Canor AI 2.10 Integrated Hybrid Amplifier User Manual

Introduction

Dear music lover, thank you for purchasing the CANOR AI 2.10 integrated hybrid amplifier. To preserve and maintain the best characteristics of your amplifier, please read this manual carefully.

Product Image Description: The front panel of the Canor AI 2.10 Precision Tube Hybrid Amplifier features a large central control knob, a POWER button, a DIMM button, a MUTE button, and input indicators (XLR 1, XLR 2) along with a digital display showing input selection and volume level (e.g., IN1-27dB).

Safety Instructions

Please read these instructions before putting the device into operation.

1. Read all safety and user instructions before using the amplifier.
2. Keep this user manual for possible later use.
3. Follow all safety and user instructions.
4. Do not place the AI 2.10 amplifier near water (e.g., bathtubs, swimming pools, kitchen sinks).
5. Do not use accessories not recommended by the manufacturer.
6. Placement: Do not place the device on an unstable pad. Use only pads or racks recommended by the manufacturer. Ensure placement is in accordance with manufacturer's instructions and use only recommended accessories.
7. Ventilation: Ensure proper air flow. Do not place the amplifier on sofas or upholstered furniture. Do not cover the amplifier during operation to prevent blocking vent holes.
8. Heat: Place the amplifier away from heat sources like radiators or stoves. Maintain a minimum distance of 20 cm from the back wall and 20 cm above the unit. Ensure a 20 cm minimal distance from other objects alongside the unit.
9. Power Source: Connect the device only to the mains supply for which it is designed.
10. Power Cord: Position the power cord to avoid being stepped on and protect it against mechanical damage.
11. Non-Use: If the AI 2.10 amplifier is not used for an extended period, disconnect the power cord from the mains supply or turn off the main power switch on the back panel.
12. Liquids: Do not place objects containing liquid (vases, flowerpots) where they could fall onto the amplifier or leak onto it.
13. Damages Requiring Service: Equipment should be repaired only by qualified service if: a) power cord is damaged, b) device dropped into water or was exposed to liquid, c) device was exposed to rain, d) device works incorrectly, e) device fell or is mechanically damaged.
14. Repairs: All repairs must be entrusted to qualified service.
15. General Warning: Use the device only in accordance with this user guide.

The manufacturer declines any liability if these safety measures are not observed. To avoid electric shock, do not expose the amplifier to rain or moisture! ⚡

Delivery Content

• Shipping packaging
• CANOR AI 2.10 integrated amplifier
• Power cord
• Remote control (containing AAA batteries - 2 pcs)
• CANOR AI 2.10 user manual

Caution! WEEE Directive

This device must not be disposed of in unsorted municipal waste. Please return it to a collection center for recycling and disposal of electrical and electronic equipment waste. Proper disposal helps prevent negative impacts on the environment and human health, contributing to environmental protection. ♻️

Remote Control

Insert two AAA-sized batteries into your remote control, observing polarity. Do not expose the remote control sensors to direct sunlight or other strong light sources.

The remote control operates within a 60° angle up to approximately 5 meters. Aim the remote control at the device's sensor, ensuring no obstacles are between them. Placing the unit behind glass may shorten the operating distance.

Keys on the remote control function identically to those on the front panel.

Remote Control Functions (Amplifier & CD Player):

• VOLUME +/-: Volume control keys for the amplifier.
• INPUT: Input switching for the amplifier.
• AMP_ON/OFF: Turns the amplifier on and off.
• Large power button: Turns off both the amplifier and CD player simultaneously.

CD Player Functions:

• CD ON/OFF: Turns the CD player on and off.
• Numeric keypad (0-9): Direct track selection.
• Numeric key 0: Selects CD inputs (1.CD, 2.COAXIAL, 3.OPTICAL, 4.USB).
• Numeric keypad +10: Selects tracks with numbers higher than 10.
• REPEAT: Allows cyclical selection of single track repeat, entire disc repeat, or disabling repeat.
• BACKWARD |<<: Briefly pressed, jumps to the beginning of a track (if playback time > 5s); further presses jump one track back. Held down, playback moves smoothly backward.
• FORWARD >>|: Briefly pressed, jumps one track forward; held down, playback moves smoothly forward.
• OPEN: Closes and ejects the CD tray.
• STOP: Ceases CD disc playback.
• PLAY/PAUSE: Resumes or pauses CD disc playback.

Front Panel Controls

• MUTE: Pressing this button instantly mutes the volume. Pressing again restores the default volume.
• DIMM: Adjusts display brightness in six steps (0 = off, 5 = maximum). The default brightness is 3. Repeated pressing or holding the button lowers brightness (2, 1, 0) then cycles up to maximum (5) and back down. When the display is off, function keys will briefly light it up to brightness 2 before turning off again after a few seconds.

European Community Directives

This product is designed and manufactured to comply with existing laws of the European Community. It has been certified by a testing laboratory and bears the CE mark. ✅

Basic Functions of Reproduction

Connect the power cord to the AI 2.10. Turn on the AI 2.10 using the main power switch located on the back panel. Upon switching on, the AI 2.10 enters stand-by mode, indicated by a red LED on the front panel. Pressing the Power button (on the front panel or remote control) initiates a controlled turn-on sequence, including cooling and preheating of the tubes to extend their lifespan.

The cooling cycle also operates when the unit is turned off via the front panel or remote control, provided the main switch on the back panel remains on. A 45-second countdown for cooling begins. If the unit is turned on during this period, the cooling continues, indicated by a flashing red LED. Once the cooling cycle is complete, the main toroidal transformer connects (the CANOR logo lights up), followed by a slow voltage start-up. This cycle lasts 45 seconds, after which the red LED stops flashing, and an output relay connects the signal to the last selected input, provided the main power supply was not disconnected.

During the first power-on or after disconnecting the main power supply, the IN1 input is preselected, and the volume is set to -44dB. Volume is adjustable in 63 steps of 1dB, ranging from 0dB (highest) to 63dB (lowest), with an additional MUTE step. Volume can be controlled using the large control knob on the front panel. The volume is managed by a relay attenuator with an accuracy better than 0.05dB.

The amplifier can connect to both 4 Ohm and 8 Ohm loudspeakers.

Specifications

Guarantee Conditions

The CANOR AI 2.10 integrated tube amplifier is guaranteed against defects in materials and workmanship for a period of 24 months from the date of purchase. Audio vacuum tubes are covered by a warranty for three months.

The warranty is valid only upon presentation of an original proof of purchase and an acknowledged warranty certificate. The warranty covers defects in materials and labor but does not cover misuse, unauthorized modifications, or external causes such as acts of nature.