MiBoxer B9 SPI Panel Remote Control

Product Features

• Align color and adjust SPI strip length (pixel count), select dynamic mode, control speed, and save up to 8 scenes.
• 2.4GHz wireless transmission technology with high transmission speed, stable signal, and strong anti-interference capabilities.
• Control multiple devices simultaneously, supporting communication with multiple devices.
• Change dynamic mode, color, brightness, and dynamic lighting function.
• Edit width and color for dynamic mode.
• Set ON/OFF time and color.
• Works with multiple controllers (control distance up to 30 m).
• Magnetic holder for easy installation.
• Wide application for commercial or household lighting, creating ambient lighting.

Product Parameters

Dimensions: 106mm x 19mm x 146mm

Indication

Visual indicators for different modes:

• Static Mode: For static lighting.
• Dynamic Mode: For dynamic lighting effects.
• Music Mode: For lighting synchronized with music.
• Scene: For pre-set lighting scenes.

Remote controls:

• Color: Adjusts the color of the LEDs.
• Brightness: Adjusts the overall brightness.
• Speed: Controls the speed of dynamic effects.
• Dimming: Fine-tunes brightness.
• Slot: Selects saved scenes or modes.

Button Explanation

• Static Mode Button: Activates pure static lighting.
• Dynamic Mode Button: Short press to cycle through dynamic modes.
• Music Mode Button: Short press to switch between music modes. (Note: In music mode, a second press is required for other operations).
• Scenes Button: Operates in dynamic and music modes. Short press to access saved scenes. Long press to save the current scene while in dynamic mode.
• Lock Button: The remote auto-locks after 15 seconds of inactivity. Short press to unlock. Press and hold for 3 seconds to turn off the remote.

Sliders:

• RGB Slider: Touch to adjust RGB color values or dim the LEDs.
• Pixel Point Slider: Touch to set the length and width of the LED strip (refer to specific setting instructions).
• Speed Slider: Touch to adjust the speed of dynamic effects.
• Brightness Slider: Touch to dim the LEDs. In music mode, this slider can adjust the sensitivity of the microphone chip.

Pairing and Unpairing

The controller must be paired with the remote before use.

Pairing Instructions:

1. Turn off the light for 10 seconds, then turn it back on.
2. Short press the "ON" button 3 times within 3 seconds.
3. Pairing is successful when the indicator light blinks slowly 3 times.

⚠️ Note: If the light does not blink, pairing failed. Repeat the steps. Re-pairing is not possible if the remote is already paired.

Unpairing Instructions:

1. Turn off the light for 10 seconds, then turn it back on.
2. Short press the "ON" button 5 times within 3 seconds.
3. Unpairing is successful when the indicator light blinks quickly 10 times.

⚠️ Note: Unlinking fails if the light does not flash. Repeat the steps. No need to unlink if the light was never linked.

Length Setting (Pixel Count: min 8pt, max 2048pt)

Press and hold the "ON" button for 5 seconds until the white light turns on and the last pixel blinks.

• Slide to change the length.
• Short press to add one pixel; long press to add pixels continuously.
• Short press to decrease one pixel; long press to decrease pixels continuously.

Short press the "ON/OFF" button to exit settings when complete.

Width Setting for Dynamic Mode

Slide the pixel count to change the number of points and achieve different lengths for dynamic modes with various sections.

Setting ON/OFF Time and Color

Press and hold the "OFF" button for 5 seconds to enter the ON/OFF mode.

• Slide the "Speed" slider to set the ON/OFF time.
• Slide the "RGB" slider to set the color for ON/OFF.

Short press the "ON/OFF" button to exit settings when complete.

Installation

The controller must be installed correctly for operation. Diagrams show wall mounting and wiring connections.

Power Input Options:

• Input 1: 3V (2*AAA Batteries)
• Input 2: AC90~120V or AC180~240V
• Power Supply: DC 3.3V

⚠️ Note: The power supply specified by MiBoxer must be purchased separately.

Disassembly

Diagrams illustrate the process of removing the device.

Attention

1. Only compatible with MiBoxer SPI LED controllers.
2. Do not use the device in humid or hot environments. Remove the battery if the device is not in use. Store the device in a dry place or an environment with static electricity.
3. Do not use the device near metal or strong magnetic fields, as this can affect the signal and lead to loss of control range.

Compliance marks: CE, UKCA, RoHS. Made in China.