Draper 85L Plastic Wheelbarrow: Assembly and Usage Instructions

Important Safety Information

Please read these instructions carefully to ensure the safe and effective use of this product.

Product Overview and Scope

This wheelbarrow is intended for domestic and commercial duties. It must not be used to transport or store hot ashes or chemicals that may cause damage to the pan.

Parts Identification

The wheelbarrow is supplied with the following components:

• A: Plastic Pan - The main container for carrying materials.
• B: Handles - Two metal bars with grips for steering and maneuvering the wheelbarrow.
• C: Support Brackets - Metal pieces used to reinforce the connection between the pan and the frame.
• D: Front Frame - The main structural frame that includes the axle for the wheel.
• E: Rear Frame/Support - A metal piece connecting the handles to the main frame.
• F: Wheel - The wheel assembly, consisting of a tire and rim.
• G, H, I: Fasteners - Sets of bolts, nuts, and washers used for assembly.

Assembly Instructions

1. Step 1: Frame and Handle Assembly

   Begin by attaching the front frame (D) to the underside of the plastic pan (A). Next, connect the handles (B) to the rear of the pan and the frame. Use the provided fasteners (G, H, I), including bolts, nuts, and washers, to securely fasten these components.

2. Step 2: Wheel Attachment

   Attach the wheel (F) to the axle located on the front frame (D). Secure the wheel using the appropriate fasteners (G), ensuring it spins freely.

Contact and Support Information

For aftersales servicing or warranty repairs, please contact Draper Tools Limited.

• Helpline: (023) 8049 4344
• Sales Desk: (023) 8049 4333
• General Enquiries: (023) 8026 6355

For details of a service or warranty repair agent in your local area, please contact the Draper Tools Helpline.