Dreame Cordless V9 Vacuum Cleaner User Manual
Safety Instructions
To prevent accidents including electric shock or fire caused by improper use, please read this manual carefully before use and retain it for future reference.
Warning
This product can be used by children aged from 8 years and above and persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risk of hazards. Cleaning and maintenance shall not be made by children without supervision.
The vacuum is not a toy. Children shall not play with or operate this product. Please exercise caution when using the vacuum near children. Do not allow children to clean or maintain the vacuum unless supervised by a parent or guardian.
Do not use the vacuum outdoors or on wet surfaces. Only use the vacuum on dry indoor surfaces. Do not touch the plug or any part of the vacuum with wet hands.
To reduce the risk of fire, explosion, or injury, check to make sure the lithium battery and charging adapter are undamaged before use. Do not use the vacuum if either the lithium battery or charger is damaged.
The soft roller brushbar, battery, metal connector pin, and vacuum are electrically conductive and should not be immersed in water or other liquid. Make sure to dry all filters after cleaning.
To prevent injury caused by moving parts, turn off the vacuum before cleaning the soft roller brushbar. The soft roller brushbar, dust compartment, and filter must all be properly installed before using the vacuum.
Only use the original charging adapter. Never use an unoriginal adapter, as this may cause the lithium battery to catch fire.
Do not use the vacuum to pick up flammable or combustible liquids, such as gasoline, or bleach, ammonia, drain cleaners or other liquids.
Do not use the vacuum to pick up drywall particles, ashes like fireplace ash, or smoking or burning materials such as coal, cigarette butts or matches.
Do not use the vacuum to pick up sharp or hard objects, such as glass, nails, screws, or coins, which may damage the machine.
Keep hair, loose clothing, fingers and other parts of the body away from the vacuum's openings and moving parts. Do not point the hose, wand or tools at your eyes or ears or put them in your mouth.
Do not put any object into the vacuum's openings. Do not use the vacuum with any opening blocked. Keep free of dust, lint, hair, or other items which may reduce airflow.
Do not rest the vacuum against a chair, table, or other unstable surface, as this may cause damage to the machine or personal injury. If the vacuum becomes damaged from being knocked over or is otherwise malfunctioning, please contact the authorized service department. Never attempt to disassemble the device on your own.
All instructions in the manual for recharging the battery must be strictly followed. Failure to properly charge the battery within the specified temperature range could damage the battery.
Only use accessories and replacement parts that are approved by Dreame. Do not use the vacuum without the clear dust compartment and filter in place.
Make sure the vacuum is unplugged when not used for extended periods as well as prior to performing any maintenance or repairs.
Please be extra careful when using the vacuum to clean stairs.
Do not install, charge, or use this product outdoors, in bathrooms, or around a pool.
Fire Hazard Warning: Do not apply any type of fragrance to the vacuum's filter. These types of products are known to contain flammable chemicals which may cause the vacuum to catch fire.
This product is designed for home use only.
We Dreame Trading (Tianjin) Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: www.dreame-technology.com
The symbol [diagram of two connected rectangles] means detachable supply unit.
Assembly
Getting to know your vacuum cleaner
Product introduction
The main unit of the vacuum cleaner is depicted, showing the motor housing, dust cup, and filter assembly. Labeled components include: Suction control switch, ON/OFF Button, Cyclone, Dust cup release button, HEPA filter. A metal extension wand attaches to the main machine. A nozzle is shown at the end of the wand, with a close-up view highlighting the Roller release button.
Accessories list
Diagrams of various vacuum cleaner accessories are displayed: a 2-in-1 Crevice tool, a Charger, a 2-in-1 Wide tool, an Anti acarids nozzle, and a Store base.
Assembling Procedures
Assembling the nozzle and the wand as picture shown.
Diagram illustrating the connection of the nozzle to the metal extension wand, and the wand to the main machine.
Installing the STORE BASE with the SCREW, need drill two holes (8mm diameter and 30mm in depth) on the wall.
Diagram showing the store base being mounted on a wall, indicating that two holes, each 8mm in diameter and 30mm deep, need to be drilled into the wall for secure installation.
Attaching Accessories
Assembling the accessories as picture shown.
Diagrams show how the various accessories (crevice tool, wide tool, anti-acarids nozzle) are attached to the main machine and then stored on the store base.
Attaching the accessories and main machine in STORE Base as picture shown.
Use your cleaner
Battery charging
Battery may be not fully charged when first time used. Charge the battery as below picture.
Diagram 1 shows the vacuum cleaner main unit placed on its charging dock, with the charger connected. Diagram 2 shows the battery being removed from the main unit and inserted into a separate charging cradle. A circular graphic with numbers 1 through 12 and a shaded segment indicates a charging time of 3-4 hours.
Indicators status
A close-up view of the indicator light area on the vacuum cleaner, with a legend showing different LED patterns and their corresponding battery status: Low battery, Middle battery, High battery, Full battery, and Full battery (sleep mode).
Operations
You can choose different suction settings from low to max mode by setting the suction control switch.
Diagram of the main machine showing the suction control switch with three positions labeled: Max, Normal, Low.
Use of soft-cloth roller
Soft-cloth roller can be used on carpet, hard wood or tile floor.
Vacuum cleaner will shut off nozzle power if nozzle was jammed.
Use of accessories
1. 2-in-1 Flat vacuuming head and anti acarids nozzle; suitable for cleaning surfaces of bed, sofa...etc.
2. 2-in-1 Brush vacuuming head; suitable for cleaning crevices corners...etc.
Maintenance
Cleaning dust cup and HEPA
Empty dust cup by dust cup release button when debris reaches the MAX fill line.
Diagram showing the dust cup with a 'MAX' fill line. An arrow indicates pressing the dust cup release button to empty the contents. Another diagram shows debris being expelled.
Clean the cyclone as below picture.
Diagram illustrating the removal of the cyclone assembly (step 1) and its reattachment (step 2) for cleaning.
Take off HEPA as below picture.
Diagram showing the HEPA filter being detached from the main unit (steps 1 and 2). Another diagram (step 3) depicts rinsing the HEPA filter under running water [water tap symbol]. A sun icon [sun symbol] with radiating lines is shown next to the text 'Make sure HEPA completely dry'.
Cleaning soft roller
Take off soft roller as picture.
Remove any string, hair, or debris that may be wrapped around the soft roller, wheel.
Diagram showing the soft roller brush head being detached from the wand. A close-up shows hair and debris wrapped around the roller, with an arrow [arrow] indicating removal. Another diagram shows the roller being reattached.
Cleaning anti acarids nozzle
Take off anti acarids nozzle cover.
Remove any string, hair, or debris that may be wrapped around the anti acarids nozzle.
Diagram showing the anti-acarids nozzle cover being detached ([lock symbol] indicated). An arrow [arrow] shows debris being removed from the nozzle.
Storage
Remove wand, nozzle, anti acarids nozzle and accessories from main machine, and store them at room temperature.
Troubleshooting
| Problem | Possible cause | Solution |
|---|---|---|
| Cleaner does not work | Low battery | Charge battery |
| No suction | Clean air path | |
| Weak suction | Dust cup and HEPA are dirty | Cleaning dust cup and HEPA |
| Nozzle jammed | Clean nozzle | |
| At starting, the first lamp lights up in red | Battery error | Contact dreame for service |
| At starting, the first lamp blinks in red | Wrong charger | Use right charger |
| Failure on battery charging | Poor charger connection | Make sure of good connection |
| Connection is good, but still not working | Contact dreame for service |
If none of the measures solved the problem you experience with the product, please contact dreame customer service for assistance.
After-sales services
If assistance is needed in operating dreame vacuum cleaner, please contact Customer Service by telephone number: 400 875 9511 or visit www.dreame-technology.com or postal mail to Shangjin wan Headquarters, building E3 economic garden, 2288 Wuzhong boulevard, suzhou, jiangsu.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
