ULINE H-7435, H-7436 Service Cart

Tools Needed

• Phillips Screwdriver
• Rubber Mallet

Parts

• Support x 8
• Swivel Caster x 4
• Caster Socket x 4
• Shelf x 3
• Screw x 4
• Handle x 2

Assembly

1. Step 1

   Insert caster sockets into each corner of a shelf. Tap securely into place with a rubber mallet. (Illustration shows caster sockets being inserted into the corners of a shelf, with arrows indicating tapping with a mallet.)

2. Step 2

   Tap casters into the caster sockets using a rubber mallet. (Illustration shows casters being inserted into the sockets on a shelf, with arrows indicating tapping with a mallet.)

3. Step 3

   Tap supports onto the bottom shelf using a rubber mallet. (Illustration shows four supports being tapped into the corners of the bottom shelf.)

4. Step 4

   Tap the middle shelf onto the supports using a rubber mallet. (Illustration shows the middle shelf being placed onto the supports and tapped into position.)

   CAUTION: Mallet should not be used directly on corners. Carefully tap on either side adjacent to each corner.

5. Step 5

   Tap supports onto the middle shelf using a rubber mallet. (Illustration shows four supports being tapped into the corners of the middle shelf.)

6. Step 6

   Tap handles onto the top shelf using a rubber mallet. Insert screws into the underside of the top shelf and secure handles using a Phillips screwdriver. (Illustration shows handles being attached to the top shelf, with screws being inserted from below.)

7. Step 7

   Tap the top shelf onto the supports using a rubber mallet. (Illustration shows the top shelf being placed onto the upper supports and tapped into position.)

   CAUTION: Mallet should not be used directly on corners. Carefully tap on either side adjacent to each corner.

8. Step 8

   Ensure all components are fully seated by tapping with the rubber mallet.