PETLIBRO AIR Automatic Pet Feeder User Manual
Product Information
Model: PLAF008
Manufacturer: Shenzhen Libro Technology Co., Ltd.
JP Importer: 株式会社成洋
Made in: China
Version: PLAF008_V3.0
In the Box
- Automatic Pet Feeder (x1)
- Stainless Steel Bowl (x1)
- Bowl Tray (x1)
- Quick Start Guide (x1)
- User Manual (x1)
- Power Adapter (x1)
- Power Cable (x1)
Product Overview
The PETLIBRO AIR Automatic Pet Feeder is designed for convenient and controlled feeding of pets.
Key Components:
- Lid Release Button
- Lid
- Desiccant Bag Holder Lid
- Food Tank
- Tank Base
- Rotor
- LCD Display
- Buttons
- Food Tank Lock
- Control Panel Cover
- Food Outlet
- Stainless Steel Bowl
- Bowl Tray
- Power Cable Slot
- USB-C Power Port
- Battery Compartment
- Non-slip Rubber Pad
- Battery Compartment Cover
Diagram Description: The feeder consists of a main cylindrical food tank with a lid, a base unit containing the dispensing mechanism and controls, and a removable stainless steel bowl placed in a tray at the front. The base unit has various ports and a control panel.
Buttons and LCD Display
Buttons:
- [Manual]: Press once to dispense one portion of food. Can be pressed up to five times rapidly.
- [Back/Home]: Press to return to the previous setting. Press and hold for three seconds to go to the main interface.
- [Set]: Press to confirm a setting and move to the next step. If no button is pressed, settings may not be saved.
- [Up/Down]: Press to select a setting or increase/decrease a value. Press and hold for quick adjustments.
LCD Display Indicators:
- Battery Status: Lights up when batteries are installed. A blank indicator signifies low battery level.
- Food Level: Lights up when the food storage level is low (less than 10% of total capacity).
- Rotor Status: Lights up when the rotor is stuck.
Getting Started: Installation
- Press the lid release button and remove the lid.
- Add dry pet food to the food tank. Ensure the food is dry and kibble size is between 2-15mm (0.07-0.6in).
- Replace the lid and press the lid release button to secure it.
- Install the stainless steel bowl into the bowl tray, and then place the tray onto the feeder base.
Tip for Desiccant Bag: To keep food fresh, turn the desiccant bag holder lid counterclockwise, place a desiccant bag (size: 35*20mm / 1.4*0.79in) into one of the designated holes, then replace the holder lid and turn it clockwise to secure.
Powering the Feeder
The feeder supports dual power modes:
- Using Power Adapter and Cable: Connect the feeder to a wall outlet. The feeder will automatically turn on, and the LCD display will illuminate in white.
- Using Battery Power: Install three D alkaline batteries into the battery compartment. The feeder will automatically turn on.
Notes:
- Press any button to wake the display from sleep.
- The LCD display does not remain on when using battery or adapter power alone.
- A battery status indicator appears on the display when batteries are installed.
- When both the power adapter and batteries are used, the feeder draws power from the adapter.
Power Off: Unplug the power adapter to turn off the feeder. In battery mode, remove the batteries.
Time Settings
- After powering on, press the top of the control panel cover to open it. Press the [Set] button to enter time settings.
- Press the [Set] button again; the hour digit will flash.
- Press and hold the [Set] button to set the hour, then press the [Manual] button to confirm.
- Use the [Up/Down] buttons to set the minute and select between "AM" or "PM".
- Press the [Set] button to confirm the time.
Example: Setting the time to 08:00 AM.
Meal Settings
After setting the time, press the [Set] button to enter Meal 1 settings.
- Use the [Up/Down] buttons to set the hour and minute, select "AM" or "PM", and set the desired number of portions for Meal 1.
- Press the [Set] button to confirm Meal 1 settings.
- The feeder will return to the main interface. Press the [Set] button; the meal number "2" will flash. Press [Set] again to enter Meal 2 settings.
- Repeat this process for Meals 3 through 6. If you wish to set fewer than 6 meals, use the [Manual] button when a meal number flashes to skip it or customize specific meals.
- After completing meal settings, replace the cover and ensure it is securely in place.
Notes:
- The maximum number of portions per meal is 16.
- Ensure the portion count is not set to 0 and press [Set] to confirm each meal setting. Successfully set meals will be displayed on the screen.
Example: Setting Meal 1 to 07:30 AM with a certain number of portions.
Recommended Feeding Portions
| Model | Daily Intake | Meals per Day | Portions per Meal | Per Portion |
|---|---|---|---|---|
| PLAF008 | 1/3 cup | 3 | 3, 3, 2 | |
| 4 | 4, 2 | |||
| 1/2 cup | 3 | 4 | ||
| 4 | 3 | |||
| 2 | 8 | |||
| 2/3 cup | 3 | 5, 5, 6 | ||
| 4 | 4 | |||
| 2 | 9 | |||
| 3/4 cup | 3 | 6 | ||
| 4 | 4 | |||
| 9/10 cup | 2 | 11 | 1/24 cup (10.4ml) | |
| 3 | 7, 7, 8 | |||
| 4 | 5, 5, 6, 6 | |||
| 2 | 12 | |||
| 1 cup | 3 | 8 | ||
| 4 | 6 | |||
| 2 | 15 | |||
| 1 1/4 cup | 3 | 10 | ||
| 4 | 7, 7, 8, 8 | |||
| 1 1/2 cup | 3 | 12 | ||
| 4 | 9 | |||
| 1 1/3 cup | 2 | 16 | ||
| 3 | 10, 11, 11 | |||
| 4 | 8 | |||
| 1 2/3 cup | 3 | 13, 13, 14 | ||
| 4 | 10 |
Reset and Manual Feeding
Reset:
Press and hold the [Up] and [Down] buttons for three seconds to reset the feeder to factory settings.
Manual Feeding:
When the feeder is powered on, press the [Manual] button once to dispense one portion of food. You can press the [Manual] button up to five times to dispense five portions.
Indicator Status
| Indicator | Status |
|---|---|
| White on | Normal |
| Red flashes once every second with blank battery status indicator | Low battery warning |
| Red flashes once every second with "LOWFOOD" indicator | Low food storage level (less than 10% of total capacity) |
| Red flashes once every second with "STUCK" indicator | The rotor is stuck |
Disassemble for Cleaning
- Pull the food tank locks outwards to release the tank.
- Lift the food tank cover upwards.
- Hold the tank base, turn the rotor clockwise, and lift the rotor out.
- Clean the food bowl and rotor with water and allow them to air dry completely.
Care and Maintenance
- Power off the device before cleaning.
- Clean the food bowl with tap water. The stainless steel bowl is dishwasher safe.
- Do not clean the main feeder body in a dishwasher.
- Use a soft damp cloth to clean the feeder base. Avoid washing parts with electronic components.
- Replace the desiccant bag every half a month to maintain food freshness.
Troubleshooting
- Blank Battery Indicator: Replace the batteries.
- "LOWFOOD" Indicator: Refill the food tank.
- "STUCK" Indicator: Disassemble the tank base and remove any food obstructing the rotor.
- Feeder Not Dispensing Food: Ensure the food tank is sufficiently filled.
- Feeder Won't Turn On: Check that the power adapter, power cable, and batteries are correctly installed.
- Food Size: Ensure food kibble size is between 2-15mm (0.07-0.6in) in diameter. Larger kibble may cause blockages.
- Food Won't Come Out: Remove the food tank and base, and check the food chute for blockages. Also, verify battery level, power adapter connection, and check for power outages if using adapter power without batteries.
- Portion Variation: The first few portions may vary slightly. Consistency should improve after approximately 6 feedings.
Specifications
| Model | PLAF008 |
|---|---|
| Input | AC 100-240V 50/60Hz |
| Capacity | 2L |
| Battery Power Option | 3 x D alkaline batteries |
| Dimensions | 310 x 265 x 180mm / 12.2 × 10.4 × 7.1in |
| Weight | 1.32kg / 2.91lb |
Safety Instructions
- Dispose of all packaging materials properly. Keep plastic bags away from children and pets to prevent suffocation.
- Do not use the feeder with pets that cannot reach the food tray or have physical disabilities.
- Never immerse the base part in water, as it may damage electronic components.
- Do not use the feeder outdoors. Regularly check its operation to ensure proper dispensing.
- Use only dry pet food. Do not use wet, canned, or moist food.
- Do not disassemble the feeder except as instructed in this manual.
- Use only accessories recommended or sold by the manufacturer. Unauthorized accessories may cause unsafe conditions.
- Do not modify the pet feeder.
- After installation, examine the feeder. Do not plug it in if the power cable or plug is wet.
- Position the power cable to avoid tripping hazards.
- Do not install or store the feeder where it may be exposed to temperatures below 4°C (39.2°F) or extreme weather.
- Use D alkaline batteries; do not use rechargeable batteries.
- Check batteries regularly. Replace with new batteries before leaving for extended periods.
- Lift and carry the feeder using both hands on the base, keeping it upright. Do not lift by the lid, food tank, or food bowl.
- Ensure kibble size is within 2-15mm (0.07-0.6in) diameter for proper dispensing.
- Do not place fingers into the food outlet or touch the rotor.
- Power off the device when it is not in use.
Warranty
- 12-month warranty.
- For guidance on product use, contact the customer service team via email at support@petlibro.com.
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Radio Frequency Exposure Statement
To maintain compliance with the FCC's RF Exposure Guidelines, this equipment should be installed and operated with a minimum distance of 20cm from your body.
