VEVELSTAD Bed Frame
IKEA Design and Quality
Parts List
| Part Description | Quantity | Part Number |
|---|---|---|
| Bolt | 12x | 10077870 |
| Spring | 4x | 10077870 |
| Clamp | 4x | 10080990 |
| Cap | 4x | 10080924 |
| Allen Key | 1x | 111631 |
| Allen Key | 1x | 111631 |
| Support Bar | 2x | 130445 |
| Slats | 6x | 10075106 |
Assembly Instructions
Follow these steps to assemble your VEVELSTAD bed frame:
-
Insert bolts (10077870) and springs (10077870) into the designated holes on the bed frame components. Use the Allen key (111631) to tighten.
Visual: Shows two bed frame parts being joined with bolts and springs, tightened with an Allen key.
-
Attach the support bars (130445) to the bed frame using the provided hardware. Ensure they are securely fastened.
Visual: Shows two support bars being attached to the main bed frame structure.
-
Insert the caps (10080924) into the ends of the bed frame tubes. Use a hammer to gently tap them into place.
Visual: Shows caps being hammered into the open ends of the bed frame tubes.
-
Attach the clamps (10080990) to the bed frame. These are used to secure the slats.
Visual: Shows clamps being attached to the sides of the bed frame.
-
Place the slats (10075106) onto the bed frame, resting them on the clamps. Ensure they are evenly spaced.
Visual: Shows slats being laid across the bed frame and secured by the clamps.
Care Instructions
Wipe clean with a cloth damped in a mild cleaner. Wipe dry with a clean cloth.
