coins, key rings). Do not touch the device or power cord with wet hands. Do not disconnect the charger by pulling the cord.
Faulty and Damaged Products: Do not attempt to disassemble. Service by qualified personnel only. If submerged, punctured, or dropped, have it checked by an authorized service center.
Interference: Take care when using near personal medical devices like pacemakers and hearing aids.
Pacemakers: Maintain a minimum separation of 20 cm.
Hearing Aids: May experience interference; consult manufacturer for alternatives.
Medical Devices: Consult your doctor to determine if your device may interfere with medical equipment.
Hospitals: Switch off as requested to prevent interference with sensitive medical equipment.
Aircraft: Switch off as instructed by airport/airline staff.
Explosive Environments: Obey posted signs to turn off wireless devices in areas with potentially explosive atmospheres (e.g., petrol stations, chemical storage, grain/dust areas).
Blasting Caps and Areas: Turn off your device when in a blasting area or areas posted to turn off "two-way radios" or "electronic devices".
Disposal and Recycling
Contact Customer Services for information on safe and appropriate disposal or recycling of your device.
Adapters: Mains powered adapters operate between 0°C and 40°C. They comply with safety standards and the ecodesign directive. Use adapters only for their intended purpose.
General Information
Radio Frequency Bands and Power
- UMTS B1/8: 23 dBm
- LTE FDD B1/3/7/8/20/28/32(only DL): 23 dBm
- LTE TDD B38/41: 23 dBm
- 5G NR FDD n1/n3/n7/n8/n28: 23 dBm
- 5G NR TDD n78: PC2 25 dBm, PC3 23 dBm
- 802.11 b/g/n/ax 2.4GHz band: < 25 dBm
- 802.11 a/n/ac/ax 5.0GHz band: < 24 dBm
NOTE: This product is compliant with the power limits required by the European Union. Frequency bands supported vary by model.
Manufacturer: Vodafone Procurement Company S.à r.l., 15 rue Edward Steichen. L-2540 Luxembourg, Grand-Duché de Luxembourg.
Software Information
Product software version: CR_VDFEUMC888ULTRAV1.0.0B01 or later. Software updates will be released to enhance usability. The product contains Open Source Software. License information and source code access details are available on the informational page in the device's web interface.
Software Updates
By using this device, you agree to the following: To provide better service, the device will automatically check for/obtain software update information from Vodafone and its partners when connected to the Internet. This process may use mobile data and requires access to your device's unique identifier (IMEI/SN) and network ID (PLMN) for update management. Vodafone and its partners will not use IMEI/SN for personal identification.
Disclaimer
All contents are provided "as is". To the maximum extent permitted by law, Vodafone Procurement Company S.à r.l. is not liable for any special, incidental, indirect, or consequential losses. Maximum liability is limited to the purchase price of the product, except where prohibited by law for personal injury.
This product is compliant with the applicable security requirements of The Product Security and Telecommunications Infrastructure Act 2022. For the full Statement of Compliance or to report a vulnerability, visit vodafone.co.uk/Product-security.