RV Wi-Fi DishyDock Router User Guide

What makes up your RV Wi-Fi Dishy Dock Router

Congratulations on your purchase of an RV Wi-Fi Router. The RV WIFI DishyDock Router is the third kit in the Starlink Integration System. It works alongside the DishyDocks to connect Dishy to your RV and DishyDock Power, which converts your Starlink system to 12 volts. Our superior WIFI range is what makes RV WIFI routers the simple choice in RV routers.

Components:

• RV WIFI DishyDock Router: The central unit with Wi-Fi antennas and ports.
• WIFI Antenna's: Connectors for Wi-Fi signal enhancement.
• Mounting Bracket: Hardware for securing the unit.
• Ethernet Cable: For connecting the router to other components.
• 12V Power Cable: To power the unit from a 12-volt source.

Other kits available in the DishyDock system

Kit 1. DishyDock Ports (enclosed setup)

Connects your Starlink Dishy to your caravan or RV with ease. Includes: 2 x DishyDock Ports, 1 x 5m AWG23 Shielded Ethernet Cable.

Kit 1a. DishyDock Ports (external setup)

Connects your Starlink Dishy to your caravan or RV with ease. It can be used in an external set up. Includes: 1x DishyDock Waterproof Port.

Kit 2. DishyDock Power

Converts your Starlink System to 12volt operations. Includes: 1 x DishyDock Power Unit, 1 x 300mm AWG23 Shielded Ethernet Cable, 1 x Starlink adapter (for Version 2 Dishy's).

Kit 3. RV WIFI5G Router (upgrade to DishyDock Router)

Upgrade for perfect integration. Provides 5G access during traveling when Starlink is not operational. Includes: 5G router, antennas, 300mm AWG23 Shielded Ethernet Cable, brackets, 12 volt power supply and SIM starter kit.

Installing your RV Wi-Fi DishyDock Router

1. Position your router next to the internal DishyDock Port, DishyDock Power, and a double 12-volt power socket. Screw the 4 x Wi-Fi antenna's into the Wi-Fi ports on the control Panel. (Note: The top and bottom ports are for the upgradable RV WIFI 5G router.)
2. IMPORTANT: Plug the ethernet cable labelled 'BLUE-WAN PORT' into the BLUE WAN PORT on the side panel of the router. DO NOT plug this cable into the YELLOW LAN PORTS of the router.
3. Insert the opposite end of the ethernet cable into RV WIFI DishyDock Power, into the port labelled 'DishyDock Router'.
4. Insert the 12-volt power adapter into the power jack on the side panel of the RV Wi-Fi DishyDock Router.
5. Insert the power cord into a 12v power point and turn on.
6. Note: This unit is not to be hardwired unless discussed with an RV WIFI representative first.

Turning on your RV Wi-Fi DishyDock Router

1. Place the end of the power adapter into the 'Power' slot.

Connecting your DishyDock System together

1. Position your Dishy as requested in the Starlink User guide. Plug the Dishy Cable into the DishyDock. For version 2 Dishy's, you will require the adapter.
2. Position the four parts of the DishyDock System together in an accessible location inside your Caravan/RV. Note: must be at least 1.5m from solar inverter.
3. Insert one end of the 300mm ethernet cable (DD Port/DD Power) into: 1. The DishyDock Port. 2. DishyDock Power RJ45 port labelled 'Dishy'.
4. Insert the 12v power plug into one of the 12-volt wall sockets.
5. Insert the second 300mm ethernet cable (DD router/Blue WAN Port) into: 1. DishDock Power RJ45 port labelled 'DishyDock Router'. 2. Blue WAN port of Router. Note: DO NOT USE YELLOW LAN PORTS.
6. Insert the 12-volt power adapter into the Router.
7. Insert the 12-volt power adapter into the second power socket and turn the system on.

Connecting your device via Wi-Fi to your RV Wi-Fi DishyDock Router

1. Turn on the device/s (phone/laptop etc.) that you wish to connect to the internet.
2. Click on: 'Settings' ⚙️ or equivalent page on your device.
3. Click on: 'Wi-Fi' ? and choose the RV Wi-Fi network. On some devices, you will notice that RV Wi-Fi comes up twice with the same series of letters and numbers, but 5.8 included. This is because newer devices recognize the faster 5.8 Wi-Fi as well as the standard 2.4. Click on the 5.8 option if available. You will need to set passwords for both versions if available. This is simply completing the process for one, then repeating it again for the other.
4. You will be asked for the Wi-Fi password or Security Key.
5. Type in: rvwifi1234 (all lower case, no gaps).
6. Click the: 'Connect Automatically' Box.
7. Click: 'Connect'.

Setting your Wi-Fi Password

One of the great features of RV Wi-Fi is the security it provides whilst using the internet. This section provides step-by-step instructions on setting your Wi-Fi password.

1. Open the web/internet browser on your device and enter the address http://10.0.1.1 into the 'search' bar.
2. The RV Wi-Fi home page will appear.
3. You are about to enter the username and password. You MUST enter the username 'root' and the password 'admin'. Failure to do so will result in the router requiring resetting. The 'root' password CANNOT be changed and is prepopulated.
4. Select/click on the 'Network' tab.
5. Select/click on the dropdown box: 'Wireless'.
6. You will see two options here and will need to complete both. Choose the 5.8 option first as shown below. Select/Click on the 'Edit' box.
7. Go to the 'Interface Configuration' Section. Click on the 'Wireless Security' tab.
8. Next to the 'Key' drop-down box, click on the asterisk (⭐). This shows what the current Wi-Fi password is set to.
9. Delete the password, by backspacing or using the delete button. In the 'Key' box, type your new Wi-Fi password – your choice! (Your password must be a minimum of 8 characters, and it is case sensitive).
10. Click on the 'Save and Apply' button. The screen will indicate that it is 'waiting for configuration to apply'.

Wait for this to apply. Do not turn off your device during this time. You will see a countdown clock appear from 30 seconds.

The next screen will say 'Device Unreachable'. This is due to the password being changed and the two devices no longer recognising each other.

Connecting your device after changing the password

1. On your device (laptop/iPad/phone):
1. Go to: Settings ⚙️
2. Click on: Wifi ?
3. Wait for RV Wi-Fi to come up on the list. Click on this.
4. Your device will now tell you that your Wi-Fi password is incorrect (this is because you have just changed it).
5. Type in the 'new' Wi-Fi/Security Key' password that you have just set.
6. Remember that it is case sensitive and some devices will automatically capitalize the first letter.
7. Wait for your device to let you know that you are connected.
8. You are now ready to access the internet through your RV Wi-Fi 5G.

Need Help

For help with your RV Wi-Fi unit, please go to: info@rvwifi.com.au and a service agent will be in touch.