SOUNDPEATS TrueCapsule2 User Manual

Contents

• English: 1-8
• Deutsch: 9-16
• Español: 17-24
• Français: 25-32
• Italiano: 33-40
• 日本語: 41-48
• 中文: 49-55

Manufacturer Information

Shenzhen SoundSOUL Information Technology Company Limited

Room 1308-1309, Building B, Huihal Square, Chuangye Road, Longhua District, Shenzhen, China. 518109

Support: support@soundpeatsaudio.com

Website: www.soundpeatsaudio.com

Package Content

The package typically includes SOUNDPEATS TrueCapsule2 earbuds, a charging case, a USB-C charging cable, silicone ear tips (S/M/L), and a user manual.

Specifications

Product Diagram

The product consists of two wireless earbuds and a charging case. The earbuds are designed to fit comfortably in the ear. The charging case is a compact unit with slots to hold and charge the earbuds.

Controls

Each earbud features a multifunction button for various controls.

• Power On: Automatically when opening the charging case, or manually by long-pressing the multifunction button for 1.5 seconds.
• Power Off: Automatically when placing earbuds back into the charging case and closing it, or manually by long-pressing the multifunction button for 10 seconds.
• Play/Pause: Automatically when wearing/removing earbuds, or manually by double-clicking the multifunction button.
• Volume Down: Single click the left multifunction button.
• Volume Up: Single click the right multifunction button.
• Previous Track: Long press the left multifunction button for 1.5 seconds.
• Next Track: Long press the right multifunction button for 1.5 seconds.
• Answer/Hang Up Call: Double click the multifunction button.
• Reject Call: Long press the multifunction button for 1.5 seconds.
• Switch Between Two Active Calls: Long press the multifunction button for 2 seconds.
• Activate Voice Assistant: Triple click the multifunction button.

Wearing the Earphones

1. Identify the left and right earbuds.
2. Rotate the earbuds and adjust them to find the most comfortable and secure angle.

Getting Started: Pairing & Re-pairing

Initial Pairing

1. When the charging case is powered, open it. The earbuds will automatically enter TWS pairing mode and connect to each other.
2. The charging case indicator will flash white, and a voice prompt "pairing" will indicate pairing mode.
3. On your device's Bluetooth list, select "SOUNDPEATS TrueCapsule2" to connect.
4. A voice prompt "connected" will be heard from the right earbud upon successful connection. A secondary pairing request for "SOUNDPEATS TrueCapsule2 L" may appear; select it to complete pairing.

Automatic Reconnection

SOUNDPEATS TrueCapsule2 earbuds remember previously paired devices. To reconnect, simply activate Bluetooth on your device and take out both earbuds from the charging case. They will connect to each other and then to your device automatically.

If automatic connection fails, activate Bluetooth on your device and select "SOUNDPEATS TrueCapsule2" from the list.

Mono Mode

After successful pairing, the left and right earbuds can be used separately.

Note: For proper mono mode functionality, ensure you accept the "SOUNDPEATS TrueCapsule2 L" pairing request when prompted.

Changing Pairing Device

To pair with a new device while connected, place the earbuds back into the charging case, open it, and long-press the charging case button for 3 seconds to enter pairing mode.

Automatic Connection with Qualcomm Snapdragon

When connected to a mobile phone with a Qualcomm Snapdragon 855 chip or higher, the earbuds may automatically connect using a single pairing name, eliminating the need for manual selection of "SOUNDPEATS TrueCapsule2 L".

Factory Reset

Follow these steps if you encounter issues connecting the earbuds to each other or to your device.

1. Clear the pairing records between the earbuds and all your devices.
2. Place both earbuds back into the charging docks and open the charging case.
3. Long-press the charging case button for 10 seconds until the charging case LED flashes white twice, indicating a successful reset.

Charging

Charging the Earphones

1. Place the earbuds into their corresponding charging docks.
2. The charging case LED will flash to indicate the earbuds are properly seated.
3. Close the charging case to begin charging the earbuds.

The earphones are partially charged at the factory. Ensure they are fully charged before first use.

Charging the Case

Charge the case when its battery is low, indicated by a red LED indicator.

1. Connect the charging port to a Type-C charging adapter (ensure current does not exceed 1A).
2. If the case is not in use for an extended period, charge it at least once every 3 months.

Warranty

SOUNDPEATS warrants this device for 12 months from the original purchase date against manufacturer defects.

For support, contact: support@soundpeatsaudio.com

Visit: www.soundpeatsaudio.com

Please scan the QR code to check the detailed PDF manual in more details https://soundpeatsaudio.com/downloads/

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.