Hompany SmartVac 11 Quick Start Guide

SmartVac 11 Cordless Vacuum Cleaner

This guide provides instructions for setting up and using your Hompany SmartVac 11.

Installing Desired Cleaning Accessory

To attach accessories, align the accessory with the main unit and push until it clicks into place. To detach, press the release button and pull.

Diagrams show how to connect various accessories to the main body of the vacuum cleaner, with indicators for clicking into place.

Power mode and speed switch

The vacuum cleaner has multiple power modes. The display shows the current mode and battery level.

• Boot into "MID" Mode.
• Touch the "UP" key to set to "MAX" Mode.
• Touch the "UP" key again to switch to "MIN" Mode.

Diagrams illustrate the ON/OFF button and the switch button on the handle, along with a digital display showing battery percentage and mode (MIN, MID, MAX).

Recharging

Recharging on the storage wall-mount

Attach the vacuum cleaner to the wall-mount for charging. Ensure the charging contacts are aligned.

Charging separately

The battery can be removed and charged separately using the provided charger.

Power display

The display shows the charging status and battery percentage: "Fully charged", "Charging from low", and "Charging, medium charge".

Empty the dust bin

Follow these steps to empty the dust bin:

1. Press the release button to detach the dust bin.
2. Open the dust bin lid and empty the contents.
3. Close the dust bin lid securely.

Diagrams illustrate the process of detaching, opening, and emptying the dust bin.

Clean the Electric Floor Brush

Regularly clean the electric floor brush to maintain performance.

• Remove the brush head from the main unit.
• Use a tool to remove tangled hair or debris from the brush.
• The brush can be rinsed with cold water.
• Allow the brush to air dry completely for at least 24 hours before reattaching.

Diagrams show the process of detaching the brush, cleaning it with a tool, rinsing it, and drying it under a sun symbol with a 24H indicator.

Dust Cup Cleaning

IMPORTANT! Wash filters with cold water at least every month. Ensure the filters are completely dry before refitting.

• Remove the dust cup and filters.
• Wash the filters with cold water.
• Allow the filters to air dry completely for at least 24 hours.
• Reassemble the dust cup and filters once dry.

Diagrams illustrate the removal of filters, washing them, drying them (with sun and 24H symbols), and reassembly, with warnings against using damaged filters or refitting wet filters.

Remove the Dust Cup

To remove the dust cup, press the release button and pull the cup away from the main unit. The components can be detached for cleaning.

Diagrams show the dust cup being detached and then disassembled into its main parts.

Prohibited operations

• Do not use SmartVac 11 near open flames.
• Do not store SmartVac 11 near heat sources.
• Do not put your hands near the brush bar when SmartVac 11 is running.
• Not applicable for picking up liquids.
• Not applicable for picking up burning objects.

Hompany Support Team

For any questions or assistance:

• EN: support@hompany.top
• EU: service@hompany.top

We are always here to help you for any questions.