PXN V900 Racing Wheel

Introduction

Thank you for choosing PXN's product and supporting the brand. Please read the manual carefully before using.

Product Features

1. Compatible with PC/PS3/PS4/XBOX ONE/SWITCH.
2. Intelligent dual-core for two modes of X-input and D-input in PC, suitable for different games.
3. Buttons are programmable according to your habits.
4. Switch between 270° and 900° rotation output.
5. Support audio communication function at PS4/XBOX ONE.
6. Built-in double vibration motors for a realistic gaming experience.
7. Racing Wheel with ergonomic structure design.

What's in the box

• Racing Wheel
• Foot Pedal
• Mounting Clamps
• Sucker
• Manual

Button Layout

Racing Wheel Controls

The racing wheel features:

• L-Paddle
• R-Paddle
• D-Pad (Directional Pad)
• (A, B, X, Y) Buttons
• Function Buttons
• LED Indicator
• PROG Button
• MODE Button

Pedal Unit Controls

The pedal unit includes:

• Brake Pedal
• Throttle Pedal

System Requirements

Supported Platforms: PC/PS3/PS4/XBOX ONE/SWITCH

PC System: Windows 7/8/10

Installation

Connect the Foot Pedal and USB cables as shown in the diagram. The diagram illustrates connecting the USB cable from the racing wheel to a USB port, the pedal unit to the racing wheel, and optionally a headset to the audio jack.

Connections shown:

• USB Port (for connecting the wheel to the console/PC)
• Audio (for headset connection)
• Pedal (for connecting the foot pedal unit)
• USB Cable

Mounting Clamps

The Racing Wheel is equipped with a clamping system for mounting to a table. Follow these steps:

1. Match the sucker with the racing wheel, and then rotate to lock.
2. Rotate clamp knobs to loosen clamps.
3. Match the clamps with the Racing Wheel.
4. Mount the Racing Wheel to a table and then rotate clamp knobs to tighten clamps.

Using for PC

Switch MODE between X-input and D-input by pressing the "MODE" button for 3 seconds. The Racing Wheel defaults to X-input mode when connecting to a computer, indicated by a red LED light staying on.

X-input mode

X-input MODE is compatible with Games for Windows. It is a plug-and-play mode. Recommended Games: "Need for Speed 13" and above, "Dirty2/3/4", "Ridge Racer", and so on.

D-input mode

D-input MODE is compatible with early PC racing games. Recommended Games: "Need for Speed 1-12", "Euro Truck Simulator", and so on.

The diagram shows the racing wheel connected to a PC.

Using for PS3 Console

1. Connect the Racing Wheel to the USB port of the PS3.
2. When the Red LED light stays on, it can start to play games or set functions on PS3.

The diagram shows the racing wheel connected to a PS3 console.

Using for PS4 Console

1. Power off the original controller of PS4.
2. Connect the Racing Wheel with the PS4 controller by a Micro USB cable.
3. Plug the USB of the Racing Wheel into the PS4 USB interface.
4. Press the "MODE" button. After that, the Racing Wheel can start to play games and settings.

The diagram shows the racing wheel connected to a PS4 controller and console.

Using for XBOX ONE Console

1. Power off the original controller of XBOX ONE.
2. Connect the Racing Wheel with the console controller by a Micro USB cable.
3. Plug the USB of the Racing Wheel into the console USB interface.
4. Press the "MODE" button. After that, the Racing Wheel can start to play games and settings.

The diagram shows the racing wheel connected to an XBOX ONE controller and console.

Using for Nintendo Switch

System Settings: Enter System settings ⚙️, select Controllers and Sensors, then select Pro Controller Wired Communication. Set the option to ON.

Connect With Switch Console

1. Connect the TYPE-C OTG with the USB of the Racing Wheel.
2. Connect the USB main cable of the Racing Wheel to the Switch Console.
3. Power on the Switch console to play.

The diagram shows the connection to the Switch console using a TYPE-C OTG adapter.

Connect With Switch dock

1. Place the Switch dock and ensure successful connection.
2. Plug the USB of the Racing Wheel into the Switch dock and power on the Switch console.

The diagram shows the connection to the Switch dock.

Sensitivity Setting

Adjust the racing wheel's sensitivity:

High sensitivity:

Press the "PROG" Button, the Red LED flashes quickly, then press the D-pad "↑" button. (Recommended for PS3, PS4, XBOX ONE consoles)

Medium sensitivity:

Press the "PROG" button, the Red LED flashes quickly, then press the D-pad "←" button.

Low sensitivity:

Press the "PROG" button, the Red LED flashes quickly, then press the D-pad "↓" button. (Recommended for PC platform)

Customize Maximum Effective Turn Radius

Max effective turn radius: For example, the Racing Wheel's maximum effective turn radius can be set to 180°. The actual maximum turn radius is achieved when moving 90° to the left or right; rotation exceeding 90° is considered invalid rotation.

How to setting?

1. Switch to 900° rotation.
2. Press the "PROG" button; the Red LED flashes quickly.
3. Move the Racing Wheel to the desired angle (more than 60°), then press the "OPTIONS" button; the Red LED will stay on.

Programmable Buttons Function

Setting buttons: L-paddle, R-paddle, L-pedal, R-pedal, L3, R3.

Buttons can be programmed: A, B, X, Y, L1, L2, R1, R2.

How to setting?

1. Press "PROG", Red LED light flashes quickly.
2. Press the desired setting button; the Red LED light flashes slowly.
3. Press the programmable buttons; the Red LED is on, and the setting is complete.

How to clear button programmed function?

Clear single button

1. Press "PROG", Red LED light flashes quickly.
2. Press the setting button twice; the Red LED is on, and the clear is complete.

Clear all buttons

1. Press "PROG", Red LED light flashes quickly.
2. Press the "OPTIONS" button for 4 seconds; the Red LED will be on, all programmed buttons will be restored, and the racing wheel's rotation sensitivity will return to the highest sensitivity.

Notes

1. Press the "PROG" button, the Red LED flashes quickly, and then press the "PROG" button again to exit programming. The previous data does not change.
2. Press the "PROG" button, the Red LED flashes quickly. If there is no action within 10 seconds, the programming will automatically exit.

Voice Communication Function

The Racing Wheel supports connecting with a headset and microphone, allowing players to connect a headset for voice communication on PS4 / XBOX ONE consoles.

The diagram shows a racing wheel connected to a headset.

Attentions

Important Safety Information:

1. Avoid fierce vibration. Do not take apart, revise, or mend the product yourself.
2. Do not let water or other liquids enter the Racing Wheel to prevent damage.
3. Do not store in places with high humidity, extreme temperatures, heavy oil, or smoke.
4. Do not drop the Racing Wheel into fire; explosion danger may be caused by the built-in battery.
5. Children should use this product under the custody of adults.

Product Specification