Victrola Premiere V1 Stereo Turntable

Overview

This section provides a visual overview of the Victrola Premiere V1 Stereo Turntable.

Top View Components:

• Turntable Platter: The surface where the record is placed.
• Slipmat: A mat placed on the platter to protect records and reduce static.
• Tone Arm: The arm that holds the cartridge and stylus, tracking the record groove.
• Cartridge: Houses the stylus (needle) and converts record vibrations into electrical signals.
• Tone Arm Lift Lever: Used to manually raise and lower the tone arm onto the record.
• Anti-Skating Knob: Adjusts the inward force on the tone arm to counteract skating.
• Tone Arm Counter Weight: Balances the tone arm to apply the correct tracking force.
• 45 RPM Adaptor: A small disc used for playing 45 RPM records with larger spindle holes.
• Function Knob: Controls power, volume, and cycles through playback modes.
• Back Panel: Contains various connection ports.

Back View Components:

• Dust Cover: Protects the turntable from dust when not in use.
• Subwoofer RCA Output (Line Jack): Connects to an external subwoofer.
• Optical In Jack: Connects to a TV or other digital audio source.
• Record Speed Switch: Selects between 33-1/3 RPM and 45 RPM.
• Subwoofer Pair Button (Wireless): Used for pairing with a wireless subwoofer.
• Headphone Jack: For connecting headphones or earbuds.
• Aux-In Jack: Connects to auxiliary audio devices.
• AC Power Port: Connects the unit to a power source.

Remote Control:

• Power / Function Button: Turns the unit on/off and cycles through functions.
• Volume Control (+/-): Adjusts the audio volume.

Quick Start Guide

Function Knob - Basic Operation:

• Power: Press and hold for 1-2 seconds to turn the unit ON or OFF.
• Volume: Rotate to raise or lower volume.

Function Knob - To Cycle Through Features:

• VINYL: Press to enter record player function mode. (Ring Color: White)
• VINYL STREAM: Press to connect the unit to an external Bluetooth speaker. (Ring Color: White, flashes when searching, solid when connected)
• BLUETOOTH: Press to pair the unit with a Bluetooth device (smartphone). (Ring Color: Blue, flashes when searching, solid when connected)
• OPTICAL IN (TV): Press to play audio from a connected TV. (Ring Color: White)
• AUX-IN: Press to play audio from a connected auxiliary device. (Ring Color: White)

Function & Voice Prompt:

• POWER ON: Press and hold for 1-2 seconds.
• POWER OFF: Press and hold for 1-2 seconds. The unit will return to the last used function mode upon powering back ON.
• VINYL PLAYING: Prompt: "Vinyl".
• VINYL STREAM: Prompt: "Vinyl Stream". Dial flashes when searching, turns solid when connected. Internal speakers are disengaged in this mode.
• BLUETOOTH: Prompt: "Bluetooth". Dial flashes when searching, turns solid when connected.
• OPTICAL IN (TV): Prompt: "TV Optical".
• AUXILIARY IN: Prompt: "Auxiliary".
• RAISE VOLUME: Rotate dial clockwise. Dial brightens. Unit chimes at max volume.
• LOWER VOLUME: Rotate dial counter-clockwise. Dial brightens.

Remote Control Functions:

• POWER / FUNCTION BUTTON: Press and hold for 1-2 seconds for Power ON/OFF. Quickly press to cycle through features.
• VOLUME CONTROL: Press '+' to raise volume, press '-' to lower volume.

Remote Control Battery Replacement:

The remote requires 2x AAA batteries. Ensure correct polarity (+/-) is observed. Refer to the "Safety Info" section for battery warnings.

Simple Setup

Getting Started:

Remove the needle cover by gently pulling towards the front. Carefully plug in the unit, install the platter and tone arm weight. It is recommended to use the power source indicated on the rating label. The unit uses AC power from a standard wall outlet.

Basic Operation:

Use the Function Knob: Press and hold for 1-2 seconds to turn the unit ON or OFF. Cycle through modes: VINYL (for records), VINYL STREAM (for external Bluetooth speakers/headphones), BLUETOOTH (for smartphone audio), OPTICAL IN (TV) (for TV audio), AUX-IN (for auxiliary devices). Rotate the knob to adjust volume.

Connections:

• RCA LINE OUT: Use red & white plugs on the back to connect to an amplifier/stereo. Reduce the record player's volume to minimum before connecting. (RCA cord not included).
• HEADPHONE: Use the headphone jack on the back to connect headphones/earbuds. Reduce the record player's volume to minimum before connecting.

Platter / Belt Drive Installation:

1. Place the platter onto the turntable. The belt is pre-installed underneath the platter.
2. Find the guide string taped to the platter. Carefully remove the tape while holding the string.
3. Use the string to pull the belt over the motor pin. Once the belt is on the motor pin, discard the guide string.

Tone Arm Setup

Important: Incorrect tone arm setup can damage the unit or records.

1. Identify the counter weight on the back of the tone arm. Use the included 2.5mm hex key to loosen the set screw.
2. Remove the needle cover. Lift the tone arm out of its holder to the left so it floats freely, not touching anything.
3. Turn the counter weight on the back of the tone arm until the tone arm is flat and balanced.
4. Set only the "number" ring so "0" is in the top-most position. Ensure the rear weight and number ring move separately.
5. Holding both the number ring and counter weight, rotate counter-clockwise 1 1/2 rotations until you reach "1". Tighten the set screw.
6. Once the counter weight is set, adjust the anti-skate control to the recommended setting of "1.5".

The counter weight sets the tone arm to 3 grams of downward force, the recommended tracking weight for the cartridge. (One full counter-clockwise turn of the counter weight equals 2g).

Anti-Skating Adjustment: This function compensates for inward tracking force, especially near the record's center or end. For the included cartridge, the recommended setting is "1.5". Adjust as needed if you experience skipping or tonearm pulling.

Vinyl Playing

Note: Ensure the tone arm is properly set up before playing. Refer to the "Tone Arm Setup" page.

1. Turn the unit ON by pressing and holding the Function Knob for 1-2 seconds. Ensure it is in Vinyl mode (dial illuminates white).
2. Remove the needle cover by gently pulling towards the front.
3. Select the correct record speed (33-1/3 or 45 RPM). Use the included 45 RPM adapter for 45s.
4. Release the tone arm from its holder and gently place it on the record using the lift lever.
5. Rotate the Function Knob to adjust volume as needed.

Notes:

• Touch records only at the center or edges to avoid damaging the vinyl grooves.
• Do not adjust the counter weight while playing a record, as this can damage the needle and scratch the record.
• If there is no sound, ensure the unit is in Vinyl mode (not Vinyl Stream). Cycle through the function knob if necessary.

The record will stop spinning automatically when playback is complete. To stop manually, lift the tone arm and return it to its rest.

Vinyl Stream

Play a Vinyl record on an external Bluetooth speaker or headphones.

1. Turn the unit ON by pressing and holding the Function Knob for 1-2 seconds. Ensure it is in Vinyl Stream mode (dial flashes white).
2. Turn on your external Bluetooth speaker or headphones and set them to pairing mode.
3. Wait for the unit to find your device. The unit will chime and say "Connected", and the Function Knob will remain white.
4. Use your external device to control the volume.

Notes:

• In Vinyl Stream mode, the unit's internal speakers are disengaged.
• For initial pairing, place the Bluetooth device within 1 meter (3.3 feet) of the product.
• Ensure the unit is within 10 meters (33 feet) of your external device for the strongest connection.
• Vinyl Stream is only compatible with vinyl record playback.
• The product stays in pairing mode for 30 seconds. If pairing fails, turn off all devices and repeat the steps.

Bluetooth Pairing

Connect and play music from a Bluetooth device (e.g., smartphone).

1. Turn the unit ON by pressing and holding the Function Knob for 1-2 seconds. Ensure it is in Bluetooth mode (dial flashes blue).
2. On your device, turn Bluetooth ON and search for/select "V1 SYSTEM".
3. The unit will chime and say "Connected", and the Function Knob will remain blue.
4. Use your external device to control playback. Rotate the Function Knob to adjust volume if needed.

Note: Ensure the unit is within 10 meters (33 feet) of your external device for the strongest connection. If no sound is playing, ensure the unit is in Bluetooth mode.

Optical In / Aux-In Listening

Optical In (TV):

Connect and play audio from a connected TV.

1. Turn the unit ON. Ensure it is in Optical In (TV) mode (dial illuminates white).
2. Plug one end of the included Optical In cable into the unit's Optical In socket. Plug the other end into your TV's Optical In socket.
3. Ensure your TV is set to output audio via the Optical In socket in its settings. Adjust volume on your TV.

Auxiliary In:

Connect and play audio from an auxiliary device.

1. Turn the unit ON. Ensure it is in Auxiliary In mode (dial illuminates white).
2. Plug one end of the Aux-In cable (not included) into the unit's Aux-In socket. Plug the other end into your device's Aux-In jack.
3. Adjust the volume on your device.

Subwoofer Pairing

Wireless Pairing the S1 Subwoofer (Sold Separately):

1. Turn on the S1 Subwoofer. Press its MODE button until the LED turns BLUE (slowly flashing indicates Wireless Mode).
2. Press and hold the S1 Subwoofer's MODE button for 1-2 seconds to enter Pairing Mode (LED quickly flashes BLUE).
3. On the V1 turntable, press and hold the PAIR button on the back for 1-2 seconds. You will hear a pairing notification.
4. Once paired, both units will chime, and the S1 Subwoofer's BLUE LED will remain solid.

Cartridge Replacement

Replacement Cartridge: Victrola VPC-190

The VPC-190 cartridge is rated for over 1000 hours of use. Replace it when sound quality degrades or the stylus is damaged.

1. Unplug the unit and place the needle cover on the old cartridge.
2. Carefully disconnect all wire leads from the back of the old cartridge.
3. Loosen the two allen head screws on the tone arm/cartridge using the included 2mm hex keys. Remove the old cartridge.
4. Mount the new cartridge, adjusting its position to ensure it tracks parallel to the record grooves. Tighten the screws.
5. Connect the wire leads to the new cartridge's pins:
   • WHITE: Left channel positive (L+)
   • RED: Right channel positive (R+)
   • BLACK: Left and Right channel negative (L- & R-)

For best results, use a cartridge alignment protractor. Download one at victrola.com/cartridgealignment.

Specifications

Safety Information

Important Safety Instructions:

1. Read and keep all safety and operating instructions for future reference.
2. Heed all warnings on the appliance and in the instructions.
3. Follow all operating and use instructions.
4. Do not use near water or moisture (e.g., wet basement, swimming pool).
5. Clean only with a dry cloth.
6. Do not block ventilation openings; install per manufacturer's instructions.
7. Do not install near heat sources (radiators, stoves, amplifiers).
8. Protect the power cord from being walked on or pinched.
9. Use only manufacturer-specified attachments/accessories.
10. Use only with specified carts, stands, tripods, brackets, or tables. Exercise caution with carts to prevent tip-over.
11. Unplug during lightning storms or when unused for long periods.
12. Refer all servicing to qualified personnel. Servicing is required if the unit is damaged (cord, plug, liquid spill, dropped, etc.), exposed to rain/moisture, or not operating normally.
13. The lightning flash with arrowhead symbol indicates dangerous voltage. Do not open the enclosure; refer servicing to qualified personnel.
14. The exclamation point symbol indicates important operating and maintenance instructions.
15. This is a Class II or double-insulated appliance; no safety connection to electrical earth is required.
16. The mains plug serves as the disconnect device and must remain operable.
17. WARNING: Do not expose to rain or moisture. Do not place liquid-filled objects on the apparatus.
18. Use in moderate climate.
19. Refer to exterior bottom/back enclosure for electrical and safety information before operating.
20. Do not impede ventilation openings with items like newspaper or curtains.
21. Do not place naked flame sources (e.g., lighted candles) on the apparatus.
22. Do not install in confined spaces like bookcases.

Before Use:

1. Choose installation location carefully: avoid direct sunlight, heat sources, vibrations, excessive dust, cold, or moisture. Keep away from humming sources like transformers.
2. Do not open the cabinet to avoid damage or electric shock. Contact Customer Service if a foreign object enters the unit.
3. Handle records with clean fingers. Never play a cracked record.
4. When unplugging, pull the plug directly, not the cord.
5. Use the white protective needle cover after use.
6. Clean the unit with a clean, dry cloth; do not use chemical solvents.
7. Unplug if not using for an extended period (e.g., vacation).
8. Keep this manual for future reference.

Battery Safety Information:

The remote uses 2x "AAA" batteries. Ensure correct polarity (+/-). Always use the same battery type; never mix types. Caution: Risk of explosion if battery is replaced with an incorrect type. Refer to rechargeable battery precautions. Remove batteries if the remote will not be used for over a month. Do not heat, disassemble, or dispose of batteries in fire. Dispose of batteries properly according to local regulations, not in standard garbage disposal sites.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, try correcting it by reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician. WARNING: Unauthorized changes may void user authority to operate. The device must not be co-located or operated with any other antenna or transmitter. Maintain at least 20cm distance from persons for FCC RF exposure compliance.

Industry Canada Statement (French and English):

Déclaration d'IC sur l'exposition aux radiations: This equipment complies with Canada's radiation exposure limits for uncontrolled environments. Install and use with a minimum 20cm distance between the antenna and your body. This transmitter must not be co-located or operated with any other antenna or transmitter.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

Warranty

Victrola is a registered trademark of Innovative Technology Electronics, LLC.

United States:

Victrola warrants this product to be free from defective materials and workmanship for one (1) year from the date of purchase. To obtain warranty service, contact the dealer where purchased with your original receipt. If dealer assistance is impossible, contact Victrola customer service at victrola.com/contact.

If the product proves defective within one year, Victrola will replace it at no charge. If the model is unavailable, Victrola will issue a merchandise credit for the purchase price redeemable at victrola.com.

Limitations:

• Warranty does not cover failure due to improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or normal wear/environmental deterioration.
• Does not cover cosmetic damage (paint) or consequential damage to other components or premises.
• Warranty is void if product is not used per Victrola's instructions.
• Warranty terminates if the original purchaser sells or transfers the product.
• Warranty is void for defects caused by installation or repair by unauthorized personnel.

This warranty provides specific legal rights, which may vary by jurisdiction. Implied warranties are limited to the warranty term. Some jurisdictions do not allow limitations on implied warranties or consequential damages. Victrola's liability is limited to replacement or repair. Maximum liability is the amount paid for the product.

Canada and US Territories:

Warranty complies with applicable law. Contact the dealer or distributor with your original receipt for service. If dealer assistance is impossible, contact victrola.com/contact. Defective products will be replaced. If the model is unavailable, a current model of equal or greater value may be provided.

Outside the U.S, Canada, and US Territories:

Warranty complies with applicable law. Contact the dealer or distributor with your original receipt for service.