PICOBLU-V2 Mixer Amplifier
For Retail & Hospitality
PICOBLU-V2 Mixer Amplifier Overview
The PICOBLU-V2 is a versatile mixer amplifier designed for retail and hospitality environments, offering robust audio distribution capabilities.
Front Panel Description: The front panel features controls for Bass, Treble, and volume, along with input selection, Signal, Power, and Mute status indicators, and an On/Off power switch. A 3.5mm jack input is also present on the front.
Rear Panel Description: The rear panel includes the AC power input (230V-50-60Hz, 29W) with a fuse holder (T1.0AL 250V), speaker output terminals for low impedance (4Ω) and high impedance (100V) systems, and line outputs. Input connectors include an XLR for microphone (Input 1), RCA connectors for CH2 and CH3 inputs, and a USB-C port for programmable Bluetooth configuration.
Connectivity: It offers programmable Bluetooth 5.1 connectivity, allowing for custom naming, PIN, and security settings, accessible via a USB-C connection. Audio can also be input via a 3.5mm jack (CH2), which shares functionality with the rear CH2 RCA input. The rear CH3 RCA input is also available.
AMX526 Paging Microphone
The AMX526 is a paging microphone designed to connect to Input 1 of the PICOBLU-V2 mixer amplifier. It features a gooseneck design for flexible positioning and includes a mute function.
Extra Features on the PICOBLUV2 Mixer Amplifiers
- Line output for connection to an additional power amplifier.
- Contact closure that gives priority to the mic 1 input, muting other audio sources.
- Two other line-level inputs for additional background sources.
Speaker Configurations
Low Impedance Outputs (4Ω)
Connect up to two FLEX15 or FLEX30 speakers directly to the 4Ω output.
Alternatively, connect up to four QF20CS speakers to the 4Ω output. For these speakers, use the loop-thru connectors on the speaker and adjust the front dial to the 16Ω setting.
High Impedance Outputs (100V)
For wall-mount speakers, connect up to six FLEX15 or FLEX30 speakers tapped at 3.75W each to the 100V output.
Alternatively, connect up to fourteen FLEX15 speakers tapped at 1.87W each to the 100V output.
For ceiling-mount speakers, connect up to six QFC6CS speakers tapped at 3.75W each to the 100V output.
Alternatively, connect up to ten QFC6CS speakers tapped at 2.5W each to the 100V output.
