CENTRALE VEDO 10, BOX PLASTICO, ALIM. 1.5A

The VEDO10 is an alarm control panel housed in a flame-retardant ABS wall-mount enclosure, equipped with a 1.5A switching power supply. It features 8 onboard zones, expandable to 18 (2 on keypad and 8 radio zones), and a 24-hour zone. It includes an integrated PSTN telephone communicator and an RS485 serial bus for connecting additional modules. The panel offers 1 relay output and 2 open collector outputs. It supports up to 2 areas, each with 2 different arming programs (scenarios) and daily timers. It also accommodates 2 proximity readers, 2 Safe Key keypads, 1 Safe Touch device, 1 Planux/Mini Touch Manager, and 1 radio receiver. A self-resettable fuse protects the siren power output, RS485 bus, and sensor power. A USB port allows connection to a PC for configuration using the Safe Manager software. All zones are configurable as NC, NO, single, double, or triple balanced. Dimensions are (L x H x P) 260 x 280 x 80 mm. It complies with EN50131 Grade 2 standards.

Main Features

FeatureSpecification
Total Inputs8 expandable to 18 (wired + radio)
On-board Inputs8
Balancing TypeNC, NO, single, double, triple, double zone, double zone EOL
Radio Zones8
Outputs7
On-board Relay Outputs1 (3A@24VDC)
On-board TC Outputs2
Areas2
User Codes8
Installer Codes3
Partitions2
Arming Programs (Scenarios)8
Time Bands4
Timers4
Audio Messages (Text to Speech)20
ProgrammingUSB, LAN
CertificationsEN50131 Grade 2, Incert

Communication

FeatureSpecification
Digital Communicator Phone Numbers4
Voice Communicator Phone Numbers16
Bus Connection TypeRS485
Max Email Addresses16
Digital Communicator IntegratedYes
Voice Guide Interface ManagementYes

Hardware and Software Features

Software/Firmware

FeatureSpecification
AppVedo
SoftwareSafe Manager

Hardware

FeatureSpecification
Height275 mm
Width255 mm
Depth75 mm
Weight1700 g
Operating Temperature-10 – 55 °C
Enclosure TypeABS
Tamper ProtectionYes
Power Supply Rating1 A

Expansion Modules (BUS)

Module TypeQuantity
Proximity Readers2
Safekey Keypads2
Safetouch Keypads1
Supervisors1
Radio Receivers1
PAL/IP Image Conversion Modules2
Managed Cameras16

Expansion Modules (Plug-in)

Electrical Characteristics

FeatureSpecification
Supply Voltage100–240 V
Current Supplied by Control Unit Power Supply1500 mA (1.5A)
Auxiliary Power Outputs on Board2
Battery Type12V / 7Ah

Accessories

VEDOVOICE

Voice message expansion card for VEDO control panels. Adds voice guidance for remote control management and audio messaging (alarm and technical messages). EN50131 Grade 2.

VEDORF

RTX Radio Module, Plastic Case, Series C. Radio transceiver module for VEDO series control panels. Allows use of up to 32 sensors, 8 sirens, and 32 radio remotes. Manages bidirectional communication with FSK modulation at 868 MHz, controls radio module status and battery level. Housed in a white RAL9003 flame-retardant plastic enclosure with anti-opening and anti-tamper protection. Can be housed within BOXPLASTIC, BOXMETAL, and BOXFLUSH enclosures. Dimensions (L x H x P): 126 x 80 x 32 mm. EN50131 Grade 2.

VEDOPROX

Proximity Reader for VEDO Control Panels. Connects to the BUS. Equipped with a 4-color LED indicator (red, green, yellow, blue) for system status visualization. To be used with SK9050 articles, installable on all civil series using the Standard Keystone RJ45 cover. Dimensions: 50x45x12.5 mm.

VEDOISO

Bus Isolator Module, Plastic Case. Isolator module for VEDO series control panels. Provides protection against faults and tampering. EN50131 Grade 2.

VEDOIP

IP Communication Card for VEDO Control Panels. Ethernet network expansion card for VEDO series control panels. Thanks to the integrated web server, it allows remote interaction with the control panel (arming, disarming, area control, and system configuration), management of video images (paired with VEDOCCTV), and firmware updates for the control panel, keypads, proximity readers, and input/output modules. EN50131 Grade 2.

VEDOGSM

GSM Communicator Card for VEDO Control Panels. GSM communicator expansion card for VEDO series control panels. Allows sending telephone calls, SMS, MMS, and emails over the data network. When paired with the VEDOVOICE voice message card, it enables remote control panel management via SMS and voice communicator. Certified EN50131 Grade 2.

VEDOCCTV

Hybrid CCTV Module. Module that allows modulation and transmission of video signals from up to 8 cameras (4 analog and 4 IP cameras) for VEDO series control panels. To be paired with VEDOIP. Dimensions: 60x85x35 mm (4 DIN modules).

VEDO8I8O

8 IN/8 OUT Logic Module, Plastic Case. Expansion for VEDO series control panels, 8 inputs, freely configurable as NC, NO, single, double, triple balance, and double, or 8 open collector outputs (100 mA max). Housed in a white RAL9003 flame-retardant plastic enclosure with anti-opening and anti-tamper protection. Can also be housed within BOXPLASTIC, BOXMETAL, and BOXFLUSH enclosures. Dimensions (L x H x P): 126 x 80 x 32 mm. EN50131 Grade 2.

PSU15

Switching Open Frame Power Supply 14VDC/1.5A. Open Frame switching power supply, PB battery charger, input 90-260 VAC / 50-60 Hz, output 13.8 VDC / 1.5 A. Dimensions (L x H x P): 110 x 33 x 80 mm. Certified EN50131-6 Grade 2.

BOXPLASTIC

Plastic Wall Enclosure for VEDO Control Panels. Wall-mount enclosure in flame-retardant ABS for VEDO series control panel boards art. PCBVEDO10, PCBVEDO34, and PCBVEDO68. White RAL 9003 color. Features housing for a 7 Ah battery, the PSU15 power supply, and up to 2 bus expansion cards. Dimensions (L x H x P): 280 x 260 x 80 mm. EN50131 Grade 2.

PDF preview unavailable. Download the PDF instead.

Comelit VEDO10 IT dompdf CPDF

Related Documents

Preview Comelit Safe Manager 2.13: Manuale di Programmazione Centrali Vedo
Guida completa alla programmazione del software Comelit Safe Manager versione 2.13 per le centrali di allarme serie Vedo, coprendo installazione, configurazione, gestione dispositivi e funzionalità avanzate.
Preview Comelit 8461V Technical Manual: Installation and Operation Guide
Comprehensive technical manual for the Comelit 8461V single-family door entry kit. Covers installation, configuration, operation, and wiring diagrams for the Comelit Quadra series video intercom system.
Preview Comelit Home Automation General Catalogue
Comelit's General Catalogue for Home Automation, featuring integrated systems for smart living, climate management, lighting control, intruder alarms, voice assistants, and more. Explore solutions for apartments and detached houses.
Preview Manuale Tecnico Lettore RFID Comelit Vedo Vedoproxa
Specifiche tecniche dettagliate, guida all'installazione e configurazione per il lettore RFID Comelit Vedo Vedoproxa, coprendo impostazioni DIP switch, indicatori LED, velocità di comunicazione e indirizzamento.
Preview Comelit VEDOGSM GSM Communication Card Technical Manual
Technical manual for the Comelit VEDOGSM GSM communication expansion module, detailing features, compatibility, technical specifications, installation, and SIM card fitting for Vedo Control Panels.
Preview Comelit MiniTouch User Manual: Smart Home Automation Guide
Comprehensive user manual for the Comelit MiniTouch smart home control system, detailing setup, operation of lights, climate, alarms, and more for efficient home automation.
Preview Comelit SecurHub Cloud Next Migration Guide
Step-by-step guide for migrating Comelit SecurHub from firmware version 1.1.x to 1.2.y, including project conversion and account migration procedures.
Preview Comelit App User Manual: Smart Registration, Configuration, and Features
A comprehensive guide to the Comelit application, covering smart registration, manual configuration, user administration, advanced settings, and specific functions for the Comelit 6741W monitor. Learn to manage your door entry system, messages, and actuators.