PETLIBRO PLAF102 Automatic Pet Feeder User Manual

Safety Precautions

Warning

• Dispose of all packaging materials properly. Some items may be packed in polybags; these bags could cause suffocation; keep away from children and pets.
• Do NOT allow small children to play with, in or around the pet feeder.
• To reduce the risk of injury, please keep close supervision when an appliance is used near children.
• Do NOT use the feeder with pets not able to reach the food tray or with any physical disability.
• Do NOT immerse the base part in water at any time as it may damage electronic components like the control panel.
• Do NOT place any foreign object in the pet feeder.
• Do NOT use outdoors. Check operation frequently to be sure the unit is dispensing properly.
• Do NOT use wet, canned or moist food.
• Do NOT disassemble the unit other than as instructed in this User Guide.
• Do NOT use the feeder for anything other than its intended use.
• Only use attachments recommended or sold by the manufacturer. The use of attachments not recommended or sold by the manufacturer may cause an unsafe condition. Do not modify the pet feeder.
• Do not operate any appliance if the unit is malfunctioning or has been damaged. Do not attempt repairs on the pet feeder yourself. Contact customer service immediately for further instructions.
• Always unplug when not in use and before cleaning.
• Never pull on the electrical power cord to remove the plug from the wall outlet.
• If the plug of this device gets wet, turn on electricity to that wall outlet. Do not attempt to unplug.
• Examine the feeder after installation. Do not plug in if there is water on the power cord or plug.
• To avoid tripping, always position power cord out of the way of foot traffic.

Caution

• Do NOT allow pets to chew on or swallow any parts.
• If an extension cord is necessary, one unit with a proper rating should be used.
• Do NOT install or store the pet feeder where it will be exposed to weather or temperatures below -20°C / -4°F.
• Use alkaline D batteries to power. Do NOT use rechargeable batteries.
• Check the batteries regularly. Before leaving for extended time, always replace batteries with new ones.
• Do NOT lift the pet feeder by lid, food tank, or food tray. Lift and carry it using both hands and the base, while keeping the unit in an upright position.
• Suitable for dry food ONLY, with kibble size ranging from 2-10mm / 0.07-0.4in in diameter. Larger kibble may get stuck at the food outlet.
• Read and observe all important notices listed on the pet feeder and in the packaging.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement: To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from your body.

Warranty

• 1-year warranty
• Lifetime support

For guidance on product use and warranty extension, please contact PETLIBRO after-sales staff via email: support@petlibro.com

If any questions related to orders, please contact the seller through the shopping platform.

Product Diagram

Front View

1. Desiccant Carrier

2. Lid

3. Lid Grip

4. Food Tank Buckle

5. Base

6. Food Outlet

7. Food Tray

8. Control Panel

9. Food Tank

Bottom View

10. Battery Compartment

11. Speaker

12. Power Socket

Control Panel Overview

The control panel features:

• LED Indicator
• Mic [Microphone]
• LED Indicator
• Record Button [Record Button]
• Reset Button [Reset Button]
• Feed Button [Feed Button]

LED Indicators

Controlling via App

1. System Requirements

• iPhone on iOS 9.0 or later; smartphone on Android 4.4 or later
• Wireless router 2.4GHz (802.11b/g/n)
• High-speed internet connection

2. Before the Configuration

• Please use indoors only to avoid direct exposure to the sunlight.
• Please connect the Feeder via 2.4GHz only. If your WiFi is 5GHz only, set it to be compatible with 2.4GHz mode.
• The WiFi password is composed of no more than 12 digits and letters. No special symbols are supported.
• Please keep the feeder close to the router. The distance in a range of 6 meters without wall barriers is recommended.
• If the configuration fails, please power off and restart the feeder (press and hold the Reset button for 6s), then wait for about 2mins to re-configuration.

3. How the System Works

The PETLIBRO WiFi automatic feeder connects to your home's wireless router and allows you to program and monitor your pet's meals from anywhere, right from your smartphone with the Smart Life app. Use the app to schedule your pet's meal times and portion sizes, view the last 7 days of feeder activity, and even dispense a meal remotely. Smartphone alerts let you know when your pet has been fed for added peace of mind. Delivering a convenient lifestyle to you and helping your pets become their best, the PETLIBRO WiFi automatic feeder keeps you connected to your pet's feeding routine wherever you are!

4. Download the App & Log In

• Scan the QR code or search for "PETLIBRO LITE” on App Store or Google Play to download the app.
• Sign up or Log in to your account.

5. Two Ways to Connect Your Feeder with App

A. Configuring via Bluetooth Mode

1. Open the App, select Home page, tap "Add Device" or "+" in the upper right corner.
2. Choose PLAF102 WiFi Feeder.
3. Follow the instructions on the screen, and confirm the WiFi indicator on the feeder is flashing. Check by following the steps shown on the screen:
   • Select 'Bluetooth' on the top right corner.
   • Turn on the Bluetooth on your phone.
   • Check if the indicator flashes (once every 0.5s).
   • Click Next after checking.
   Note: If the indicator doesn't flash (once every 0.5s), click Reset Device Step by Step and complete the steps.
4. Add the device PLAF102 by entering WiFi account and password. Note: Only connect to 2.4G network.
5. Feeder connected, start to set the feeding time and portions, record meal call, and set the times the meal call play.

B. Add the Feeder in AP Mode

1. Turn off the Bluetooth on your phone.
2. Open the App, tap "Add Device" or "+" in the upper right corner, choose PLAF102 WiFi Feeder, tap the icon at the top right corner and choose AP mode.
3. Confirm the WiFi indicator on the feeder is flashing. Check by following the steps shown on the screen:
   • Make sure your phone's Bluetooth is off.
   • Check if the indicator slowly blinks (once every 2-3s).
   • Click Next after checking.
   Note: If the indicator doesn't slowly blink (once every 2-3s), click Reset Device Step by Step and complete the steps.
4. Enter your WiFi account and password, and go to the WiFi connection interface on your phone, find the device "SL-PETLIBRO-xxxx" and tap to connect. Note: Only connect to 2.4G network.
5. Back to the App and wait for connecting.
6. Feeder connected, start to set the meal time and portion size, record meal call, and set the times the meal call play.

Manually Feeding the Pet

On Manual page, choose the portion you want to feed first, then tap the Feed icon. The feeder will feed immediately.

Set Meal Plan

On Schedule page, tap the Add icon, choose feeding time, feeding days, and feeding portions.

Reference for Portion Setting

Note: The table above shows reference values. The actual portion size may vary slightly.

Important Notes:

• It is normal to hear clicks before food is dispensed.
• One or two kibbles may be left at the chute after feeding, and it may come out of the outlet when the machine is moved (doesn't indicate a faulty equipment).
• Refer to the instructions on your pet food packaging for detailed feeding instruction.
• Please double-check the current time after setting.

View the Logs and Share

View the Logs

On Log page, you can view the feeding records.

7. Share Your Feeder

Enter Setting, select Share Device, add Sharing Via Smart Life Account Name.

Set Up the Feeder

Warning: Please use the original 5V power supply.

1. Assembling Food Tray

• Place the feeder in a desired location. Check the food tank is in place.
• Align the bulging of the food tray and holes in the base, and push upward to connect the two.

Note: Before moving the feeder, please empty the tray, press it down to remove from the base. Hold the base instead of any other parts when lifting the feeder.

2. Connecting Power

• Insert the 5V power adapter into a wall socket. Plug in the power socket of the feeder.
• Open the battery compartment at the bottom of the unit, and install 3 alkaline D batteries (not included) in case of outage.
• The LCD display will light up automatically indicating the feeder is on now.

3. Placing Desiccant bag

The PETLIBRO desiccant bag can remove the moisture and odor inside the tank, protect the pet food from oxidation damage, and always be fresh.

Notes:

• It's recommended to use a desiccant bag and change them every 15 days in case of mold.
• Please remove the desiccant bag before cleaning the lid.
• For a better antioxidant effect, tear off the sealing film outside the small package only when you use it.

4. Filling Food Tank

• Fill food tank with dry pet food. Close the lid and it will snap into place due to gravity.

Notes:

• Do NOT use canned, wet or moist pet food.
• Recommend kibble size ranging from 2-10mm / 0.07-0.4in in diameter.

5. Recording a Meal Call

• Press and hold the Record button, start recording after a beep is heard.
• Record your voice for less than 10s. Release the button, 2 beeps will be heard indicating it's saved.

Note: When feeding time is up, the recording will be played when food is dispensing.

Cleaning & Care

It's recommended to clean the feeder regularly for the health of your pet.

The washable parts of the PETLIBRO auto feeder are as follows: food tank, food tray, and lid (without desiccant bag); they can be submerged in water. Clean by hand-washing using cool or warm soapy water.

Disassembling the food tank

If you have food inside the tank or chute, press the unlocked button and feed button for a few times to empty first.

Press the food tank buckles with your thumbs, push the tank upward to disassemble.

Disassembling the food tray

Empty the tray, press it down to remove from the base. Rinse and let all parts air dry completely before assembling.

Note: Be careful not to hurt your fingers when disassembling the food tank by great strength.

In The Box

• 1 x WiFi Automatic Pet Feeder
• 1 x 5V Power Adapter
• 1 x Desiccant Bag
• 1 x User Guide Kit

Specifications

Troubleshooting