Hama Bluetooth® Hands-Free Car Kit with AUX-In

Introduction

Thank you for choosing a Hama product. Please take your time to read the following instructions and information completely. Keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Controls and Displays

Diagram showing the components of the Hama Bluetooth hands-free car kit:

• 1. 12V USB car charger: The device that plugs into the car's cigarette lighter socket to provide power.
• 2. Multi-function key: Used for call pick-up/termination and Play/Pause functions.
• 3. Microphone: Integrated microphone for clear voice transmission.
• 4. Button for bass enhancement: Press and hold to activate bass boost.
• 5. 3.5mm Plug: Connects to the car's AUX input socket.
• 6. USB Plug: Connects to the USB car charger for power supply.
• 7. Button for next track / louder: Press briefly to skip to the next track, press and hold to increase volume.
• 8. Button for previous track / quieter: Press briefly to go to the previous track, press and hold to decrease volume.
• 9. Status LED: Indicates the operational status (e.g., pairing, connected).

Explanation of Warning Symbols and Notes

Risk of Electric Shock

⚠️ This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.

Warning

⚠️ This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

ℹ️ This symbol is used to indicate additional information or important notes.

Package Contents

• Bluetooth® hands-free facility
• 12V USB car charger
• 1 self-adhesive hook and loop strip
• These operating instructions

Safety Instructions

General Safety

• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture, and overheating; use only in dry environments.
• Do not use the product near heaters, other heat sources, or in direct sunlight.
• Do not allow the product to distract you while driving. Always pay attention to traffic and your surroundings.
• Do not drop the product or expose it to major shocks.
• Do not operate the product outside the specified power limits.
• Dispose of packaging material according to local regulations.
• Do not modify the device; this voids the warranty.
• Use the product only for its intended purpose.
• Use the article under moderate climatic conditions.
• Keep this device out of reach of children.
• Do not use in damp environments or expose to splashing water.
• Do not use in areas where electronic products are not permitted.
• Do not bend or crush the cable.
• Always pull the plug, not the cable, when disconnecting.
• Ensure the product is securely mounted before each journey.
• Observe applicable local traffic laws and regulations.
• Ensure components like airbags, safety areas, controls, instruments, visibility are not blocked or restricted.

Risk of Electric Shock (Vehicle)

• Do not open or operate if damaged.
• Do not use if the charging cable, adapter cable, or power cable is damaged.
• Do not attempt to service or repair yourself; leave to qualified experts.

Notes

• Note - 12V Line Voltage: The charger is compatible with 12V line voltage. ℹ️
• Note - Car Battery: Disconnect the product when not in use to protect your car battery from draining, as some vehicles supply power even when the ignition is off.
• Note - Car Charger: For some vehicles, the ignition must be switched on for the car socket to receive voltage. Refer to your vehicle's owner's manual. Use the enclosed car charger only.

Getting Started

Diagram A: Positioning the hands-free unit.

Position the supplied hook and loop strip in a suitable place in the car and attach the Bluetooth hands-free facility to it.

Diagram B: Connecting to the car's AUX socket.

Connect the 3.5mm jack plug (5) to the car's AUX socket.

Diagram C: Power connection.

Plug the USB car charger (1) into the car's cigarette lighter socket. Then, connect the USB plug (6) of the Bluetooth hands-free facility to the USB car charger.

Diagram D: Connecting a transmitting device via Bluetooth.

You can now connect your transmitting device (e.g., smartphone) to the Bluetooth hands-free facility.

Operation

6.1 First Connection via Bluetooth® (Pairing)

• Ensure your Bluetooth®-capable device is switched on and Bluetooth® is activated. Refer to your device's operating instructions.
• Connect the Bluetooth® hands-free facility using the 3.5mm jack socket (or AUX) to the receiving device (e.g., car radio).
• For power, plug the USB car charger (1) into the car's cigarette lighter socket and connect the USB plug (6) of the hands-free facility to the charger.
• The Status LED (9) will flash blue, indicating search mode.
• Activate Bluetooth® on your transmitting device (e.g., smartphone) and select the device "BT61".
• The Status LED (9) will light up solid blue when paired and ready.

Note - Bluetooth® Password

• Some devices require a password. If prompted, enter 0000, 1234, 1111, or 8888.

6.2 Terminating the Connection

• To switch off and disconnect, unplug the USB plug (6) from the USB car charger (1).

6.3 Automatic Connection

• To reconnect, simply plug the USB plug (6) back into the USB car charger (1).
• The last transmitting device is pre-set for fast connectivity.
• If this fails, establish a new connection (see 6.1).

6.4 Accepting Calls

• Press the multi-function key (2) once to accept a call.
• Press again to end the call.
• Press and hold the multi-function key for approximately 2 seconds to reject a call.

6.5 Bass Amplification

• To activate bass amplification, press and hold button (4) until the symbol lights up blue.

Charging Devices

Warning - Connecting Devices

• Before connecting a device, check if it can be adequately supplied by the charger.
• Ensure the connected device's power does not exceed 10.5 W.
• Note the instructions in your device's operating manual.

If no specific instructions are provided for the device being charged, proceed as follows:

• Connect your device to a USB charging port with a suitable USB cable.
• Connect the charger to the car's socket.
• The charging process will be displayed on your device.
• Disconnect the device from the charger to interrupt or when fully charged.
• Then disconnect the charger from the power source.

Button Functions

Call

Music Control

Status LED

Care and Maintenance

ℹ️Note:

• Disconnect the device from the mains before cleaning and during prolonged periods of non-use.
• Clean only with a slightly damp, lint-free cloth. Do not use aggressive cleaning agents.
• Ensure no water enters the product.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability or warranty for damage resulting from improper installation, mounting, misuse, or failure to observe operating/safety instructions.

Technical Data

Recycling Information

Note on Environmental Protection

Symbol for waste electrical and electronic equipment. Following the implementation of European Directive 2012/19/EU and 2006/66/EU, electrical and electronic devices and batteries must not be disposed of with household waste. Consumers must return used devices/batteries to designated public collection points or points of sale. Details are governed by national laws. The symbol on the product, manual, or packaging indicates these regulations. Recycling contributes to environmental protection. ♻️

Declaration of Conformity

CE marking Hama GmbH & Co KG hereby declares that the radio equipment type [00014167] complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00014167 -> Downloads.