ALLPOWERS R1500 Portable Power Station

1. Safety Instructions

Please read and follow all safety instructions carefully to prevent electric shock, fire, or injury. Do not expose the product to rain or moisture. Do not insert foreign objects into any ports. Keep away from heat sources. Ensure proper ventilation.

2. Specifications

Input Specifications

Output Specifications

Battery Specifications

General Specifications

Certifications: CE, FCC, RoHS, IC

3. How to Use

Charging the Power Station: Connect the AC adapter to the input port and a wall outlet. The battery level indicator will show the charging status.

Using the Output Ports: Press the 'DC OUTPUT' or 'AC OUTPUT' button to activate the respective ports. Connect your devices to the appropriate ports.

Wireless Charging: Place a Qi-compatible device on the wireless charging pad.

App Usage: Download the ALLPOWERS app to monitor and control the power station remotely. Follow the in-app instructions for pairing.

4. FAQ

Q: How do I know if the product is charging?
A: The battery level indicator on the display will show the charging progress.

Q: The display shows 100% but the device is not fully charged. What should I do?
A: Disconnect the power source, wait a few minutes, and then reconnect to charge again. This may be due to battery calibration.

Q: Can I charge the power station while using it?
A: Yes, the R1500 supports pass-through charging.

5. Troubleshooting

Problem: No power output.
Solution: Ensure the output port is activated by pressing the corresponding button. Check if the battery is depleted.

Problem: Overload protection is triggered.
Solution: Disconnect devices that exceed the power station's output limits. Reduce the load and try again.

Problem: Device not charging via wireless pad.
Solution: Ensure the device is Qi-compatible and placed correctly on the pad. Ensure the power station is powered on.

6. Package Contents

• ALLPOWERS R1500 Portable Power Station
• AC Charging Cable
• User Manual
• Warranty Card

7. Disclaimer

ALLPOWERS is not responsible for any damage or loss resulting from improper use of the product. Please refer to the user manual for detailed instructions and safety precautions.

8. Contact Us

For support and inquiries, please visit the ALLPOWERS website or contact customer service.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum 20cm distance between the radiator and your body. Use only the supplied antenna.

IC Caution

English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To maintain compliance with RSS-102 RF Exposure guidelines, this equipment should be installed and operated with minimum 20cm distance between the radiator and your body. Use only the supplied antenna.

French: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Pour être conforme aux lignes directrices d'exposition RF RSS-102, cet équipement doit être installé et exploité à une distance minimale de 20cm entre le radiateur et votre corps: n'utilisez que l'antenne fournie.