Australian Monitor FLEX Series Installation and Operation Manual

Important Safety Information

Please read and follow all safety instructions carefully:

• Read and keep these instructions.
• Heed all warnings and follow all instructions.
• Do not use the apparatus near water (e.g., pools, beaches, lakes).
• Clean only with a dry cloth.
• Do not block ventilation openings; install according to manufacturer's instructions.
• Avoid installation near heat sources like radiators, heat registers, stoves, or other heat-producing apparatus (including amplifiers).
• Use only manufacturer-specified attachments/accessories.
• Use only with specified carts, stands, tripods, brackets, or tables. Exercise caution when moving combined apparatus/cart units to prevent tip-over injuries.
• Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged (e.g., power cord/plug, spilled liquid, dropped objects, exposure to rain/moisture, abnormal operation).
• The appliance must not be exposed to dripping or splashing water, and no liquid-filled objects (like vases) should be placed on it.

Introduction

The FLEX series of wall mount speakers offers high-quality audio reproduction and outstanding sonic performance, combined with a contemporary and stylish design. Featuring aluminum grilles and an IP65 rating, these speakers are suitable for both indoor and outdoor use.

The FLEX series is ideal for speech or background music applications. Models are available in 15, 30, and 50 Watt variants, in black or white, and are supplied with pan and tilt wall brackets. Australian Monitor's FLEX series provides exceptional versatility, performance, and value.

Front Panel

The front panel of the FLEX series speakers includes the following components:

• 1. Hi Frequency Driver: A 1-inch tweeter is used across all FLEX models (FLEX15, FLEX30, FLEX50).
• 2. Low Frequency Driver: The woofer sizes vary by model: FLEX15 features a 4-inch woofer, FLEX30 uses a 5 1/4-inch woofer, and FLEX50 is equipped with a 6 1/2-inch woofer.
• 3. Grille: An aluminum powder-coated grille is a standard feature on all FLEX models.

Rear Panel

The rear panel of the FLEX series speakers features:

• 1. Voltage Tap Select Switch: This switch allows selection of the desired 100V transformer tap or an 8 Ohm low impedance transformer bypass option using a screwdriver.
• 2. Speaker Input: Spring post terminals, color-coded for polarity (red for positive '+', black for negative '-'), are used for speaker connection. Ensure multiple speakers are wired with the same polarity.
• 3. Mounting Point: The included pan and tilt wall mount brackets attach to these points.

Mounting

WARNING: When mounting FLEX speakers, consider the following safety issues:

• Permanent speaker installation can be dangerous if not performed by a qualified professional with relevant experience.
• Walls and mounting surfaces must be capable of securely supporting the speaker and bracketry.
• All fixings must be securely attached to the speaker cabinet and mounting surface, following manufacturer's instructions and specifications.

Wall Mount Brackets:

The FLEX speakers are supplied with wall mount brackets. The FLEX15, FLEX30, and FLEX50 models utilize a U-bracket speaker mount that attaches to a separate wall mounting plate.

Installation Steps:

1. Secure the wall mounting plate to a wall or ceiling using suitable fasteners.
2. Fasten the U-bracket to the wall mounting plate using the provided screws.
3. Install the speaker onto the U-bracket using the provided plastic screw fasteners.

Diagram Description: The diagram shows a wall mounting plate, a U-bracket, and plastic screw fasteners, illustrating the assembly for mounting the speaker.

Specifications

Detailed specifications for the FLEX Series speakers:

Contact Information

Australian Monitor is engineered by Australian Monitor.

Address: 1 Clyde St, Silverwater NSW 2128 Australia.

Website: www.australianmonitor.com.au

International enquiries email: international@australianmonitor.com.au

ABN: 35 007 573 417