AUDOTA AME-200

The AUDOTA AME-200 is an advanced guitar effects processor offering comprehensive amp modeling and multi-effects capabilities. It features a user-friendly interface with a 3.5-inch color display, intuitive controls, and versatile connectivity options.

Main Unit Controls

Display and Encoders

3.5-inch Color Display: Visually presents the effect chain, status values, and various menu options.

EDIT Encoder: Allows users to select, toggle On/Off, and adjust parameters by pressing or rotating.

MASTER Knob: Controls the overall master volume level.

Buttons

SWITCH: Toggles the On/Off status of selected effect modules within the effect chain.

PLAY: Enters PLAY mode, typically displaying preset information.

SAVE: Used to save current settings and presets.

BACK: Navigates back to the previous page or the home display.

Footswitches

Footswitch A

Press: Switches to preset A in the current bank within the effect chain display.

Press and Hold: Enters Drum Machine mode. In Drum Machine mode, it scrolls down through drum grooves. In Looper mode, it functions as REC/DUB/PLAY.

Footswitch B

Press: Switches to preset B in the current bank within the effect chain display.

Press and Hold: Enters Looper mode. In Drum Machine mode, it scrolls up through drum grooves. In Looper mode, it functions as STOP/DELETE.

Footswitch C

Press: Switches to preset C in the current bank within the effect chain display.

Press and Hold: Enters Tuner mode. In Drum Machine mode, it plays/stops the drum machine. In Looper mode, it plays/stops the drum machine.

Footswitch D

Press: Switches to preset D in the current bank within the effect chain display.

Press and Hold: Enters Tap Tempo mode. This function is also available in Drum Machine and Looper modes.

Bank Navigation

Bank Down (Footswitch A + B): Scrolls down through preset banks.

Bank Up (Footswitch C + D): Scrolls up through preset banks.

Rear Panel Connections

EXP (Expression Pedal Input): A 1/4" TRS jack for connecting an external expression pedal.

OUTPUT: Dual 1/4" mono audio jacks for stereo or mono output.

USB-C Port: Connects to a computer for AME-200 software or for OTG direct recording.

INPUT: A 1/4" audio jack for connecting your instrument.

PHONE: A 1/8" stereo headphone output jack.

9V Power Port: Connects to the included power supply.

On-Screen Display Elements

Input Level Meter: Displays the incoming signal level from the instrument.

Preset Area: Shows the current preset number and name.

Expression Pedal Mode Indicator: Indicates if the expression pedal is off, set to volume mode, or wah mode (e.g., EXP:VOL).

Output Level Meter: Shows the output signal level for the left and right channels.

Effect Chain Area: Visualizes the loaded effect modules and their On/Off status within the effect chain.

Global BPM: Displays the global tempo. The EDIT encoder can be used to access BPM settings.

System Setting: Access the system settings menu using the EDIT encoder.

Drum Machine: Access the Drum Machine menu by using the EDIT encoder or holding Footswitch A.

Looper: Access the Looper menu by using the EDIT encoder or holding Footswitch B.

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.