Introduction
The Kenton Modular Solo is a versatile MIDI-to-CV converter designed for Eurorack modular synthesizers. It offers more than standard MIDI-to-CV conversion, featuring a built-in LFO, portamento, and numerous other functions to enhance your modular synth experience. This manual provides detailed information on its features, connections, and operation to ensure optimal use.
Key Features
- MIDI to CV/Gate conversion
- Integrated LFO
- Portamento control
- Multiple auxiliary outputs (AUX 1-4)
- Clock outputs (Clock 1 & 2) and Sync 24
- Extensive parameter control via MIDI
- Preset memory for storing setups
Connections
The Modular Solo facilitates various connections, including MIDI IN/OUT, CV OUT, Gate/S-Trig OUT, and multiple AUX outputs. It also supports clock synchronization via DIN sync.
Parameter Guide
Explore a wide range of parameters to customize the Modular Solo's behavior. These include MIDI receive channel, note priority, pitch bend range, LFO settings, auxiliary output control, and clock output configurations. Detailed explanations for each parameter are provided within the manual.
Tuning and Setup
Learn how to tune the Modular Solo to your specific analog synth and configure its outputs for optimal performance. The manual covers essential setup steps, including CV scaling (V/oct or Hz/V) and gate type selection.
Troubleshooting and Support
Find solutions to common issues and learn about advanced features like the MIDI analyzer mode. For further assistance, visit the Kenton Electronics website.
