Manuals+

MEAN WELL RS-15 Series 15W Single Output Switching Power Supply

Features

  • Universal AC input / Full range
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection
  • LED indicator for power on
  • 100% full load burn-in test
  • No load power consumption < 0.5W
  • All using 105°C long life electrolytic capacitors
  • Withstand 300VAC surge input for 5 seconds
  • High operating temperature up to 70°C
  • Withstand 5G vibration test
  • High efficiency, long life and high reliability

Specifications

General

Parameter Value
Input Voltage Range 85~264VAC / 120~370VDC
Frequency Range 47~63Hz
Efficiency (Typ.) 72% (RS-15-3.3) to 82% (RS-15-48)
AC Current (Typ.) 0.35A/115VAC, 0.25A/230VAC
Inrush Current (Typ.) Cold Start 65A / 230VAC
Leakage Current < 2mA / 240VAC

Output Models

Model DC Voltage Rated Current Current Range Rated Power Ripple & Noise (max.) Note.2 Voltage Adj. Range Voltage Tolerance Note.3 Line Regulation Note.4 Load Regulation Note.5 Setup, Rise Time Hold Up Time (Typ.)
RS-15-3.3 3.3V 3A 0~3A 9.9W 80mVp-p 2.9~3.6V ±3.0% ±0.5% ±2.0% 1000ms, 30ms/230VAC 70ms/230VAC
RS-15-5 5V 3A 0~3A 15W 80mVp-p 4.75~5.5V ±2.0% ±0.5% ±1.5% 1000ms, 30ms/115VAC at full load 12ms/115VAC at full load
RS-15-12 12V 1.3A 0~1.3A 15.6W 120mVp-p 10.8~13.2V ±1.0% ±0.5% ±0.5% 1000ms, 30ms/230VAC 70ms/230VAC
RS-15-15 15V 1A 0~1A 15W 120mVp-p 13.5~16.5V ±1.0% ±0.5% ±0.5% 1000ms, 30ms/115VAC at full load 12ms/115VAC at full load
RS-15-24 24V 0.625A 0~0.625A 15W 200mVp-p 22~27.6V ±1.0% ±0.5% ±0.5% 1000ms, 30ms/230VAC 70ms/230VAC
RS-15-48 48V 0.313A 0~0.313A 15.024W 200mVp-p 43.2~52.8V ±1.0% ±0.5% ±0.5% 1000ms, 30ms/115VAC at full load 12ms/115VAC at full load

Notes on Specifications

  1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor.
  3. Tolerance: includes set up tolerance, line regulation and load regulation.
  4. Line regulation is measured from low line to high line at rated load.
  5. Load regulation is measured from 0% to 100% rated load.
  6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." [EMI Testing Guide]
  7. The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).

Protections

Overload

Protection type: Hiccup mode, recovers automatically after fault condition is removed.

Over Voltage

Protection type: Shut off o/p voltage, clamping by zener diode.

Over Temperature

Shut down o/p voltage, recovers automatically after temperature goes down.

Environmental Specifications

Parameter Value
Working Temp. -20~+70°C (Refer to "Derating Curve")
Working Humidity 20~90% RH non-condensing
Storage Temp., Humidity -40~+85°C, 10 ~ 95% RH
Temp. Coefficient ±0.03%/°C (0~50°C)
Vibration 10~500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC

Safety Standards

UL62368-1, TUV BS EN/EN62368-1, AS/NZS 62368.1, EAC TP TC 004, CCC GB4943.1, BSMI CNS14336-1, BIS IS13252(Part1):2010/IEC 60950-1: 2005 approved.

Withstand Voltage

I/P-O/P: 3KVAC, I/P-FG: 2KVAC, O/P-FG: 0.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH

EMC Emission

Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, GB9254 class B, GB17625.1, EAC TP TC 020, CNS13438 Class B.

EMC Immunity

Compliance to BS EN/EN61000-4-2, 3, 4, 5, 6, 8,11, BS EN/EN55035, BS EN/EN61000-6-1, light industry level, EAC TP TC 020.

Other Specifications

MTBF

4914.9K hrs min. (Telcordia SR-332 / Bellcore); 1608.9K hrs min. (MIL-HDBK-217F @ 25°C)

Dimensions

62.5*51*28mm (L*W*H)

Packing

0.13Kg; 108pcs/15Kg/0.8CUFT

Diagrams and Curves

Mechanical Specification

The mechanical drawing shows the physical dimensions of the power supply unit. Overall dimensions are 62.5mm (Length) x 51mm (Width) x 28mm (Height). Mounting holes are M3 size, with specific locations indicated in the diagram. The terminal pin assignments are as follows:

Pin No. Assignment
1 AC/L
2 AC/N
3 FG
4 DC OUTPUT -V
5 DC OUTPUT +V

Block Diagram

The block diagram illustrates the internal signal flow. Input power (I/P) is first processed by an EMI Filter, followed by Rectifiers & Filter. The core of the unit is the Power Switching stage, managed by a PWM Control circuit. The output stage consists of Rectifiers & Filter and a Detection Circuit. The output voltage can be fine-tuned using the +V ADJ. control. The Frame Ground (FG) connection provides safety grounding.

Derating Curve

This graph illustrates the power supply's load capacity relative to ambient temperature. The unit can operate at 100% load from -20°C up to approximately 50°C. Beyond 50°C, the maximum allowable load decreases linearly, reaching 0% at 70°C ambient temperature. This indicates the need for thermal management in higher ambient temperatures.

Output Derating VS Input Voltage

This graph shows the relationship between the input voltage and the output load percentage. The RS-15 series power supply is designed to operate at 100% load across a wide input voltage range, specifically from 95VAC to 264VAC at 60Hz. This ensures stable operation under varying input power conditions.

Models: RS-15 Series 15W Single Output Switching Power Supply, RS-15 Series, 15W Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply, Supply

File Info : application/pdf, 2 Pages, 121.28KB

PDF preview unavailable. Download the PDF instead.

rs-15-spec

References

Acrobat Distiller 9.0.0 (Windows); modified using iText 5.5.6 ©2000-2015 iText Group NV (AGPL-version) (AGPL-version) (AGPL-version)

Related Documents

Preview MEAN WELL RS-100 Series 100W Single Output Switching Power Supply Datasheet
Detailed specifications, features, and technical information for the MEAN WELL RS-100 series of 100W single output switching power supplies, including electrical and environmental characteristics, mechanical dimensions, and safety compliance.
Preview MEAN WELL RS-25 Series 25W Single Output Switching Power Supply Technical Specification
Detailed technical specifications, features, and mechanical data for the MEAN WELL RS-25 series of 25W single output switching power supplies, including models RS-25-3.3, RS-25-5, RS-25-12, RS-25-15, RS-25-24, and RS-25-48.
Preview MEAN WELL HDR-15 Series 15W Ultra Slim DIN Rail Power Supply
Technical specifications, features, applications, and mechanical details for the MEAN WELL HDR-15 series 15W ultra-slim DIN rail power supply. This AC-DC converter is designed for household and industrial automation, offering universal input, high efficiency, and comprehensive protection features.
Preview MEAN WELL IRM-15 Series: 15W AC-DC PCB-Mount Green Power Module Specifications
Detailed specifications for the MEAN WELL IRM-15 series, a 15W AC-DC PCB-mount green power module with universal input, low no-load power consumption, and compliance with Class B EMI standards. Features include compact size, wide operating temperature, and various protections.
Preview MEAN WELL IRM-15 Series: 15W AC-DC PCB-Mount Green Power Module Datasheet
Technical datasheet for the MEAN WELL IRM-15 series, a 15W AC-DC PCB-Mount Green Power Module. Features universal input, low no-load power consumption, EMI Class B compliance, and wide operating temperature range. Ideal for industrial electrical equipment, factory automation, and more.
Preview MEAN WELL EPS-65S Series: 65W Single Output Switching Power Supply Datasheet
Detailed specifications and features for the MEAN WELL EPS-65S series of 65W single output switching power supplies, including technical data, applications, and mechanical information.
Preview MEAN WELL RSP-500 Series 500W Single Output PFC Power Supply Datasheet
Detailed technical specifications, features, applications, and mechanical information for the MEAN WELL RSP-500 series of 500W single output AC/DC power supplies with Active PFC.
Preview MEAN WELL RSP-1500 Series: 1500W Single Output AC/DC Power Supply Datasheet
Comprehensive datasheet for the MEAN WELL RSP-1500 series 1500W single output AC/DC power supply. Details include electrical specifications, features, applications, block diagram, mechanical dimensions, and connection pin assignments for industrial use.