Introduction
This manual provides detailed instructions for the Anker SOLIX C300X DC Portable Power Station. Learn about its features, how to set it up, charge it using various methods (solar, USB-C, car), operate its functions, and understand the LCD screen guide. It also includes a FAQ section and specifications for the device.
What's in the Box
- Anker SOLIX C300X DC Portable Power Station
- USB-C to USB-C Charging Cable (140W)
- Important Safety Instructions
General Overview
The Anker SOLIX C300X DC Portable Power Station features a retractable light, LCD screen, IOT button, main power button, various USB-A and USB-C output ports, solar and car input, a handle, and a reset button. It also includes a car power outlet and a button for its on/off function.
Charging Your Power Station
- Solar Charging: Charge using Anker 100W or 60W solar panels with a solar charging cable (sold separately). Ensure the solar panel voltage is between 11V-28V.
- USB-C Charging: Recharge using a wall adapter and a USB-C cable. Two 140W USB-C ports can be used simultaneously. A 140W USB-C cable and adapter are recommended for optimal charging.
- Car Charging: Recharge using a car charging cable (sold separately) connected to your car's output port.
Powering Your Device
Press and hold the main power button for 3 seconds to turn the power station on or off. The LCD screen will indicate when it's ready to charge devices. The power station will automatically turn off after 2 hours of inactivity or if output ports are off and no load is detected.
USB Charging
Connect your devices to the USB ports. Note that USB-C2 and USB-C3 ports are classified as PS3. Ensure connected equipment complies with relevant safety standards and use a 5A USB-C cable for maximum power output.
Light Function
Pull up the retractable light. Press the button to cycle through different brightness levels (x1, x2, x3).
LCD Screen Guide
The LCD screen displays battery status, output wattage, input wattage, estimated recharge time, and estimated battery depletion time. Various icons indicate Bluetooth/Wi-Fi status, low temperature, overload, and high temperature warnings.
Anker App for Smart Control
Download the Anker app from the App Store or Google Play to remotely control your power station. Connect your device to a network before first use. Firmware updates will be notified via the app; ensure the power station is connected to AC power and Wi-Fi during updates.
FAQ
- CPAP Compatibility: Yes, the Anker SOLIX C300X DC Portable Power Station can power a CPAP machine.
- Solar Charging: Use an 11-28V solar charger with an XT60 connector. The Anker 100W/60W solar panel is recommended.
- USB-C Ports: USB-C1 and USB-C4 are output only. USB-C2 and USB-C3 support both output and input.
- Resetting the Power Station: Insert a paperclip into the reset hole for 1 second for a factory reset. Contact support@anker.com if issues persist.
- Storage and Maintenance: Store in a cool, dry environment. Check battery level weekly and recharge if below 30%. Recharge to 100% every 3 months.
- Orientation: The power station should be used and stored in a vertical position.
- First Use: Recharge the power station before first use to activate the unit.
Specifications
Feature | Specification |
---|---|
Cell Capacity | 288Wh |
Solar Panel Input | 11-28V--8.2A Max (100W Max) |
USB-C2 Input | 9V-=3A / 15V=3A / 20V=5A / 28V=5A (140W Max) |
USB-C3 Input | 9V-3A/15V=3A/20V=5A/28V=5A (140W Max) |
Car Charger Output | 12V-10A |
USB-A Output | 5V-2.4A (12W) |
USB-C1 Output | 5V=3A/9V=3A/15V=3A/20V=5A (100W Max) |
USB-C2 Output | 5V=3A/9V=3A / 15V=3A / 20V=5A / 28V=5A (140W Max) |
USB-C3 Output | 5V=3A/9V-=3A/15V=3A / 20V=5A / 28V=5A (140W Max) |
USB-C4 Output | 5V-3A (15W Max) |
Total USB-A and USB-C4 Output | 5V=4A (20W) |
Total Output | 300W |
Discharge Temperature | -20°C-40°C / -4°F-104°F |
Charging Temperature | 0°C-40°C/32°F-104°F |
Dimensions | 12.4×12.0×20.0 cm / 4.88×4.72×7.87 in |
Net Weight | 2.8 kg / 6.17 lb |
USB Power Distribution Table
The total power for USB-A1, USB-A2, and USB-C4 is 20W. The table below treats them as a single interface (USB-A1&A2&C4). The total power of this product is 300W. Please be mindful when using multiple interfaces.
Ports | Power Distribution |
---|---|
1 Port | USB-A1/A2: 12W USB-C4: 15W USB-C1: 100W USB-C2/C3: 140W Car Charger Output: 120W |
2 Ports | USB-C1 + USB-A1&A2&C4: 100W+20W USB-C2/C3 + USB-A1&A2&C4: 140W+20W USB-C1 + Car Charger Output: 100W+120W USB-C2/C3 + Car Charger Output: 140W+120W USB-C2/C3 + USB-C1: 140W+100W USB-C2 + USB-C3: 140W+140W |
3 Ports | USB-C1 + USB-C2/C3 + USB-A1&A2&C4: 100W+140W+20W USB-C2 + USB-C3 + USB-A1&A2&C4: 140W+140W+20W USB-C1 + USB-C2/C3 + Car Charger Output: 100W+100W+120W USB-C2 + USB-C3 + Car Charger Output: 140W+60W+120W USB-C1/C2/C3 + USB-A1&A2&C4 + Car Charger Output: 100W/140W/140W + 20W + 120W USB-C1 + USB-C2 +USB-C3: 30W+100W+140W |
4 Ports | USB-C1 + USB-C2/C3 + USB-A1&A2&C4 + Car Charger Output: 30W+100W+20W+120W USB-C2 + USB-C3 + USB-A1&A2&C4 + Car Charger Output: 30W+100W+20W+120W USB-C1 + USB-C2 + USB-C3 + USB-A1&A2&C4: 30W + 100W + 140W + 20W |
5 Ports | USB-C1 + USB-C2 + USB-C3 + Car Charger Output: 30W + 30W + 100W + 120W USB-C1 + USB-C2 + USB-C3 + USB-A1&A2&C4 + Car Charger Output: 30W+60W+60W+20W+120W |
Customer Service
For frequently asked questions and more information, visit www.eastcom.ro. Contact them at 0376.448.990 or contact@eastcom.ro. East Com Trading is located at Strada Ciobanului nr 59, C3/1, Business Park Recon Mogosoaia 2, Mogosoaia, Ilfov, open Monday to Friday, 9:00-16:00. Find them on Facebook at eastcom.ro and Instagram at eastcom_ro.
Declaration of Conformity
This section details the manufacturer (Anker Innovations Limited), EU and UK importers, product name (Anker SOLIX C300X DC Portable Power Station), brand (Anker), and model number (A178). It declares that the product complies with various EU directives and recognized standards, including those related to electromagnetic compatibility, safety, and the restriction of hazardous substances.