Introduction
The SONOFF SNZB-01 is a compact wireless switch designed for smart home automation. It utilizes ZigBee technology to communicate with compatible hubs and devices, enabling remote control and scene automation.
This device can be connected to a SONOFF ZigBee Bridge to communicate with other devices. It can also work with other gateways supporting ZigBee 3.0 wireless protocols.
Getting Started
1. Download the App
To manage your SNZB-01 switch, download the eWeLink application from your device's app store.
[Download on the App Store]
[Get it on Google Play]
[QR code linking to eWeLink app download]
2. Remove Battery Insulation
Open the device casing and remove the battery insulation sheet to activate the switch.
Diagram Description: The first image shows a hand using a small tool to pull out a plastic tab from the side of the device. The second image shows the device with the tab removed, indicating it is ready for use.
Adding Devices
Pairing with a ZigBee Bridge
Note: Connect your ZigBee bridge to your network before proceeding.
Launch the eWeLink app, select your ZigBee bridge, and tap "Add" to begin pairing a new device. Then, press and hold the "RST" button on the SNZB-01 for 5 seconds until the LED indicator blinks three times. This signifies the device has entered pairing mode.
Troubleshooting: If pairing fails, ensure the device is close to the ZigBee bridge.
Diagram Description: The app interface shows a connected "ZBBridge" with "Added:0" and a prompt "No child device, please add." followed by an "Add" button. Adjacent to this, the SNZB-01 device is shown with its battery (CR2450, 3V) and reset button (RST) clearly marked.
Parameters
| Parameter | Specification |
|---|---|
| Model | SNZB-01 |
| Battery Model | CR2450 |
| Working Voltage | 3V |
| Wireless Connectivity | ZigBee (IEEE 802.15.4) |
| Operating Temperature | -10~40°C |
| Operating Humidity | 10-90% RH (non-condensing) |
| Material | PC |
| Dimensions | 43x43x16mm |
Device Structure
The SNZB-01 features a manual switch, a reset button, and an LED indicator.
Diagram Description: The front of the device displays a fingerprint-like icon representing the manual switch, along with labels for "Manual Switch", "Reset", and "LED Diode". The back of the device shows the locations for the RST button, LED, and the CR2450 3V battery, along with directional arrows for battery installation.
Device Features
The SNZB-01 is a versatile wireless switch that can be placed anywhere. When used with a compatible bridge, it can control multiple devices simultaneously.
- Low power consumption
- Low battery warning
- Smart scenes
Button Actions
Customize settings to assign specific functions to single presses, double presses, or long presses of the button, controlling connected devices accordingly.
Advanced Pairing & Management
Connecting Multiple Devices
A SONOFF ZigBee Bridge allows for the simultaneous connection of several devices.
Diagram Description: The eWeLink app screen shows the process of adding a device to the bridge. It progresses from "No child device, please add" to "Connecting", "Keep the device close enough to the hub.", a 25-second countdown, "Looking for device", and finally "3 devices Found".
To pair, turn on the bridge, navigate to its page in the eWeLink app, and tap "Add". Then, set up the device to be paired and wait for the process to complete.
Removing Paired Devices
To unpair a device, press and hold the reset button on the SNZB-01 for 5 seconds until the LED blinks three times. The device will then be disconnected from the bridge and removed from the app list.
Note: Users can also remove paired devices directly from the "sub-device" page within the eWeLink application.
Diagram Description: The back of the SNZB-01 device is shown, highlighting the RST button, LED, and CR2450 3V battery compartment.
Mounting Methods
1. Desktop Placement
Place the device on a flat surface like a desk.
Diagram Description: An illustration shows the SNZB-01 placed on a horizontal surface.
2. Surface Mounting
Peel off the protective film from the adhesive backing and attach the device to the desired location.
Diagram Description: An illustration shows the protective film being peeled off the back of the device, followed by an image of the device adhered to a vertical wall.
⚠️ Important: Do not mount the device on a metal surface, as it may interfere with wireless connectivity.
✔️ Recommendation: The device weighs less than 1kg. It is recommended to mount it at a height of less than 2 meters.
Simplified Declaration of Conformity
Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.
Address: Room 1001, 10F, Building 8, Lianhua Industrial Park, Longyuan Road, Longhua District, Shenzhen, GD, China
The product complies with the European Parliament and Council Directive 2014/53/EU of April 16, 2014, on the approximation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC.
The full Declaration of Conformity is available on the website: https://files.innpro.pl/SONOFF
Radio Frequency Information:
- WiFi: 2412-2472MHz
- ZigBee: 2405-2480MHz
- Maximum Radio Frequency Power: ≤20 dBm
Environmental Protection & Warranty
Environmental Protection: Used electronic equipment marked according to the European Union directive cannot be placed together with other municipal waste. It is subject to selective collection and recycling at designated points. Proper disposal prevents potential negative consequences for the environment and human health. Consult local authorities or retailers for disposal information.
The product meets the requirements of EU Directives concerning safety, health, and environmental protection.
This document is a translation of the original user manual.
Detailed warranty information is available on the website: https://serwis.innpro.pl/gwarancja
Company: Shenzhen Sonoff Technologies Co., Ltd.
Address: 1001, BLDG8, Lianhua Industrial Park, Shenzhen, GD, Chiny
Postal Code: 518000
Homepage: sonoff.tech
MADE IN CHINA
