Antenna DINOVA BOSS (LTE700, 20 Digital Dividend)

This is a low visual impact antenna designed for locations where aesthetics are important. This characteristic makes it ideal for installations on facades, buildings, historic centers, and even villas or apartments (balconies). The antenna is a 7-element directional Yagi type, built with Microstrip technology.

The BOSS Tech system automatically controls the received signal level (whether very high or very low) to always provide the optimal output level. Its new design with TForce technology makes this intelligent device even more versatile.

RED compliant.

Other Characteristics

• Color: White
• Power Supply: Not included
• Supply Method: Single packaging

Physical Data

• Net Weight: 820.00 g
• Gross Weight: 820.00 g
• Width: 345.80 mm
• Height: 318.00 mm

Packaging

• Box: 1 pc.
• Depth: 77.00 mm

Key Features

• High dynamic range: Allows reception of quality TV signals in various critical situations, from areas with very weak signals to structures with high reception levels.
• Increased DTT coverage area.
• High gain.
• More stable reception: Capable of withstanding signal variations or fading without compromising TV signal reception.
• Allows installation in both horizontal and vertical polarization.
• Integrates a SAW filter for high-cut LTE interference, caused by 5G/4G devices.
• Two operating modes:
  • Intelligent mode (when powered): BOSS system offers automatic regulation to correct signal fluctuations and maintain optimal output level.
  • Passive mode: Signal passes through without power.
• Corrosion Protection:
  • Reinforced mast mounting bracket with fiberglass: rust-proof, reduces antenna weight, improves performance in adverse conditions.
  • Mast attachment with RPR (Reactive Protective Coating) for robust fixing.
  • High-resistance radome against salinity, humidity, and other adverse climatic phenomena (IP 53).
• Low power consumption in intelligent mode.
• Easy mounting. Kits with necessary accessories can be purchased separately.

TForce Technology

Televes surpasses the silicon era, introducing a new era in electronic component design, enabling integrated circuits operating in the microwave frequency band. TForce technology is based on semiconductor components like Gallium Arsenide (GaAs), providing products with unparalleled functionality. Televes has reinvented the antenna concept. Previously, an antenna was just the receiving element in a TV system where gain and directivity were paramount. The introduction of an intelligent device like BOSS equipped the antenna with a system capable of receiving very weak signals without the risk of receiving excessively strong ones; this management of fluctuations has resulted in the concept of "Dynamic Range" being the key quality parameter. The creation of a BOSS with TForce technology, based on MMIC components, is a milestone in dynamic range optimization. This same technology, which enabled the recovery of lost signals from distant satellites, is now used to increase coverage range in DTT installations.

FIBERGLASS REINFORCED: HOW FIBERGLASS IMPROVES OUR PRODUCTS?

Fiberglass-reinforced plastics last longer, are non-magnetic, fire-resistant, and provide excellent electrical insulation. The main reasons fiberglass improves their antennas are:

• Immunity to corrosion.
• Reduced weight, facilitating installation.
• Flexibility, improving material performance in adverse climatic conditions.

NOVA Series

This special series of antennas is recommended for signal reception in atypical installation situations.

• Designed for low visual impact, pleasant, and discreet aesthetics, ideal for installations where appearance is important.
• Intelligent antennas incorporating the BOSS system, offering the best possible output level for good reception quality.
• LTE Ready: Incorporates an electronic filter to eliminate interference caused by LTE signals.
• Constructed with materials highly resistant to salinity, humidity, and other adverse climatic elements, providing an IP 53 protection index.
• Low power consumption and easy mounting. A complete kit of installation accessories can be purchased.
• European production ensures strict quality controls for high reliability.

Example of Application

Diagrams

Connection Diagrams

The diagrams illustrate typical installation setups. One shows an antenna powered by 12-24 Vdc, connected via a power inserter (196-264 Vac) to distribute MATV signals to multiple televisions. Another shows a similar setup using a 12/24 Vdc power source, like a battery, to power the antenna and distribute MATV signals.

Radiation Pattern

A polar radiation pattern diagram for UHF frequencies is provided. It shows the antenna's directional characteristics, plotting signal strength (in dB) against angle (in degrees). Two curves represent different polarizations: P.E. (likely Horizontal Polarization) and P.H. (likely Vertical Polarization), illustrating the main lobe and side lobes.

Technical Characteristics (Ref. 144021)

* Gain automatically varies based on input signal level.