01 Package Contents
- Smart Label Printer *1
- Label Paper Roll *1
- USB Type-C Cable *1
- Product Manual *1
02 Installation
Step 1: Press and hold the power button for three seconds to power on.
Step 2: Slide the door-open button to the left to open the paper compartment.
Step 3: Place the label paper in the paper compartment with the print side down and the first label protruding from the paper outlet. Then close the paper compartment.
Diagram Description: The printer's interior is shown, highlighting the cutting blade and printing surface. The label paper is inserted with the printing side facing down.
03 Download Software
To use this product, download and install the NIIMBOT app, available from Google Play or the App Store on Apple devices.
Download on the App Store | GET IT ON Google Play
More instructions can be viewed in the NIIMBOT app: Sign in to NIIMBOT > Me > Help Center > Hardware.
It is recommended to download the NIIM app for home use to unlock more functions for household printing.
04 Connecting to Print
Step 1: Once the app is downloaded, ensure your phone's Bluetooth is turned on. Note: Location permissions may need to be enabled on Android phones.
Step 2: Open the app and search for Bluetooth devices to connect to. Note: If it asks for a PIN, enter 0000 or 1234 then press OK.
Step 3: Once successfully connected, go to the Drawing Board.
05 Product Description
The NIIMBOT D110 features an indicator light and a power button.
Button Functions
| Operation | Function Description |
|---|---|
| Press and hold for 2-3 seconds | On or off |
| Quick press | This action can be set to "Don't feed paper," "Print current time," or "Print history" through the app. |
| Press twice | Print testing page |
Indicator Light
| Color | Status | Description |
|---|---|---|
| Blue | Solid | Powered on but not connected |
| Flashing quickly | Upgrading firmware | |
| Green | Solid | Bluetooth connected |
| Flashing quickly | Printing | |
| Red | Solid | Device fault |
Power Indicator Light
| Color | Status | Description |
|---|---|---|
| White | Blinking Slowly | Charging |
| Solid | Fully charged and connected to power | |
| Flashing quickly | Low battery |
06 Specifications
| Product | Label Printer | Model | NIIMBOT D110_M |
|---|---|---|---|
| Dimensions | 98*76*30mm | Weight | 149g |
| Charging Time | 3-4 hours | Input | 5V DC, 1A |
| Battery Capacity | 1500mAh | Printing Method | Thermal printing |
| Printing Resolution | 203dpi | Printing Width | 12mm |
| Connectivity | Bluetooth | Charge | Type-C |
| Transmit Power | 4dBm(Maximum) | Operating Temperature | 5°C - 40°C |
07 Safety Precautions
Read all instructions and warnings in this guide carefully before using the product to ensure proper and safe use of the product and to avoid personal injury or damage to property.
Warnings
⚠️ Do not disassemble the product yourself. No returns or exchanges will be authorized for disassembled products.
⚠️ Do not use corrosive chemical products or cleaners to wipe down the product.
⚠️ Do not use the product in the vicinity of flammable substances such as in gas stations, fuel depots, etc.
Safety Guidelines
- Keep the product and accessories in a safe place that is inaccessible to children, or only allow use under the supervision of a guardian.
- Immediately disconnect the product from the power source if the product enters water.
- Immediately disconnect the product if the device malfunctions.
- If you use a power adapter to charge (or power) the device, you must purchase an adapter that is safe, compliant, and meets the standards.
- Do not disassemble the product to replace the battery yourself. Incorrectly replacing the battery can result in an explosion.
- The battery contains special protective circuitry and devices. Do not disassemble the battery as this may cause short circuits or electrolyte leakage. If electrolytes accidentally enter your eye, rinse immediately with clean water and seek medical advice.
- Do not expose the appliance or power adapter to high-temperature or high-humidity environments, or put in water, to prevent short circuits that can cause the battery to become hot, smoke, deform, get damaged or even explode.
- Disconnect the power adapter immediately if you notice either smoke or a smell coming from the product or the power adapter, taking care to avoid burns.
Important
Please purchase the version of the product that matches your region or country of use through the NIIMBOT official store or a NIIMBOT authorized sales agent. Purchasing the product through other channels may mean you buy a pirated product or a product not adapted to your region or country of use which may lead to usage issues. In such cases, NIIMBOT may be unable to provide you with further assistance.
Notice: If the device cannot be turned on, please charge for one hour.
Manufacturer: Wuhan Jingchen Intelligent Identification Technology Co., Ltd.
Support Email: service@niimbot.com
Official Website: www.niimbot.com
Manufacturer's Address: No. 5, Creative Workshop, Creative World, Yezhihu West Road, Hongshan District, Wuhan, China.
© 2024 NIIMBOT. All Rights Reserved. NIIMBOT is a brand under Wuhan Jingchen Intelligent Identification Technology Ltd.
