ZEALOT-S67 Wireless Speaker Quick Start Guide
Product Overview
The ZEALOT-S67 is a portable wireless speaker designed for audio playback.
Packing Content
- ZEALOT-S67 Wireless Speaker
- USB-C Cable
- Quick Start Guide
Getting Started
Power On/Off
Press and hold the power button [power button] to turn the speaker on or off.
Charging
Connect the included USB-C cable to the charging port and a power source. The charging indicator [charging indicator] will show the charging status.
Wireless Connection
Turn on the speaker. On your device (phone, tablet), enable Bluetooth and search for "ZEALOT-S67". Select it to pair. Once paired, the connection will be automatic for subsequent uses.
Mode Switch
Use the mode switch button [mode button] to cycle through different modes or functions, such as equalizer settings.
Playback Controls
Use the playback buttons [play/pause button], [volume up button], [volume down button], and [next track button] to control music playback, adjust volume, and skip tracks.
PartyAdd Feature
To connect two ZEALOT-S67 speakers for stereo sound:
- Ensure both speakers are turned on and within 1 meter (approx. 3 feet) of each other.
- On one speaker, press the PartyAdd button [partyadd button]. A prompt tone will indicate successful activation.
- The second speaker will automatically connect to the first.
- On your device, connect to "ZEALOT-S67" via Bluetooth.
- Play music to confirm both speakers are playing in stereo.
Important Safety Information
Read this user manual carefully before use to ensure correct operation. For the first use, it is recommended to fully charge the device. Use and store the product at room temperature. Do not expose the product to fire, high temperatures, or direct sunlight. Keep the speaker volume moderate to avoid temporary or permanent hearing impairment. Do not use organic solvents or other chemicals for cleaning. Prevent small particles from entering the product. Do not disassemble or modify the product's structure or any part thereof. If the battery is not replaced correctly, an explosion accident may occur; only the same battery type can be replaced. The battery (battery pack) must not be exposed to sunlight, fire, or similar overheating conditions. Do not throw or drop the product to avoid damage.
Technical Specifications
| Feature | Specification |
|---|---|
| Wireless Version | 5.2 |
| Charging Voltage | DC 5V |
| Working Voltage | 7.4V |
| Transmission Distance | 10m |
| Frequency Range | 20Hz-20KHz |
| Speaker Configuration | Φ93mm*1 + Φ66mm*2 |
| Signal-to-Noise Ratio (SNR) | ≥95dB |
| Distortion | <1% |
| Weight | 1956g |
| Dimensions | 297*133*130mm |
Regulatory Compliance
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Canada Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
China RoHS
This electronic information product, under the conditions of use described in the manual, has a 10-year period during which the toxic or hazardous substances or elements contained within it will not leak, cause pollution to the environment, or cause serious damage to human bodies or property.
Hazardous Substance Table
| Component | Pb | Hg | Cd | Cr(VI) | PBB | PBDE |
|---|---|---|---|---|---|---|
| Printed Circuit Boards | o | o | o | o | o | o |
| Plastic and Polymer Parts | X | o | o | o | o | o |
| Standard Battery | X | o | o | o | o | o |
| User Manual | o | o | o | o | o | o |
Note: 'o' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirement specified by SJ/T 11363-2006. 'X' indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirement specified by SJ/T 11363-2008. Components marked with 'X' comply with EU Directive 2002/95/EC.
