Hot Water Heat Pump
All-In-One Select
Designed by Emerald, proudly Australian since 2006, the All-In-One Heat Pump Select combines efficiency, reliability, and smart Wi-Fi control in one powerful system.
Ideal for residential use, it delivers peak performance across a range of conditions. A built-in electric heater is also available to boost hot water supply when needed. Easily connect to Emerald App via Wi-Fi for convenient control using your mobile phone.
Key Features
- R290 Refrigerant: With a low GWP of 3 and excellent thermodynamic properties, R290 delivers superior performance and better efficiency.
- Built-in Wi-Fi Control: Enables convenient smart control for improved efficiency and savings.
- Emerald Network: Monitor all your heat pump installs remotely in real time.
- Solar Soaker: Automatically uses surplus solar energy to run the heat pump, delivering free hot water when paired with the Electricity Advisor Wi-Fi pack.
- Boost Mode: Quickly raise water temperature while maintaining low noise levels.
- Government Rebates: Leading energy-efficient technology for maximum rebates from schemes including VEU, ESS, REPS and CER.
Product Images and Dimensions
The product is available in 220L and 270L capacities. The data sheet includes diagrams showing the layout of connections and components for both the HPA1-S220/S220E and HPA1-S270/S270E models. These diagrams indicate:
- Condensate drain outlet
- Hot valve inlet
- TP valve connector
- Temperature sensor
- Cold water inlet
- Electric element (on E models)
- Magnesium rod
Unpacked Dimensions:
- HPA1-S220/S220E: 600mm*600mm*1750mm
- HPA1-S270/S270E: 600mm*600mm*1970mm
Unpacked Weight:
- HPA1-S220/S220E: 118kg
- HPA1-S270/S270E: 132kg
Specifications Table
| Specification | HPA1-S220E | HPA1-S220 | HPA1-S270E | HPA1-S270 |
|---|---|---|---|---|
| Power supply | 220V~240V/50HZ/1Phase | |||
| Water tank volume | 220L | 220L | 270L | 270L |
| Optional running modes | Standard / Boost / E-Heater | Standard / Boost | Standard / Boost / E-Heater | Standard / Boost |
| Electric heating element | 1kW | N/A | 1kW | N/A |
| Heating capacity | 2.8kW | 2.8kW | 2.8kW | 2.8kW |
| Rated input power | 0.68kW | 0.68kW | 0.63kW | 0.63kW |
| COP for heat pump (Standard mode) | 4.19 | 4.19 | 4.41 | 4.41 |
| Recharge rate (Standard mode) | 58L/h | 58L/h | 58L/h | 58L/h |
| Sound level at 1m | 50dB(A) | |||
| Heating capacity (Boost mode) | 3.8kW | 2.8kW | 3.8kW | 2.8kW |
| Rated input power (Boost mode) | 1.68kW | 0.68kW | 1.63kW | 0.63kW |
| COP for heat pump (Boost mode) | 4.19 | 4.19 | 4.41 | 4.41 |
| Recharge rate (Boost mode) | 79L/h | 58L/h | 79L/h | 58L/h |
| Heating capacity (E-Heater mode) | 1.0kW | N/A | 1.0kW | N/A |
| Rated input power (E-Heater mode) | 1.0kW | N/A | 1.0kW | N/A |
| COP for heat pump (E-Heater mode) | N/A | N/A | N/A | N/A |
| Recharge rate (E-Heater mode) | 21L/h | N/A | 21L/h | N/A |
| Max current (under boost mode) | 8.8A | 4.7A | 8.7A | 4.5A |
| Refrigerant | R290 (350g for S220/E, 450g for S270/E) | |||
| Compressor | GMCC (Toshiba JV) / Non-Inverter/ Rotary | |||
| Fan motor | Non-DC Inverter | |||
| Inner tank | Enamel/2.5mm tank wall / 3.0mm dome | |||
| Inner tank diameter | φ540mm | |||
| Tank insulation | Polyurethane / 35mm-157mm | |||
| Inner tank design | Concave | |||
| Fan type | Axial | |||
| Expansion valve | EEV | |||
| Defrost | 4-way valve | |||
| Emerald APP | Available | |||
| TPR valve | 850kPa | |||
| Rated outlet water temperature | 60°C | |||
| Max outlet water temperature (heat pump) | 70°C | |||
| Working range with element | -15°C-43°C | |||
| Working range without element | -7°C-43°C | |||
| IP class | IPX4 | |||
| Electric shock proof class | Class I | |||
| Unpacked dimension | 600mm*600mm*1750mm | 600mm*600mm*1750mm | 600mm*600mm*1970mm | 600mm*600mm*1970mm |
| Packed dimension (outdoor unit) | 650mm*680mm*1870mm | 650mm*680mm*1870mm | 650mm*680mm*2090mm | 650mm*680mm*2090mm |
| Unpacked weight | 118kg | 118kg | 132kg | 132kg |
| Gross weight (outdoor unit) | 126kg | 126kg | 141kg | 141kg |
Note: Modes like Booster and E-Heater are one-shot functions that reset to Standard mode as per AS/NZS 4234 modelling Standards. Test results are based on ambient conditions of 20°C/15°C and water temperature from 15°C to 55°C. Sound levels are measured at 1 meter in a hemi-anechoic chamber. Emerald App features and functionality are subject to regular updates.
Warranty Information
The product comes with a 5-year tank warranty and a 5-year parts warranty with 2 years labour.
