ALLPOWERS SOLAX P100 Portable Power Station User Manual
Safety Precautions
- Use the product in a dry, well-ventilated place. If exposed to moisture, dry it thoroughly before use.
- Close supervision is required when the product is used near children to reduce the risk of injury.
- Do not insert fingers into the product to avoid electric shock or other hazards.
- Do not expose the product to rain or snow.
- Do not use the product in environments with strong static electricity or strong magnetic fields.
- Use cables designed for this product. ALLPOWERS is not responsible for damage caused by third-party equipment.
- Do not disassemble the product. If service or repair is needed, find a qualified technician.
- Improper use, drops, or excessive force can damage the product.
- When disposing of used batteries, separate batteries with different electrochemical systems.
- In case of fire, use a powder extinguisher or immerse the product in water.
- Do not place the product near fire or heat sources.
Product Specifications
| Feature | Specification |
|---|---|
| Product Name | ALLPOWERS SOLAX P100 |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Battery Capacity | 6.2Ah/16V, 99.2Wh (31000mAh 3.2V) |
| Protection Types | High temperature, low temperature, over-discharge, over-charge, overload, short circuit, overcurrent. |
| Operating Temperature | Charging: 0°C ~ 40°C (32°F ~ 104°F) Discharging: -10°C ~ 40°C (14°F ~ 104°F) |
| Weight | Approx. 2.09 lbs / 950g |
| Dimensions | 12.8 x 9 x 8.8 cm (5.04 x 3.54 x 3.46 inches) |
| Cycle Life | 2000 cycles, >80% capacity |
| Certifications | CE, FC, IC, ROHS, UN38.3 |
| Input Ports | USB-C1/C2 (PD Input): 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (Max 100W) USB-C1/C2 (Car Input): 11-17.5V (Max 60W per port) USB-C1/C2 (Solar Panel Input): 18-27.2V (Max 100W) |
| Output Ports | USB-A: 18W MAX (5V/3A, 9V/2A, 12V/1.5A) USB-C1/C2: 100W MAX (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A) |
| Total Simultaneous Output | USB-C1+C2+USB-A: Max 128W USB-C1+C2: Max 110W USB-C1/C2 + USB-A: Max 118W |
How to Use
Appearance Overview
The ALLPOWERS SOLAX P100 features multiple output ports including USB-C1, USB-C2, and USB-A ports, along with an LCD display and control buttons.
Display Icon Overview
Battery Level Indicator
The battery icon rotates clockwise when the product is charging. When discharging, it displays the current power level. A low power icon appears when the battery capacity is below 20% and blinks when below 5%. The low power icon is not displayed during charging.
Low Temperature Warning
If this icon appears, do not worry. The battery will recover naturally as it cools down.
High Temperature Warning
If this icon appears, do not worry. It will recover automatically when the ambient temperature returns to normal.
Error Codes
Error codes (E1: Short Circuit Protection, E2: Overcurrent Protection, E3: Overvoltage Protection) are set to quickly resolve system faults. If an error code is displayed, remove the load or unplug the charger. The product will recover automatically. If the issue persists, contact after-sales service.
Basic Operation
Display On/Off
After the display lights up, double-click the DISPLAY button to enter constant on mode. The screen will automatically turn off after 2 hours. If no operation is performed for 30 seconds, the product enters standby mode and the display automatically turns off.
Constant On Mode
Double-click the DISPLAY button when the screen is lit. The screen enters constant on mode. Press again to turn the screen off. The screen will automatically turn off after 2 hours if no charging or load connection is made.
Energy Saving Mode
Energy saving mode is off by default. When enabled, if the product is not connected to a device, or if the connected device's power is 2W or less, the output will automatically turn off after 12 hours.
To enable: Long-press the DISPLAY button until the energy saving mode icon appears on the screen. You can continuously charge low-power devices with energy saving mode on.
To disable: Long-press the DISPLAY button until the energy saving mode icon disappears.
Charging Methods
AC Charging
Use the USB-C charging cable included with the product. ALLPOWERS is not responsible for any damage caused by using other unofficial charging cables.
If the power drops below 5%, please charge within 24 hours to avoid the product's low voltage state.
Solar Panel Charging
This product can be charged using solar panels with an output of 18V~27.2V and a maximum output of 100W. A diagram illustrates solar panel charging, showing a connection from a solar panel to the ALLPOWERS SOLAX P100 unit via a USB-C to XT60 cable. For specific solar panel models, please contact customer service.
Car Charging
This product is suitable for charging via a 12V car charging port. Use car charging after ignition starts to avoid draining the car battery and preventing the car from starting. Ensure good contact between the car charging port and the cigarette lighter plug. Do not use car charging on bumpy roads as it may cause poor contact and burn the connector. ALLPOWERS is not responsible for any damage caused by operating outside of specifications.
Charging Safety Precautions
Vehicle Charging
Vehicle charging only supports 12V models, not 24V models. Do not use 24V car models to charge this product to avoid personal injury and property damage.
Accessory Usage
Do not use accessories other than the ALLPOWERS brand for charging. It is recommended to use ALLPOWERS brand solar panels for charging. ALLPOWERS is not responsible for damage caused by charging with other brands of solar panels.
Package Contents
- ALLPOWERS SOLAX P100 Portable Power Station
- USB-C Cable
- USB-C to XT60 Cable (Optional purchase)
- Instruction Manual
Disclaimer
Before using this product, please read this instruction manual carefully and ensure you understand it fully before using it correctly. Improper use of this product may cause serious injury to yourself or others, or lead to product damage and property loss. By using this product, you are deemed to have understood, acknowledged, and agreed to all the terms and contents of this document. You promise to be responsible for your own actions and all consequences arising from them. ALLPOWERS is not responsible for any losses caused by your failure to use the product in accordance with the "Instruction Manual".
Subject to compliance with laws and regulations, ALLPOWERS reserves the final right of interpretation for this document and all related documents concerning this product. For updates, revisions, or termination without notice, please check the latest product information on the official ALLPOWERS website.
This product is not suitable for equipment that requires extremely high reliability and safety, such as aerospace equipment, critical communication equipment, nuclear control equipment, or medical equipment. Please confirm suitability before use. If this product is used for the above equipment and product failure, personal injury, fire, or equipment malfunction occurs, ALLPOWERS shall not be held liable.
Contact Us
For questions about the product or service, or if you need support, please email us at support@allpowers.com.
Official Website: www.allpowers.jp
