Lumascape QUADRALUX Q8 LS9180 Flood/Spotlight Installation Guide & Specifications

QUADRALUX Q8 LS9180

by LUMASCAPE

Safety Information

Please read and follow all safety instructions carefully. Failure to do so will void warranty.

WARNING: Product Warranty is void if product is not installed as per installation instructions and in compliance with all local and provincial codes.

  • Ensure installation complies with local electrical rules and regulations.
  • All electrical work must be performed by a licensed electrician.
  • Symbol 7: Protective earth; protective ground.
  • For LED Options 2,700K, 3,000K, Red, Green, Blue, RGBA, RGBW, Tunable White: This product contains a light source of energy efficiency class G.
  • For LED Options 3,500K, 4,000K, 5,000K: This product contains a light source of energy efficiency class F.
  • All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting luminaire as it may become hot.
  • Luminaire should only be used complete with protective shield. If protective shield is cracked, immediately stop using luminaire. Isolate light source, keep it dry and immediately contact Lumascape for replacement of protective shield (Symbol 10).
  • If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
  • The light source contained in this luminaire shall only be replaced by Lumascape or their service agent.
  • Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 124' (38 m) is not expected (Symbol 13).
  • Basic insulation has been maintained between line voltage and the control conductors.
  • To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach.
  • Ensure mains input power is surge protected.
  • Never make or break connections while the circuit is energized.
  • Do not make modifications or alter the product.
  • Keep luminaire clean and free of debris.
  • Only clean with warm water.
  • Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
  • Connections are to be kept clean and dry at all times.
  • Suitable for use indoors or outdoors.

Important Warnings:

  • CAUTION Risk of Electric Shock ⚡
  • Do Not Use Power Tools on Screws ??️
  • Keep Electronics Free From Dirt and Moisture ?
  • Keep Away from Flammable Materials ?
  • Do Not Hose or Pressure Clean ??
  • Do Not Use Silicone On Outside Surface ??
  • Do Not Cut Cable to the Luminaire ?✂️

Specifications

MODEL LS9180
PART NUMBER LS9180 - xx x xxx xx xx x 01 xx xx xxx / LS9180 - xX X XXX XX XX x 09 xx xx XXX
INSTALLATION TYPE FLOOD/SPOTLIGHT
IP RATING IP66/67 (Passes IP68 Test)
SUPPLY VOLTAGE 220-240~Vac, 50 Hz / 120/277~Vac, 60 Hz
INSTRUCTIONS COVER PowerSync™
DIMENSIONS (LxWxH) 22.4" x 2.8" x 13.5" (569 x 71 x 343 mm)
WEIGHT 28.6 lbs (13.0 kg)
MAX. PROJECTED AREA 1.22 ft² (0.12 m²)

Tools Required & Included Components

Tools Required

  • 6 mm Allen Key (for standard bracket)
  • 6 mm Allen Key (for 3G Rated bracket)

Included Components

  • Instructions
  • Luminaire
  • 6 mm Allen Key

Assembly Instructions

Standard Bracket Installation

  1. Mount the luminaire using the standard bracket.
  2. Secure screws to 180 lb-in (20 Nm) torque.

3G Rated Bracket Installation

  1. Mount the luminaire using the 3G Rated bracket.
  2. Secure screws to 360 lb-in (40 Nm) torque.

Wiring Designations

PowerSync (4-Core) - International

Designation Color (EN) Color (FR) Color (IT) Color (GE) Color (DK) Color (ES)
Active Brown Marron Marrone Braun Brun Marrón
Neutral Blue Bleu Blu Blau Blå Azul
Earth Green/Yellow Vert/Jaune Verde/Giallo Grün Gelb Grøn/Gul Verde/Amarilla
Not Used Black Noir Nero Schwarz Sort Negro

Note: Do not Hi-Pot test.

PowerSync (4-Core) - North America

Designation Color (EN) Color (FR) Color (ES)
Active Black Noir Negro
Neutral White Blanc Blanco
Earth Green/Yellow Vert/Jaune Verde/Amarilla
Not Used Grey or Red Gris ou Rouge Gris o Rojo

Note: Do not Hi-Pot test.

Dimensions

The luminaire measures 22.4 inches (569 mm) in width, 2.8 inches (71 mm) in depth, and 13.5 inches (343 mm) in height.

Front View: Depicts the overall width and height of the luminaire.

Side View: Shows the depth of the luminaire.

Standard Bracket: This bracket is approximately 3.0 inches (76 mm) wide and 3.0 inches (76 mm) deep, with mounting holes of 0.6 inches (15 mm) in diameter.

Optional 3G Bracket: A larger bracket designed for higher load ratings. It has overall dimensions that accommodate significant mounting points, including holes with a diameter of 4 inches (11 mm).

Models: LS9180, Quadralux Q8 Facade Ceiling Light, Facade Ceiling Light, Ceiling Light, Quadralux Q8, LS9180

File Info : application/pdf, 2 Pages, 496.89KB

PDF preview unavailable. Download the PDF instead.

in0230-220304

References

Adobe PDF Library 16.0.5

Related Documents

Preview Water Tower Lighting Application Guide by Lumascape
Explore Lumascape's application guide for water tower lighting, featuring Quadralux and Linealux luminaires for dynamic architectural illumination. Learn about lighting control and Lumascape's capabilities.
Preview Lumascape Application Portfolio: Global Architectural Lighting Projects
Explore Lumascape's diverse portfolio of innovative architectural lighting solutions. This document showcases successful projects worldwide, highlighting expertise in LED technology, custom designs, and impactful illumination for iconic landmarks and public spaces.
Preview Lumascape FAISCA F3 LS9230 Installation and Safety Guide
Comprehensive installation instructions and safety warnings for the Lumascape FAISCA F3 LS9230 architectural lighting fixture. Covers wiring, mounting, and care for indoor and outdoor use.
Preview Lumascape ERDEN E4 LS3040 Architectural Luminaire Installation and Safety Guide
Comprehensive guide for the Lumascape ERDEN E4 LS3040 architectural luminaire, covering safety instructions, installation procedures, components, and wiring. Suitable for professional installation.
Preview Lumascape Kololux K6 & K8 Projector & Pendant Installation Guide
Comprehensive installation guide for Lumascape's Kololux K6 and K8 projector and pendant luminaires. Includes safety instructions, tools, components, wiring designations, and installation steps for surface and suspension mounting.
Preview Lumascape nBLZ In-Grade Luminaires Installation and Safety Guide
Comprehensive installation, circuiting, and safety guidelines for Lumascape's nBLZ In-Grade Luminaires. Learn about voltage requirements, cable management, transformer usage, and essential safety precautions for architectural and facade lighting.
Preview Lumascape pSHM Pendant Luminaire Installation Guide
Comprehensive installation guide for Lumascape pSHM pendant luminaires, covering wiring, transformer selection, and safety precautions. Includes multilingual instructions and circuiting guidelines.
Preview Lumascape UTID Underwater Luminaires: Installation, Circuiting, and Safety Guide
Comprehensive guide for Lumascape UTID underwater luminaires, covering installation, circuiting guidelines, transformer selection, and essential safety precautions for architectural and facade lighting applications.