Reacher GX Alarm Clock User Manual

Product Overview

The Reacher GX is a portable alarm clock designed for ease of use and functionality. It features adjustable wake-up modes, vibration intensity, and auto-dimming capabilities.

Getting Started

Powering On the GX

Locate the power switch on the side of the GX. Slide the switch to the [power switch] [on/off] position. If the screen remains off, adjust brightness or charge the device.

Charging the GX

1. Plug the charger into a standard outlet.
2. Align the bottom's two magnetic charging ports with the two points on the charging base and connect to the charger.
3. When charging starts, the indicator blinks for 5 seconds and then shows the current battery level. All four dots light up when fully charged.

Notice: To charge the device, the back side (marked with model and brand) must face inward. Placing it outward will disable charging.

Notice: Please use the official standard adapter (5V1A) to avoid excessive current leading to short-circuit machine damage.

Button Functions

• 1. Slide to [power on]/[power off]
• 2. Slide to select Wake-up mode
• 3. Press to enter Time setting
• 4. Press to enter Alarm setting
• 5. Press to enter [snooze] mode / Long press to enter [button lock] mode
• 6. Ambient light sensor
• 7. Previous and Next / Volume - & Volume+
• 8. Press to select Vibration intensity
• 9. Slide to turn [auto dim] [on/off]
• 10. Dial to manually adjust brightness

Settings

Time Setting

Notice:

• All operations will auto-exit and save settings if no action is taken within 5 seconds.
• Please check "AM" & "PM" indicator when setting time and alarm.

Steps:

1. Press [button 3] → hour → minute → 12H/24H format.
2. Press [button 7] (`+`/`-`) to change the selected content.
3. Press [button 3] to confirm selected content.

Example: To correct the time from "AM 12:00" to "AM 12:30":

1. Press [button 3] once, "12" flashes. Press [button 3] again, "00" flashes.
2. Press [button 7] (`+`) until "00" becomes "30".
3. Press [button 3] again, "12H" flashes.
4. Press [button 3] again to finish setting.

Alarm Setting

1. Press [button 4] → hour → minute → ringtone → volume.
2. Press [button 7] (`+`/`-`) to change the selected content (hour/minute/ringtone/volume).
3. Press [button 4] again to finish setting.

Wake-up Mode Setting

Slide [button 2] to select the wake-up mode: [Sound Only] / [Sound + Vibration] / [Vibration Only].

Attention: When the clock is in the charging cradle, it automatically switches the wake-up mode to sound mode. It automatically switches back to the original wake-up mode after leaving the charging cradle.

Stop the Alarm

When the alarm goes off, you have 2 options to stop the alarm:

1. Press [button 5] ([snooze]) for a 9-minute snooze.
2. Press [button 4] to stop the alarm when it's ringing. The alarm will go off the next day.

Enable/Disable Alarm

Hold [button 4] for 2 seconds to enable or disable the alarm. If the [alarm on] icon displays, the alarm is enabled. Otherwise, it is disabled.

Vibration Intensity Setting

Press [button 8] to select vibration intensity from P1 (Low) to P5 (High).

Dimmer Setting

Auto Dimmer Switch

Turn on the auto dimmer, and the display brightness will change according to the environment. Do not cover the ambient light sensor on the top.

If you want to manually adjust the display brightness, turn off the auto dimmer and slide the side wheel dial [button 10].

Note: If you turn on the auto dimmer, do not cover the ambient light sensor on top of the device.

Button Lock

Hold the [button 5] ([snooze]) for 8 seconds to lock or unlock all controls. The [lock] icon will appear when the lock is activated and disappear when it is unlocked.

Support & Warranty

Reacher offers a 45-day refund policy and a 12-month warranty for products purchased from their store.

Email: customer@reachershop.com

For warranty/support, you can also scan the QR code and input item model GX to get our Reacher product instructional video.

Link to YouTube Channel: Reacher YouTube Channel

Safety Instructions

• To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
• To avoid damage, never place the unit near radiators, in front of heating vents, under direct sunlight, or near water.
• When disconnecting the power supply, pull the plug first. Do not pull the cord itself. Never handle the power plug with wet hands, as this could cause fire or electric shock.
• Do not open the housing.
• Do not twist or pinch the power supply cord. If the plug or power supply cord needs to be replaced, ensure that it complies with the manufacturer's recommendation.