PXN V10 Ultra Direct Drive Racing Wheel

01 System Requirements

Supported Platforms: PC, PS4, X-ONE, X-SERIES XIS

PC System Requirements: Windows 7/8/10/11

Note: Requires the original controller for guidance on PS4 and X-ONE/X-SERIES XIS platforms.

02 Product Overview

The steering wheel features an LED indicator, A/B/X/Y buttons, D-pad, left and right paddles, R1/R2 and L1/L2 buttons, a HOME button, and a Function button. The base unit includes ports for PC/Console connection, an Emergency Switch, Shifter, Pedals, Power (DC IN), and other accessories, along with a controller port.

03 Product List

• 1x Steering Wheel
• 1x Pedal set
• 1x Power Adapter
• 1x Micro to USB-A Cable
• 1x TYPE-C to USB-A Cable
• 1x TYPE-C to TYPE-C Cable
• 1x Dual Ended RJ11 Connector Cable
• 2x Mounting Clamps
• 9x M6 Nuts
• 10x M6 Washers
• 1x Cable Clip
• 2x Allen Screws (for clamp)
• 8x Allen Screws (for mounting)
• 1x 4mm Wrench
• 2x Allen Screws (for pedals)
• 7x Allen Screws (for pedals)
• 1x M6 Double Open-End Wrench

04 Installation Method

05 Use on PC

1. Step 1: Connect the pedals and other accessories to the corresponding ports on the back of the wheel base.
2. Step 2: Install the base securely and connect it to the power adapter.
3. Step 3: Use the TYPE-C data cable to connect the base to the PC.
4. Step 4: After the connection is successful, the base will perform a self-check and reset, and the default indicator will stay on.

06 Use on PS4

1. Step 1: Connect the shifter and pedal to the corresponding ports on the base.
2. Step 2: Install the base securely and connect it to the power adapter.
3. Step 3: After the original PS4 controller is turned off, use a Micro USB data cable to connect the original PS4 controller to the controller guide port on the base.
4. Step 4: Use a TYPE-C data cable to connect the wheel base to the PS4 console and turn on the PS4.
5. Step 5: Press the HOME button on the steering wheel. Once the connection is successful, the base will perform a self-check, return to the center position, and the default indicator will stay on.

07 Use on X-ONE/X-SERIES XIS

1. Step 1: Connect the shifter and pedal to the corresponding ports on the base.
2. Step 2: Install the base securely and connect it to the power adapter.
3. Step 3: After the X-ONE/X-SERIES XIS original controller is turned off, use a Micro USB or TYPE-C cable to connect the X-ONE/X-SERIES XIS original controller to the controller guide port on the base.
4. Step 4: Use a TYPE-C cable to connect the wheel base to the X-ONE/X-SERIES XIS console, and turn on the X-ONE/X-SERIES XIS.
5. Step 5: Press the HOME button on the steering wheel. After the connection is successful, the base will perform a self-check and return to the center position. The default indicator will stay on.

08 App Functions

Install the "PXN NEXUS" app on your phone, then enable Bluetooth and grant the required location permissions. You do not need to pair the device with your phone; simply open the app to explore its features.

Download for iOS: Search for "PXN NEXUS" in the App Store.

Download for Android: Search for "PXN NEXUS" in the Google Play.

A QR code is provided for downloading the "PXN NEXUS" mobile application, which allows for setting effective rotation degree, adjusting force feedback, performing function testing, and updating firmware.

09 Product Specifications

▲ Warning - Safety

When connecting, installing, and removing this product, apply appropriate force. Do not twist or pull the cables.

Avoid splashing any liquids onto the product or its ports.

Keep this product in a dry place. Do not expose it to fire, or environments with high humidity, temperature, or smoke.

Please use the power cord provided with the base and do not use any other power cord. Do not use the power cord if the cable or its connector is damaged, cracked, or broken.

Make sure the power cord is properly plugged into the electrical outlet and connected to the connector on the back of the base. The power socket must be located near the device and must be easily accessible.

Do not disassemble, modify, or attempt repairs on your own. Any maintenance must be performed by the manufacturer, their authorized representative, or qualified technicians.

Only use accessories/components specified by the manufacturer.

If this product exhibits any unusual noises, heat, or odors, please cease use immediately.

If the product is not to be used for a long time, please disconnect the power cord from the power socket.

Ventilation

Make sure that none of the ventilation holes on the base are blocked. For optimal ventilation, ensure the following:

• Keep the base at least 10cm away from any wall.
• Do not place the base in any confined space.
• Do not place any covering on top of the base.
• Please avoid dust accumulation in the ventilation holes.

Temperature

When the temperature exceeds 60°C due to ventilation, environment, or usage, the base motor will automatically reduce the output power.

When the temperature exceeds 70°C due to ventilation, environment, or usage, the base motor will automatically shut down.

Do not touch any part of the motor when the output power of the base motor is reduced or power OFF due to high temperature.

▲ Warning - Potential for Injury from Force Feedback and Repetitive Actions

To avoid possible injuries caused by force feedback and repetitive actions, please refer to the usage suggestions:

• Avoid playing games for too long.
• Rest for 10 to 15 minutes after every hour of using this product.
• If you feel any fatigue or pain in your hands, wrists, arms, legs, or feet, stop playing and rest for a few hours before resuming the game.
• If symptoms or pain persist after resuming gaming, stop gaming and consult a physician.

Keep out of reach of children.

Make sure the racing wheel base is secured as per the instructions in this manual.

This product is intended for use by individuals aged 16 and older.

▲ Heavy Item

Be careful not to drop the product on yourself or anyone else!

Automatic Calibration

After the power adapter is connected to the product and powered on, self-calibration can be performed automatically. During the self-calibration process, the motor will perform a self-test by rotating left and right and then stop in the center position.

▲ Warning

To avoid possible incorrect calibration or personal injury, do not touch the product during the self-calibration process.

If the product appears to be operating improperly or is improperly calibrated: Turn off the console/PC and completely disconnect the power supply of this product. Then reconnect the power cord and other accessories, restart the console or PC, and then re-enter the game.

For safety reasons, never use the pedal set barefoot or with only socks on your feet. PXN® is not responsible for injuries caused by using the pedals without shoes.

▲ Warning - Pedal Clamping Hazard While Playing Games

Keep the pedal set out of the reach of children.

Never place your fingers on or anywhere near the sides of the pedals during play.

Never place your fingers on or anywhere near the rear base of the pedals during play.

Never place your fingers on or anywhere near the front base of the pedals during play.