NIIMBOT D11 Quick Start Guide

Product Information

Manufacturer: Wuhan Jingchen Intelligent Identification Technology Co., Ltd.

Support Email: service@niimbot.com

Official Website: www.niimbot.net

Office Address: Creative Workshop No. 5, Creative World, Yezhihu West Road, Hondshan District, Wuhan, China

Production Address: No. 1 Tianyang Road, Chuanlong Avenue, Hengdian Street, Huangpi District, Wuhan, China

© 2022 NIIMBOT. All rights reserved. NIIMBOT is a brand under Wuhan Jingchen Intelligent Identification Technology Ltd.

01 Package Contents

• Smart Label Printer *1

  [Illustration of the NIIMBOT D11 Smart Label Printer, a compact device with a handle loop.]

• Label Paper Roll *1

  [Illustration of a label paper roll.]

• Micro USB Cable *1

  [Illustration of a Micro USB cable.]

• Quick Start Guide *1

  [Illustration of the Quick Start Guide booklet.]

02 Installation

1. Slide left to open the lid.

   [Diagram showing the lid of the label printer being slid open.]

2. Fit the print paper into the compartment with the print side facing down, and the first label paper sticking out of the tear-off opening.

   [Diagram illustrating how to insert the label paper roll into the printer compartment, with the print side facing down and the first label edge protruding.]

   Danger! Beware of the sharp blade when the paper compartment is open.

3. Slide right to close the paper compartment.

   [Diagram showing the lid of the label printer being slid closed.]

4. Hold down the Power button for three seconds to switch on the printer.

   [Illustration of the label printer showing the location of the Indicator Light and the Power Button.]

03 Installing App

1. Before using the printer, please install the NIIMBOT app from Google Play or the App Store.

   NIIMBOT Design & Print APP: easy to download and use.

   [App Store download badge] [Google Play download badge]

   More information available on the NIIMBOT app: Sign in to NIIMBOT > Me > Help Center > Hardware

2. Get the NIIM app for more label designs for homes.

   NIIM Design & Print APP: easy to download and use.

   [App Store download badge] [Google Play download badge]

04 Connecting and Printing

1. Open NIIMBOT app and turn on Bluetooth on your phone.

   [Illustration of a smartphone displaying the NIIMBOT app interface, with a Bluetooth icon and the text 'Turn on Bluetooth'.]

2. On Home, tap Connect smart label printer. Then select device model.

   Notice: If a PIN code is required, input 0000 or 1234.

3. After connecting, tap on "Current label template" on the Home tab to enter the label editor.

Special Notes: Images of products, accessories, and the app in this manual are for illustrative purposes only and may be different from actual products. Products are subject to change without prior notice.

05 Basic Functions

06 LED Indicators

07 Specifications

08 Safety Precautions

Please read all the instructions and warnings in this manual carefully before using this product to ensure the proper functioning of the device and your safety.

Warnings

1. Please keep the product and accessories out of the reach of children or they must be used under the supervision and guidance of a guardian;
2. Turn off the power immediately when water gets into the product;
3. Turn off the power immediately in case of any product malfunction;
4. If you want to use a power adapter, always use one that is safe, regulatory-compliant, and compatible;
5. Do not disassemble the product to replace the battery. Improper operation may cause an explosion;
6. The battery contains special protection circuit and device, please do not disassemble the battery without authorization, otherwise it may cause a short circuit or leakage. If electrolyte gets into your eyes, flush with water immediately and seek medical help;
7. Do not expose the product and the power adapter to high temperature or high humidity. Do not put them in water, otherwise a short circuit may occur and the battery may heat up, smoke, deform, damage, or even explode;
8. If smoke or smell comes from the product or the power adapter, please unplug the power adapter immediately and avoid any burns.

09 Related Statements

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Declaration of conformity

Hereby, Wuhan Jingchen Intelligent Identification Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU. This product can be used across EU member states. This device can be used in European Union.

Hereby, [Wuhan Jingchen Intelligent Identification Technology Co., Ltd.] declares that the radio equipment type [NIIMBOT D11] is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: http://www.niimbot.com.

Canadian Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

1. L' appareil ne doit pas produire de brouillage;
2. L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.