KULLEN 5-Drawer Chest

Important Safety Warnings

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

This warning is provided in multiple languages, including Spanish, Portuguese, Chinese, Korean, Japanese, Indonesian, Malay, Arabic, Thai, and Vietnamese.

Parts and Hardware

The following parts and hardware are included for assembly. Quantities are indicated.

• Main furniture panels (various sizes)
• Drawer components (sides, fronts, backs, bottoms)
• Drawer runners
• Handles (4x)
• Dowels (e.g., 52x 101350)
• Screws (various types and quantities, e.g., 10x 105344, 20x 105344, 4x 105248, 2x 100214, 20x 110519, 2x 109048, 2x 109049)
• Cam locks and bolts (e.g., 12x 119252/119250, 10x 103114)
• Wall mounting brackets and hardware (e.g., 2x 106989, screws, plugs)
• Allen key (1x 100001)
• Other small parts and connectors.

Note: Specific part numbers are referenced in the assembly steps.

Assembly Instructions

Step 1: Prepare Base Panels

Lay out two base panels. Insert 20 dowels (109041) into the pre-drilled holes on one panel. Attach metal strips (149842) using 20 screws (105344). A screwdriver [screwdriver] is required.

Visual Description: Two large flat panels are shown. Dowels are inserted into holes. Metal strips are attached with screws.

Step 2: Attach Side Connectors

Insert 8 cam lock bolts (118331) into the designated holes on the two base panels. A screwdriver [screwdriver] is needed.

Visual Description: Two panels are shown with cam lock bolts being screwed in.

Step 3: Prepare Side Panels

Take six side panels. Insert 18 dowels (101350) into the holes on the edges of these panels. A hammer [hammer] may be used gently.

Visual Description: Six long, narrow panels are shown. Dowels are inserted into the ends of each.

Step 4: Attach First Vertical Panel

Connect one prepared side panel vertically to one of the base panels. The dowels should align with the holes.

Visual Description: A vertical panel is being attached to a horizontal base panel.

Step 5: Attach Remaining Vertical Panels

Attach the remaining vertical side panels to the base panels. Four additional dowels (101350) are used for this connection.

Visual Description: Multiple vertical panels are being attached to the base panels, forming the main frame structure.

Step 6: Attach Horizontal Supports

Insert 14 dowels (101350) into the horizontal support pieces. Attach these supports between the vertical panels.

Visual Description: Horizontal pieces are being inserted between the vertical panels, secured by dowels.

Step 7: Insert Back Panels

Slide the back panels into the grooves provided on the vertical and horizontal panels. Arrows [arrow] indicate the direction of insertion.

Visual Description: Large, thin panels are being slid into place from the top into grooves.

Step 8: Attach Top Panel

With the help of another person [two people], place the top panel onto the assembled frame. Ensure alignment.

Visual Description: Two people are shown carefully lowering the top panel onto the structure.

Step 9: Secure Top Panel

Insert 8 cam locks (119252/119250) into the holes on the inside of the unit and turn them to secure the top panel. A screwdriver [screwdriver] is used. The cam lock mechanism involves inserting the lock and then turning it.

Visual Description: Close-up shows cam locks being inserted and turned with a screwdriver to secure the top panel.

Step 10: Attach Drawer Runners

Attach drawer runners to the inside of the unit using 2 screws (100214/100219) and the Allen key (100001). The runners are secured to the side panels.

Visual Description: Drawer runners are being screwed into the interior sides of the cabinet. An Allen key is shown.

Step 11: Attach Drawer Supports

Attach 4 drawer support brackets (153548/158568) to the underside of the top panel using a hammer [hammer].

Visual Description: Small brackets are being attached to the underside of the top panel with a hammer.

Step 12: Prepare Drawer Sides

Take drawer side panels. Insert dowels (155371) into the designated holes.

Visual Description: Drawer side panels are shown with dowels being inserted.

Step 13: Attach Drawer Fronts

Attach drawer fronts to the drawer side panels using 2 screws (105248) per side. A screwdriver [screwdriver] is needed.

Visual Description: Drawer fronts are being attached to drawer side panels with screws.

Step 14: Prepare Drawer Base Panels

Insert 4 cam lock bolts (118331) into the drawer base panels. A screwdriver [screwdriver] is required.

Visual Description: Drawer base panels are shown with cam lock bolts being screwed in.

Step 15: Attach Drawer Sides to Base

Connect the drawer side panels to the drawer base panels. Use 2 screws (109049/100823) and bracket (106989) for each side. A screwdriver [screwdriver] is used.

Visual Description: Drawer side panels are being attached to the drawer base panels using screws and brackets.

Step 16: Assemble Drawer Boxes

Assemble the drawer boxes by connecting the sides and base. The diagram shows the structure being formed.

Visual Description: The drawer box structure is being assembled.

Step 17: Insert Drawer Backs

Slide the drawer back panels into the grooves of the assembled drawer boxes.

Visual Description: Drawer back panels are being slid into place.

Step 18: Secure Drawer Backs

Insert 4 cam locks (119252/119250) to secure the drawer back panels. A screwdriver [screwdriver] is used.

Visual Description: Cam locks are being used to secure the drawer back panels.

Step 19: Attach Drawer Handles

Attach the drawer handles (152123) to the drawer fronts using 2 screws (105344) per handle. A screwdriver [screwdriver] is required.

Visual Description: Drawer handles are being screwed onto the front of the drawers.

Step 20: Wall Mounting Preparation

This section details how to secure the furniture to the wall using the provided anti-tip hardware. It shows different wall types: Solid Wall (A), Hollow Wall (B), and Solid Wood (C). It specifies drill bit sizes (Ø 8 mm for A/B, Ø 3 mm for C) and screw/plug usage. For solid walls (A), use Ø 8 mm drill bit, drill to 70 mm depth, insert plug, and secure bracket. For hollow walls (B), use Ø 8 mm drill bit, drill to approx. 30 mm depth, insert plug, and secure bracket. For solid wood (C), use Ø 3 mm drill bit, drill to approx. 30 mm depth, use screw without plug to secure bracket.

Visual Description: Diagrams illustrate drilling into different wall types and inserting screws/plugs.

Step 21: Attach Wall Brackets to Furniture

Attach the wall mounting brackets (106989) to the back of the furniture using 2 screws (109048) and 2 screws (100823). A screwdriver [screwdriver] is used.

Visual Description: Brackets are being screwed onto the back of the assembled furniture unit.

Step 22: Assemble Drawer Bases (Part 1)

Prepare two sets of drawer base components. Insert 2 dowels (101350) into each of two base pieces.

Visual Description: Drawer base parts are shown with dowels being inserted.

Step 23: Assemble Drawer Bases (Part 2)

Prepare three sets of drawer base components. Insert 2 dowels (101350) into each of two base pieces.

Visual Description: Drawer base parts are shown with dowels being inserted.

Step 24: Assemble Drawer Sides (Part 1)

Attach two vertical drawer side panels to a prepared drawer base panel. Use 2 cam lock bolts (118331) for each side. A screwdriver [screwdriver] is required.

Visual Description: Two vertical drawer sides are attached to a base panel using cam lock bolts.

Step 25: Assemble Drawer Sides (Part 2)

Attach two vertical drawer side panels to a prepared drawer base panel. Use 2 cam lock bolts (118331) for each side. A screwdriver [screwdriver] is required.

Visual Description: Two vertical drawer sides are attached to a base panel using cam lock bolts.

Step 26: Insert Drawer Backs (Part 1)

Slide the drawer back panels into the grooves of the assembled drawer sides and base.

Visual Description: Drawer back panels are being slid into place.

Step 27: Insert Drawer Backs (Part 2)

Slide the drawer back panels into the grooves of the assembled drawer sides and base.

Visual Description: Drawer back panels are being slid into place.

Step 28: Secure Drawer Boxes

Secure the drawer boxes by inserting 4 cam locks (110519) into the designated holes and turning them with a screwdriver [screwdriver]. A hammer [hammer] may be used to tap the cam locks into place.

Visual Description: Cam locks are being inserted and turned to secure the drawer boxes. A hammer is shown.

Step 29: Attach Drawer Runners to Drawer Box

Attach the drawer runners (152123) to the sides of the drawer boxes using 1 screw (105344) and 1 connector (109041) per runner. A screwdriver [screwdriver] is used.

Visual Description: Drawer runners are being attached to the sides of the drawer boxes.

Step 30: Attach Drawer Runners to Drawer Box (Continued)

Attach the drawer runners (152123) to the sides of the drawer boxes using 1 screw (105344) and 1 connector (109041) per runner. A screwdriver [screwdriver] is used.

Visual Description: Drawer runners are being attached to the sides of the drawer boxes.

Step 31: Insert Drawers into Cabinet

Insert the assembled drawers into the cabinet. The diagram shows different drawer types (1x, 1x, 3x) being inserted. A warning icon [warning] with a person falling is shown, emphasizing the need for wall anchoring.

Visual Description: Drawers are being slid into the cabinet on their runners. A warning symbol indicates the importance of wall anchoring.

Step 32: Secure Drawer Fronts

Secure the drawer fronts to the drawer box structure using 2 cam locks (102323) per drawer. A screwdriver [screwdriver] is used. The diagram shows the cam lock mechanism.

Visual Description: Close-up shows cam locks being inserted and turned to secure the drawer fronts.

Step 33: Final Drawer Check

Ensure all drawers are properly seated and slide smoothly.

Visual Description: A drawer is shown partially pulled out, indicating a final check.

Step 34: Final Securing of Drawer Fronts

Final check and tightening of drawer front screws/connectors. Ensure the drawer front is aligned correctly. A warning icon [warning] with a crossed-out hand [crossed-out hand] and a diagram showing correct screw insertion is present.

Visual Description: Close-up shows the final tightening of drawer front connectors. A warning symbol indicates caution.

Step 35: Final Placement

Push the drawer fully into the cabinet. The arrow [arrow] indicates the direction.

Visual Description: A drawer is being pushed fully into the cabinet.

Wall Anchoring Instructions

It is crucial to anchor this furniture to the wall using the provided tip-over restraints to prevent serious injury or death from furniture tip-over. Follow the instructions in Step 20 and Step 21 carefully.

Wall Types:

• Solid Wall (A): Use Ø 8 mm drill bit [drill bit], drill to 70 mm depth, insert plug [plug], and secure bracket [wall bracket].
• Hollow Wall (B): Use Ø 8 mm drill bit [drill bit], drill to approx. 30 mm depth, insert plug [plug], and secure bracket [wall bracket].
• Solid Wood (C): Use Ø 3 mm drill bit [drill bit], drill to approx. 30 mm depth, use screw [screw] without plug [plug] to secure bracket [wall bracket].

Note: If you are uncertain about your wall type or the correct mounting procedure, seek professional advice.