Product Overview

The Televes DINOVA BOSS antenna is designed with a low visual impact, making it ideal for installations where aesthetics are important, such as on facades, in historic buildings, or on balconies of apartments and villas. It is a 7-element Yagi directional antenna built with Microstrip technology.

The integrated BOSS Tech system automatically controls the received signal level, ensuring an optimal output level regardless of whether the signal is too high or too low. Its new design, featuring TForce technology, makes this intelligent device even more versatile. The antenna is RED compliant.

Specifications

Key Features and Advantages

• High Dynamic Range: Allows reception of quality TV signals in a variety of critical situations, from areas with very weak signals to structures with high reception levels.
• Increased DTT coverage area.
• High gain.
• Stable Reception: Capable of withstanding signal variations or "fading" without compromising television signal reception.
• Supports installation in both horizontal and vertical polarization.
• Integrates a SAW (Surface Acoustic Wave) filter for high-cut LTE interference, caused by the use of 5G/4G devices.
• Two Operating Modes:
  • Intelligent Mode (powered): The BOSS system provides automatic regulation to correct signal fluctuations and maintain an optimal output level.
  • Passive Mode (unpowered): The signal is allowed to pass through without amplification.
• Corrosion Protection:
  • Fiberglass-reinforced pole mount support: does not rust, reduces antenna weight, and improves performance in adverse conditions.
  • Pole mount with RPR (Resistant Protective Coating) for a robust fixing.
  • High-resistance radome protects against salinity, humidity, and other adverse climatic phenomena (IP 53 rating).
• Low power consumption in intelligent mode.
• Easy mounting. Optional kits with all necessary accessories for installation can be purchased.

Technology Spotlight: TForce

Televes has moved beyond the silicon era, introducing a new era in the design of electronic components that enable integrated circuits to operate in the microwave frequency band. TForce technology is based on the production of semiconductor components like Gallium Arsenide (GaAs), allowing for products with unparalleled functionality.

Televes has reinvented the concept of the antenna. Previously, an antenna was merely the receiving element in a TV system where gain and directivity were the primary aspects. The introduction of an intelligent device like BOSS has equipped the antenna with a system capable of receiving very weak signals without the risk of receiving excessively strong ones. This management of fluctuations has resulted in the "Dynamic Range" concept becoming the key quality parameter.

The creation of a BOSS system with TForce technology, based on MMIC components, is a significant milestone in optimizing dynamic range. This same technology, which enabled the recovery of lost signals from distant satellites, is now used to increase coverage range in DTT installations.

FIBERGLASS REINFORCED: Enhancing Our Products

Plastic materials reinforced with fiberglass are more durable, antimagnetic, fire-resistant, and provide excellent electrical insulation. The primary reasons fiberglass enhances Televes antennas are:

• Corrosion immunity.
• Reduced weight, facilitating installation.
• Flexibility, improving material performance in adverse climatic conditions.

NOVA Series

This special series of antennas is recommended for satisfying signal reception in atypical installation situations.

• Designed for a low visual impact, pleasant, and discreet aesthetic, ideal for installations where appearance is important.
• Intelligent antennas incorporating the BOSS system, ensuring the best possible output level for good reception quality.
• LTE Ready: Features an electronic filter to eliminate interference caused by LTE signals.
• Constructed with materials offering high resistance to salinity, humidity, and other adverse climatic elements, providing an IP 53 protection index.
• Low power consumption and easy mounting. A complete kit with all necessary installation accessories is available for purchase.
• European production ensures adherence to strict quality controls for high reliability.

Example of application.

Connection Diagrams

Graphical Documentation

Technical Characteristics: Ref. 144022

*¹ Gain varies automatically based on input signal level.