SOUNDPEATS Mini Pro Wireless Earbuds User Guide

Getting Started: First Use and Pairing

To begin using your SOUNDPEATS Mini Pro wireless earbuds:

1. Open the charging case lid and remove both earbuds.
2. Remove the insulating film from the charging contacts on the earbuds.
3. Place the earbuds back into the charging case.
4. The earbuds automatically pair with each other when removed from the case. The main earbud's LED indicator will flash red and white alternately, while the secondary earbud's LED remains white.
5. Activate Bluetooth on your device (e.g., smartphone, tablet).
6. Select "SOUNDPEATS Mini Pro" from the Bluetooth device list to complete the pairing process.

Key Features

Active Noise Cancellation (ANC) Modes

Switch between listening modes by pressing and holding the left Multi-Function Button (MFB) for 1.5 seconds:

• Normal Mode: Standard audio playback.
• ANC ON: Engages active noise cancellation to reduce ambient sounds.
• Pass Through Mode: Allows external sounds to be heard for situational awareness.

Product Overview and Wearing

Product Components: The SOUNDPEATS Mini Pro includes two wireless earbuds (left and right) and a charging case. Each earbud features a touch-sensitive control area and charging contacts.

Wearing the Earbuds: For optimal comfort, sound quality, and ANC performance, insert the earbuds gently into your ear canals. Ensure a secure fit by finding the correct angle.

Touch Controls

Control your music, calls, and modes with intuitive touch gestures:

Resetting the Earbuds

To resolve connectivity or performance issues, perform a factory reset:

1. On your connected device, navigate to Bluetooth settings and remove/forget "SOUNDPEATS Mini Pro".
2. Place both earbuds back into the charging case, ensuring they are properly seated and charging.
3. Press and hold both MFB buttons simultaneously for 10 seconds. The LED indicators on both earbuds will flash red and white twice, confirming the reset.

LED Indicator Guide

Earbud LED Status:

• Red: Earbud is currently charging.
• LED Off: Earbud is fully charged.

Charging Case LED Status (Battery Level):

• When charging the case: The LED flashes slowly.
• When the case is charged:
  • Red: Battery level is less than 20%.
  • Yellow: Battery level is between 20% and 69%.
  • Green: Battery level is between 70% and 99%.
  • Solid Green: Battery is fully charged (100%).

Frequently Asked Questions (Q&A)

Q1: What do the earbud LEDs indicate?

The earbud LEDs glow red while charging and turn off once fully charged.

Q2: How can I interpret the charging case LED indicators?

The charging case LED shows the battery level: Red (<20%), Yellow (20%-69%), Green (70%-99%), Solid Green (100%). When the case itself is charging, its LED flashes slowly.

Q3: What is the correct procedure for charging the case?

Use a Type-C adapter with a current not exceeding 1A. If the earbuds and case will be stored for extended periods, it is recommended to charge them at least once every three months to maintain battery health.

Q4: Why do my earbuds remain connected to my phone after I place them back in the case?

This typically occurs if the charging case has no battery power, preventing it from signaling the earbuds to turn off. Ensure the earbuds are correctly seated within the case and that the charging contacts on both the earbuds and the case are clean. A soft microfiber cloth can be used for cleaning.

Q5: The advertised battery life seems inaccurate?

A single charge provides approximately 7 hours of playback in Normal Mode and 5 hours in ANC Mode. The charging case includes enough power for two additional full recharges of the earbuds. The total playtime (e.g., 21 hours) is achieved by combining the earbud's playback time with the recharges provided by the case.

Compliance and Safety Information

FCC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the user's authority to operate the equipment.

Industry Canada (IC) Compliance

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to two conditions: (1) the device may not cause interference, and (2) the device must accept any interference, including interference that may cause undesired operation.

RF Exposure Statement

The device has been evaluated to meet general radio frequency (RF) exposure requirements and can be used in portable exposure conditions without restriction.

Environmental Disposal

The symbol of a crossed-out waste bin on batteries or accumulators signifies that they must not be disposed of with household waste at the end of their service life. If batteries contain mercury (Hg), cadmium (Cd), or lead (Pb), their respective chemical symbols will be indicated below the bin symbol. Users are legally required to return used batteries and accumulators. This can be done free of charge at retail stores or designated collection points.

Electrical and electronic equipment (EEE) that has become waste must be collected separately from unsorted municipal waste. Owners of waste equipment are responsible for ensuring its proper disposal through designated collection and return systems. Users are also responsible for deleting any personal data stored on the equipment before disposal.