JTD-3222 14-in-1 USB-C Docking Station User Manual

Introduction

Welcome to the user manual for the JTD-3222 14-in-1 USB-C Docking Station. This guide provides essential information to help you set up and utilize the full capabilities of your new docking station, designed to expand your connectivity options and enhance productivity.

Key Features

• Expanded Connectivity: Offers 14 ports for comprehensive device integration.
• Triple Display Support: Supports up to three external displays simultaneously, with resolutions up to 4K @ 60Hz for HDMI 1 and 2, and 4K @ 30Hz for DisplayPort.
• High-Speed Data Transfer: Includes USB 3.2 Gen 2 ports for rapid data syncing.
• Gigabit Ethernet: Provides a stable wired network connection.
• Power Delivery: Supports up to 100W USB-C Power Delivery for charging your host device.
• Audio and SD Card Support: Features audio input/output and SD/TF card readers.

Package Contents

Your JTD-3222 package should contain:

• 1 x JTD-3222 14-in-1 USB-C Docking Station
• 1 x USB-C to USB-C Cable
• 1 x User Manual (this document)

System Requirements

To use the JTD-3222 docking station, your host device must meet the following requirements:

• A USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support.
• A USB-C port with USB Power Delivery (PD) support for charging functionality.
• Operating System: Windows 10/8.1/7, macOS 10.10 or later, Chrome OS, Linux.

Connections and Ports

The JTD-3222 features a variety of ports for versatile connectivity:

Host Connection:

1 x USB-C (Thunderbolt 3/4 or USB 3.1/3.2 Gen 1/Gen 2 compatible, supports DP Alt Mode and PD)

Video Output:

2 x HDMI ports (HDMI 1: up to 4K@60Hz, HDMI 2: up to 4K@60Hz)

1 x DisplayPort (DP: up to 4K@30Hz)

Note: For triple display, the combined resolution and refresh rate may be limited by the host device's capabilities.

USB Ports:

1 x USB-C 3.2 Gen 2 port (up to 10Gbps data transfer, 5V/3A power output)

1 x USB-C PD port (input for charging host, up to 100W)

2 x USB-A 3.2 Gen 1 ports (up to 5Gbps data transfer, 5V/0.9A power output)

2 x USB-A 2.0 ports (up to 480Mbps data transfer, 5V/0.5A power output)

Network:

1 x Gigabit Ethernet port (RJ45, 10/100/1000Mbps)

Audio:

1 x 3.5mm Audio/Microphone Combo Jack

Card Readers:

1 x SD Card Slot (supports UHS-I, up to 104MB/s)

1 x microSD Card Slot (supports UHS-I, up to 104MB/s)

Operation and Usage

Follow these steps to connect and use your docking station:

1. Connect the included USB-C cable from your host device (laptop, tablet) to the host USB-C port on the docking station.
2. Connect your external monitors to the HDMI or DisplayPort outputs on the docking station.
3. Connect your peripherals (keyboard, mouse, external drives, etc.) to the available USB-A or USB-C ports.
4. Connect an Ethernet cable to the RJ45 port for wired network access.
5. Plug your USB-C power adapter into the PD input port on the docking station to charge your host device (ensure the adapter supports at least 65W for optimal performance).
6. Connect headphones or a microphone to the 3.5mm audio jack.
7. Insert SD or microSD cards into their respective slots.

Your operating system should automatically detect the docking station and connected devices. You may need to configure display settings in your system's display preferences to enable extended or mirrored modes.

Troubleshooting

If you encounter issues, try the following:

• No Video Output: Ensure the USB-C cable is securely connected to both the host device and the dock. Verify that the host device supports DP Alt Mode. Try a different HDMI/DP cable or monitor. Check display settings in your OS.
• No Network Connection: Ensure the Ethernet cable is properly plugged in. Check the network adapter settings in your OS. Try restarting the dock and your host device.
• Slow Data Transfer: Use USB 3.0/3.1/3.2 compatible devices and cables. Ensure the device is connected to a USB 3.x port on the dock.
• Device Not Charging: Confirm that your USB-C power adapter is connected to the PD port and supports sufficient wattage (e.g., 65W or higher). Ensure your host device supports USB-C PD charging.
• Audio Issues: Check that the audio jack is correctly connected. Verify audio output/input settings in your OS.

Specifications

Safety Information

Please read the following safety precautions before using the JTD-3222 docking station:

• Do not expose the device to water or moisture.
• Avoid placing the device in extreme temperatures or direct sunlight.
• Ensure proper ventilation around the device.
• Use only the provided USB-C cable and a compatible power adapter.
• Do not attempt to disassemble or repair the device yourself.
• Keep out of reach of children.