Audota ACE-100 Intelligent Combined Effects Pedal Quick Guide
Precautions
Please Read Carefully Before Use. To prevent unexpected incidents caused by improper use, please strictly follow the basic precautions listed below. Please read them carefully before operation and use.
Power Adapter
Use a power adapter that meets the manufacturer's specified specifications and has been approved by relevant authorities, complying with local regulations (such as UL, CSA, VDE, CCC). Do not use the power adapter for charging in humid environments. Regularly inspect the power adapter and power cord for damage, and clean any dust or dirt from the plug to prevent poor contact that could damage the product. If the device will not be used for a long period or during thunderstorms, unplug the power adapter from the socket.
Battery
Do not turn on or charge the device when it is wet to avoid electric shock, device malfunction, or fire hazards caused by short circuits. Use only the designated charger to avoid electric leakage, overheating, malfunctions, or explosion hazards. Charge the battery within the specified temperature range to prevent electric leakage, overheating, damage, or explosion due to high temperatures. To prevent accidents, do not charge the device in environments containing flammable or explosive materials. Ensure the power socket is within reach so that charging can be stopped immediately in case of an emergency or malfunction. If the battery emits an unusual odor or noise during charging or discharging, stop charging immediately and contact after-sales support for inspection and repair. Do not disassemble or modify the battery yourself. Improper handling may cause device malfunction, chemical burns, or explosion hazards. Contact after-sales support for repairs if necessary. If the battery leaks, avoid contact with skin or eyes. If contact occurs and causes discomfort, seek medical assistance immediately. To prevent fire or explosion, do not disassemble, crush, or throw the battery into fire or water. If the battery swells, discontinue use. Do not use or store the battery in high-temperature environments. Do not use the battery if it has been submerged in water.
Cleaning
Do not use abrasive cleaning powders, alcohol, paint thinners, wax, solvents, detergents, or chemical agents to clean the device, as these may damage the surface coating.
Placement
Avoid prolonged exposure to direct sunlight. Keep the device away from heat sources. Avoid placing the device in excessively humid or extremely dry environments for extended periods.
Features
- Comes with Noise Gate, Boost, 8 Amp models, 8 IR Cab Sims, 3 Modulation effects, 3 Delay effects, and 3 Reverb effects.
- Customizable colors for ambient light strip via control App.
- Supports loading official sampling files and third-party IR loading, with 16 loading slots.
- Live Mode and Preset Mode operation.
- Up to 40 preset slots for preset storing.
- Integrated tuner function.
- Stereo effect output.
- Headphone output for practice.
- Bluetooth function for audio playback.
- OTG direct recording function via mobile device.
- Powered by an integrated lithium battery.
- Specialized mobile app and desktop management software.
Layout
- Module Knob: Toggle modules on/off, select effect types, and adjust parameters.
- A, B, C, D Footswitches: In PRESET mode, press footswitch to switch presets. In LIVE mode, press footswitch to toggle effect modules on/off and save presets. Pressing footswitches B+C switches LIVE/PRESET mode.
- Screen: LCD display shows preset groups and current operation mode.
- Bluetooth Indicator: Indicates Bluetooth status. Flashing: Waiting for connection. On: Connected.
- Footswitch Indicator: Indicates footswitch functions. Color of the light can be customized via the app.
- IN Jack: 1/4" mono input jack for connecting instruments.
- OUT Jack: 1/4" TRS output jack for stereo output, used to connect to speakers, other effect units, etc.
- Phones Jack: 1/8" stereo headphone output jack.
- OTG Port: For OTG recording by connecting a device via a USB-C cable and OTG adapter.
- Power Switch: Toggle the device On/Off.
- USB Charging Port & Charging Indicator: Connect a 5V 2A power source via USB-C for charging. Red light: Charging. Green light: Fully charged. Light Off: Not charging.
Connections
1. Standard Connection
Use a standard TS cable to connect the instrument to an amplifier or mixer for a normal mono setup.
2. Stereo Connection
Use a TRS-to-dual-TS cable from the OUT jack to connect the instrument to an amplifier or mixer for a stereo setup.
Specifications
| Category | Details |
|---|---|
| I/O Interface | Input: 6.35mm, 2M Output: 6.35mm, 100 Headphone Output: 3.5mm, 32 USB: USB-C, for charging or OTG recording |
| Bluetooth Version | 5.0 |
| Battery | Capacity: 2000mAh Duration: 5 hours Charging Time: 2.5 hours Charging Requirements: DC 5V/2A (charging only supports USB-C to USB-A data cable) |
| Impulse Response (IR) | Format: WAV Sample Rate: 44.1kHz (supports importing full sample rate files) Bit Depth: 24-bit Sample Points: 512pts |
| Dimensions & Weight | Size: L329 × W68 × H45mm Weight: 573g |
| Included Accessories | Quick Start Guide, USB Cable |
Document Printing Specifications
- Material: 80g paper, double-sided printing.
- Size: 555×260mm (folded: 185x65mm per page).
- Dotted lines are fold lines, do not print them.
- Do not smudge or cover the surface content.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
Certifications: CN, UL, CSA, VDE, CCC
Model Name: ACE-100 Quick Guide
Designer: Mo Jia Ling
Revision Date: 2025.04.04
