Marta MT-1280 Hair Styler
User Manual
Product Description
The Marta MT-1280 is a hair styler designed for straightening hair.
Components
The hair styler consists of the following parts:
- 1. Housing
- 2. Ceramic heating plate
- 3. Hair brush
- 4. Work indicator (light)
- 5. On/off switch
Package Contents
The actual contents of the product may differ from the information provided in this manual. Please check the contents carefully when receiving the product from the seller.
Safety Precautions
Please read this instruction carefully before using the appliance and keep it for future reference.
- Ensure the appliance's voltage corresponds to your local electrical supply.
- For home use only. Not for industrial purposes.
- For indoor use only.
- Always unplug the appliance when not in use.
- Close supervision is necessary when used near children.
- Do not leave the appliance switched on unattended.
- Never carry or suspend the appliance by the cord.
- Do not operate if the cord, plug, or appliance is damaged, or after it has been dropped.
- Do not attempt to repair or modify the appliance yourself. Contact a service center for repairs.
- Using non-recommended accessories may be dangerous or damage the appliance.
- Always unplug the appliance before cleaning or when not in use.
- Do not immerse the appliance in water or other liquids to avoid electric shock or fire. If this happens, immediately unplug and contact a service center.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience, unless supervised or instructed by a responsible person. Keep children away from the appliance.
- Do not use in bathrooms or near water sources (sinks, tubs, basins).
- Do not touch the appliance with wet hands.
- The heating plates get very hot during operation. Be careful to avoid burns and contact with flammable materials.
- Allow the appliance to cool down completely before storing.
- [Warning] The appliance heats up during use. Do not touch hot surfaces; hold only the outer part of the housing.
- [Warning] If using the styler in a bathroom, unplug it after use, as proximity to water poses a risk even when switched off.
- Do not use near water sources like bathrooms, showers, or pools.
Before First Use
- Unpack the appliance and remove all packaging materials and labels.
Operating Instructions
Preheating
- For perfect hair styling, wash and dry your hair before use. Apply heat protectant; do not use hairspray.
- Unwind the power cord completely.
- Connect the appliance to the electrical supply.
- Move the ON/OFF switch (4) to the ON position. The indicator light (3) will illuminate.
- Wait 3-5 minutes for the appliance to heat up to operating temperature. Place the device on a heat-resistant surface.
- [Note] Initial use may produce a small amount of smoke or odor; this is normal and will disappear within approximately 30 seconds.
Hair Styling
- Divide hair into small sections.
- Slowly brush each section from roots to ends.
- Repeat until the desired result is achieved.
- Do not brush hair immediately after styling; wait for it to cool.
Shutdown
- Move the ON/OFF switch to the OFF position ('O'). The indicator light will turn off.
- Disconnect the appliance from the power supply by pulling the plug from the outlet. Do not pull the cord.
- Allow the appliance to cool completely before storage.
Cleaning and Care
- Unplug the appliance and let it cool down completely before cleaning.
- Wipe the housing with a clean, slightly damp cloth. Do not use abrasive materials or chemicals.
- Do not allow water or other liquids to enter the appliance.
- Do not wrap the power cord around the appliance body, as this can damage the cord.
- Store the appliance in a dry place.
Technical Specifications
| Specification | Value |
|---|---|
| Power Supply | 230 V ~ 50 Hz |
| Power | 25 W |
| Net Weight / Gross Weight | 0.200 kg / 0.250 kg |
| Package Size (L x W x H) | 245 x 60 x 72 mm |
| Producer | Cosmos Far View International Limited, Ningbo, China |
| Country of Manufacture | Made in China |
Warranty Information
The warranty does not cover consumables such as filters, ceramic and non-stick coatings, rubber seals, etc.
The production date can be found in the serial number on the product's packaging or device sticker. The serial number consists of 13 characters; the 4th and 5th characters indicate the month, and the 6th and 7th indicate the year of production.
The producer reserves the right to change the product's set, appearance, country of manufacture, warranty, and technical characteristics without prior notice. Please check at the time of purchase.
Current information about service centers is available on the website: http://multimarta.com
