XPOWER Axial Fan Owner's Manual

Safety Instructions

⚠️ WARNING - READ AND SAVE THESE INSTRUCTIONS BEFORE USING THIS PRODUCT.

The use of electrical products may create hazards that include, but are not limited to injury, fire, electrical shock. Failure to follow these instructions may damage and/or impair its operation and void the warranty.

• Before operating, remove all packaging material and check for any damage that may have occurred during shipping or any missing items.
• Check household power supply to ensure it matches the appliance's specification.
• DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an authorized service facility for examination and/or repair.
• Use only on GFCI protected receptacles. Please contact a qualified electrician for verification and / or installation of a GFCI receptacle if necessary.
• DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
• DO NOT touch this appliance or the plug with wet hands or while standing in water.
• DO NOT operate the appliance in any pooled water.
• DO NOT use the product in areas where gasoline, paint or other flammable goods and objects are used or stored.
• DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the appliance and void the warranty.
• DO NOT cover the air inlet or outlet on the appliance.
• DO NOT direct the air flow at human faces or bodies.
• DO NOT allow children to play with this appliance.
• AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from power supply before servicing.
• Remove the power cord from the electrical receptacle by grasping and pulling on the power cord plug-end only, DO NOT pull the cord directly.
• DO NOT attempt to repair or adjust any electrical or mechanical functions of this appliance, as this may cause danger and void the warranty.
• If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.
• Store in a dry area, away from exposure to sunlight, extreme temperature and humidity, or other extreme environments, when not in use.
• DO NOT stack more than six units of this appliance.
• An electronic instruction manual can be obtained through manufacturer's website www.xpower.com.

Items Included

• Axial Fan x 1
• Owner's Manual x 1

The package includes one Axial Fan unit and one Owner's Manual.

Parts Description

An exploded view diagram shows the components of the axial fan, with each part numbered and corresponding to the list below:

• (1) Front Grille Cover
• (2) Motor
• (3) Housing
• (4) Additional Electrical Receptacle
• (5) Capacitor
• (6) Housing Handle
• (7) Switch Plate
• (8) Rack Handle
• (9) Rubber Washer
• (10) Rack
• (11) Fan
• (12) Rear End Cover
• (13) Rear Grille Cover
• (14) Power Cord

Axial Fan Introduction

XPOWER Axial Fans are designed to offer efficient air circulation and ventilation with high and long-distance focused airflow.

They are ideal for air circulation and ventilation in janitorial/sanitation jobs, water damage restoration, and more.

Operation Guide

Speed Switch

The fan features a speed control dial with positions: OFF, 1, 2, 3, 4.

• Turn to the “OFF” position to switch the Axial Fan OFF.
• Turn to any speed position (1-4) to switch the Axial Fan ON.
• Turn clockwise to set the desired speed. There are 4 speeds: 4, 3, 2, 1, where “4” is the highest speed and “1” is the lowest speed.

Additional Electrical Receptacle (Daisy Chain)

The fan includes an additional electrical receptacle that allows other appliances to be plugged in. These appliances will operate whether the Axial Fan is on or off.

Important: The total amperage of all plugged-in appliances must be lower than the amperage instructed (10 AMPS MAX WITH THIS UNIT ON, 12 AMPS MAX WITH THIS UNIT OFF). Different models may have varying instructions.

If the Axial Fan or a plugged-in appliance stops working, press the RESET BUTTON to reset the circuit.

Adjust Operation Position

The Axial Fan features 360° Rotation. To adjust the fan's position:

• Tilt the Axial Fan to the desired angle.
• Screw on the rack handles to secure the fan's position.

The fan can direct airflow in various ways: straight forward, dispersed outwards, or upwards.

Transportation

Lift the Axial Fan using the handle located on the top of the unit.

User Maintenance Instructions

Frequent maintenance is recommended to prevent appliance failure and voiding the warranty.

• When not in use, unplug and store the appliance in a dry and cool indoor place, out of reach of children.
• Before performing any maintenance or cleaning, always disconnect the Axial Fan from its power source.
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water directly.
• Check if the grille covers are clean. Remove dirt or any other objects that could block the air inlet and air outlet.

Fasten the Rack Handles

To prevent possible injury, when finished using the appliance, position the Axial Fan UPRIGHT.

Fasten the rack handle to lock the position of the Axial Fan.

Organize the Power Cord

Wrap the power cord around the housing.

Clip the cord to the cord clip on the plug.

Stack Multiple Units

Stack the Axial Fans on their sides, aligning the air inlets of both units.

WARNING: Do not stack more than six units of this appliance. The stacking function is not secure during transportation.

Troubleshooting Guide

If troubleshooting does not resolve your problem, please contact XPOWER or other parties authorized by XPOWER for further instructions.

Technical Specification

If your product(s) is not listed above, please visit www.xpower.com for more information.

XPOWER Limited Warranty (USA)

1 YEAR LIMITED WARRANTY

XPOWER-branded products purchased in the U.S. from authorized distributors include a 1-year limited warranty. Contact XPOWER to confirm warranty information about your product(s).

This limited warranty covers defects in materials and workmanship in XPOWER-branded products, purchased in the U.S. ONLY. Local warranty policy (if any) in your country will cover products purchased outside the U.S.

IMPORTANT:

• Please finish the online warranty registration before usage. Visit www.xpower.com/service-support/warranty-registration.
• This Limited Warranty applies with its own timeliness. Contact XPOWER or visit www.xpower.com for more information.

Items Not Covered by Warranty:

• Power cord, filters or any other components considered as "consumable parts" by XPOWER.
• Normal wear and tear.
• Problems resulting, directly or indirectly, at XPOWER's sole discretion, from:
  • External causes such as accident, abuse, misuse or problems with electrical power supply.
  • Disassembling, servicing or modification not authorized by XPOWER.
  • Usage not accordant with product instructions stated in Owner's Manual.
  • Failure to follow product instructions or lack of necessary maintenance stated in Owner's Manual.

Before contacting XPOWER:

• Consult this Owner's Manual and follow the instructions of the troubleshooting guide.
• Access www.xpower.com for more advice and information that could be helpful to address your problems.

Additional Assistance from XPOWER:

• Email: info@xpower.com.
• Call XPOWER U.S. Customer Service Department at 855-855-8868 or other numbers provided on www.xpower.com.
• Visit XPOWER U.S. Head Office at 240 Clary Ave., San Gabriel, CA 91776 or the most current address provided on www.xpower.com.

Please have your original proof of purchase and the serial number(s) of your product(s) ready when you contact XPOWER.

Returning Unit for Service or Replacement:

• Request a RMA (Return-Merchandise-Authorization) number.
• Use the original or an equivalent packaging, prepay shipping charges at your own expense to the address provided by XPOWER, with the RMA number on the shipping label or the packaging.
• Include all the original parts and components.

XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any. For products under warranty, XPOWER will pay to ship the repaired or replaced product(s) to you if you use an address within the Contiguous United States. Otherwise, XPOWER will ship the product(s) to you at your own expense.