Winix C545 Air Purifier - Use & Care Guide

Model Part Diagram

Front Components: Front Panel, Handle, Power Plug

Back Components: Air Outlet Vent

Package Contents: Unit, Pre-Filter, Activated Carbon Filters, True HEPA Filters, User Manual, Alexa Setup Guide / Wi-Fi Setup Guide. (Note: Certified Refurbished units include 4 new Carbon Filters and 1 True HEPA Filter).

Where to Use

• Allow 12-18 inches of space between the unit and other electronics to prevent electromagnetic interference.
• Place indoors away from direct sunlight to prevent malfunction.
• Only place on hard, flat surfaces to avoid noise and vibrations.
• Allow at least 12-18 inches from walls for maximum airflow.

Control Panel

• 01. Auto Mode Indicator: 'Auto' LED indicates Auto Mode is active.
• 02. Air Quality Indicator: Color-coded LED shows air quality: Red (poor), Amber (fair), Blue (good).
• 03. Fan Speed Indicator: Shows current fan speed (Auto, Low, Medium, High, Turbo).
• 04. Sleep Mode Indicator: 'Sleep' LED indicates Sleep Mode is active.
• 05. Filter Replacement Indicator: LED indicates when filters need replacement.
• 06. Filter Reset Button: Press and hold for 5 seconds after filter replacement to reset the indicator.
• 07. Smart Sensor: Detects odorous gas and adjusts fan speed in Auto Mode. Takes approx. 4 minutes to calibrate.
• 08. Power Button: Turns the unit on/off. Air Quality Indicator cycles during the first 30 seconds.
• 09-1. Fan Speed/Auto/Sleep Buttons: Cycle through fan speeds: Auto, Low, Medium, High, Turbo, Sleep.
• Auto Mode: Automatically adjusts fan speed based on air quality.
• Sleep Mode: Disables Air Quality Indicator LED, sets fan to near-silent speed, and disables PlasmaWave®.
• 09-2. PlasmaWave® Button: Press to enable or disable PlasmaWave®. Enabled by default. A chirping/buzzing sound is normal.
• 10. PlasmaWave® Indicator: Shows if PlasmaWave® is enabled or disabled.
• 11. Wi-Fi Button: Press for 3 seconds to activate pairing mode. Press to turn Wi-Fi on/off.
• 12. Wi-Fi Indicator: Shows Wi-Fi status. Flashes during pairing, solid white when paired.
• 13. Light Sensor: Detects ambient light. Activates Sleep Mode in Auto Mode when dark.

Winix Smart Wi-Fi Setup

Requires a 2.4Ghz or newer wireless router and Android 5.0+ or iOS 10.0+ smartphone. Disable VPNs before connecting.

1. Download the Winix Smart app from Google Play or iTunes.
2. Run the app and follow the setup guide:
1. Select 'New Unit' and choose C545.
2. Read notice and select 'OK'.
3. Enter Wi-Fi password.
4. Press and hold the Wi-Fi button on the unit until it beeps. Wi-Fi indicator will blink.
5. Connect to the Winix Smart network via your device's network menu. Select 'Next' to connect.
6. Define unit settings (Name and Location).
3. The Winix Smart Indicator will light up upon successful setup.

4-Stage Air Purification

1. Pre-Filter: Catches larger airborne particles.
2. Activated Carbon Filter: Reduces VOCs and odors from cooking, pets, and smoke.
3. True HEPA Filter: Captures 99.97% of airborne allergens (pollen, dust, smoke, pet dander) as small as 0.3 microns.
4. PlasmaWave®: Reduces airborne bacteria and Influenza A Virus.

Maintenance

When to Replace Filters

Filter replacement intervals may vary depending on the environment.

Initial Operation

1. Remove the front panel by grasping its upper edge and pulling gently forward.
2. Remove the Pre-Filter, then the bag of filters behind it.
3. Remove filters from their protective plastic bags.
4. Install filters securely: Pre-Filter (front), Activated Carbon Filter (middle), True HEPA Filter (back).
5. Close the front panel.
6. Insert the power cord into an electrical outlet.

Replacing Filters

Use WINIX Genuine Replacement Filters. Contact Winix at (877)699-4649, info@winixinc.com, or visit www.winixamerica.com for questions or orders. Item: 1712-0096-00.

Cleaning Care

Cleaning the Filters:

• Pre-Filter: Vacuum or use a soft brush. Rinse in room temperature water if excessively soiled (do not use detergent/soap). Allow to dry for 24+ hours. Do not use hot water over 104°F or volatile fluids.

Resetting Filter Life:

After replacing the True HEPA Filter, close the front panel. While the unit is on, hold the Filter Reset Button for at least 5 seconds until a beep is heard. The Filter Replacement Indicator will disappear.

Cleaning the Exterior & Interior:

• Wipe the exterior with a soft, damp cloth (room temperature water), then dry with a clean cloth.
• Clean the interior with a vacuum cleaner.
• Clean every 1-2 months for optimal performance.

NOTICE: Always unplug the power cord before cleaning and wait for the unit to cool down. Never disassemble, repair, or modify the unit yourself. Do not use flammable sprays or liquid detergents. Do not allow children to clean or maintain the unit.

Safety and Cautions

• Ensure filters are inserted before running the unit.
• Do not insert foreign objects into the vents.
• Do not touch interior parts with wet hands.
• Ensure intake and outlet vents are not blocked.
• Do not use the unit as a step stool or place heavy objects on it.
• WARNING: If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
• Supervise children to ensure they do not play with the appliance.
• Do not pull the power cord when unplugging.
• Do not tie or knot the power cord during operation.
• If the unit is submerged in water, unplug and contact customer service.
• Do not unplug or move the unit while in operation.
• Do not plug additional appliances into the same outlet.
• Do not touch the plug with wet hands.
• Unplug the unit when not in use for extended periods.
• Do not place near heating elements, mist/fumes from industrial oil, or metallic dust.
• Do not place in motor vehicles, areas with excessive noxious gases, or near flammable materials.
• Do not have the unit facing into wind or drafts.
• Do not place below any electrical outlet.
• Do not place in excessively humid areas.
• Do not place unit closer than 12 inches from the wall during operation.

Safety Instructions

• Read and follow all safety cautions.
• Do not repair or modify the unit; all repairs should be done by a qualified technician.
• The unit's plug is polarized; do not force it into an outlet. Reverse if it doesn't fit.
• Do not use if the power cord or plug is damaged or the outlet connection is loose.
• Use AC 120V only.
• Do not damage, bend, pull, twist, bundle, coat, pinch, or place heavy objects on the power cord.
• Periodically remove dust from the power plug to reduce shock risk.
• Unplug the unit before cleaning. Grasp the plug, not the cord, when unplugging.
• Do not block intake or outlet vents.
• Do not use near hot objects like stoves or where the unit may contact steam.
• Do not operate the unit on its side.
• Keep away from products that generate oily residue.
• Do not use detergent to clean the unit.
• Remove the power plug when not in use.
• Do not operate when using indoor smoke-generating insecticides.
• Do not clean the unit with benzene or paint thinner.
• Do not spray insecticides on the unit.
• Do not use where it is humid or where the unit may become wet.
• Do not insert fingers or foreign objects into air vents or fan.
• Do not use near flammable gases, cigarettes, incense, or other spark-creating items.
• Unit will not remove carbon monoxide.
• Unplugging the product disconnects remote functions.
• Do not operate without a filter.
• Do not wash and reuse the True HEPA Filter.
• Hold the unit by the handle on the back for transport; do not hold by the front panel.
• Do not stick small objects into air outlet vents or fan.

Frequently Asked Questions

• Unit does not turn on: Ensure plug is securely attached to a powered outlet. Check for power outages.
• Unit doesn't work in Auto Mode: Ensure Auto Mode is selected. Check if the Smart Sensor is blocked or clogged; wipe with a damp cloth and dry.
• Vibrates and makes noise: Ensure the unit is on a hard, flat, even surface.
• Power plug and outlet feel hot: Ensure the plug is properly and securely plugged into the outlet.
• Strange smell: Clean air intakes and Pre-Filter. Replace Carbon and True HEPA Filters.
• Fan strength is weak / not purifying air: Check if the 'Check Filter' Indicator light is on; replace filters as required.
• Display panel is dim: If Auto Mode is on, the unit may enter Sleep Mode when the Light Sensor detects darkness.

Product Warranty

• The warranty is voided if product failure results from negligence or misuse.
• Proof of purchase is required for warranty claims. Register your product at winixamerica.com.
• Warranty is valid only in the USA and Canada.
• Certified Refurbished Air Purifiers come with a 1-year warranty.
• For more information, visit https://winixamerica.com/terms-and-conditions/

Unit Specifications

• Model Name: C545
• Power Voltage: AC 120 V/60 Hz
• Power Rate: 65 W
• Verified Room Size: 360 sq.ft.
• Dimensions: 13.7 in(W) x 8.4 in(D) x 20.5 in(H)
• Weight: 11 lbs
• Replacement Filter: Filter S / SKU: 1712-0096-00

Specifications may change without prior notice to improve product performance.

Compliance Information:

• This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).
• Meets California ozone requirements.
• CARB Certified.
• CULUS LISTED.
• ENERGY STAR certified.

Contact Information

• Dedicated Call Center: ☎ (877) 699-4649
• Website: www.winixamerica.com
• For inquiries, specify model name/number, problem nature, contact information, and address.